RTI Connext .Net APIs
Version 6.0.1
|
If multicast loopback is disabled (this value is set to 1), then when sending multicast packets, RTI Connext will not put a copy of the packets on the loopback interface. This prevents applications on the same node (including itself) from receiving those packets.
This value is set to 0 by default, meaning multicast loopback is enabled.
Disabling multicast loopback (setting this value to 1) may result in minor performance gains when using multicast.
[NOTE: Windows CE systems do not support multicast loopback. This field is ignored for Windows CE targets.]