Durability and Persistence

Summary: APIs related to RTI Connext Durability and Persistence

RTI Connext offers the following mechanisms for achieving durability and persistence:

  • NDDSDurableWriterHistory

  • NDDSDurableReaderState

  • NDDSDataDurability

    To use the first two features, you need a relational database, which is not included with dds. Supported databases are listed in the Release Notes.

    These three features can be used separately or in combination.


    Durable Writer History

    This feature allows a DDS.DataWriter to locally persist its local history cache so that it can survive shutdowns, crashes and restarts. When an application restarts, each DDS.DataWriter that has been configured to have durable writer history automatically loads all the data in its history cache from disk and can carry on sending data as if it had never stopped executing. To the rest of the system, it will appear as if the DDS.DataWriter had been temporarily disconnected from the network and then reappeared.


    See also: NDDSDurableWriterConfiguration

    Durable Reader State

    This feature allows a DDS.DataReader to locally persists its state and remember the sequence numbers it has already received. When an application restarts, each DDS.DataReader that has been configured to have durable reader state automatically loads its state from disk and can carry on receiving data as if it had never stopped executing. Data that had already been received by the DDS.DataReader before the restart will not be provided to the application again

    Data Durability

    This feature is a full implementation of the OMG DDS Persistence Profile. The DDSDurabilityQosModule QoS lets an application configure a DDS.DataWriter such that the information written by the DDS.DataWriter survives beyond the lifetime of the DDS.DataWriter. In this manner, a late-joining DDS.DataReader can subscribe and receive the information even after the DDS.DataWriter application is no longer executing. To use this feature, you need RTI Persistence Service -- an optional product that can be purchased separately.


    Durability and Persistence Based on Virtual GUID

    Every modification to the global dataspace made by a DDS.DataWriter is identified by a pair (virtual GUID, sequence number).

    Several DDS.DataWriter entities can be configured with the same virtual GUID. If each of these DDS.DataWriter entities publishes a sample with sequence number '0', the sample will only be received once by the DDS.DataReader entities subscribing to the content published by the DDS.DataWriter entities.


    Global Dataspace Changes

    RTI Connext also uses the virtual GUID (Global Unique Identifier) to associate a persisted state (state in permanent storage) to the corresponding DDS entity.

    For example, the history of a DDS.DataWriter will be persisted in a database table with a name generated from the virtual GUID of the DDS.DataWriter. If the DDS.DataWriter is restarted, it must have associated the same virtual GUID to restore its previous history.

    Likewise, the state of a DDS.DataReader will be persisted in a database table whose name is generated from the DDS.DataReader virtual GUID


    History/State Persistence Based on the Virtual GUID

    A DDS.DataWriter's virtual GUID can be configured using DDS.DataWriterProtocolQosPolicy.virtual_guid. Similarly, a DDS.DataReader's virtual GUID can be configured using DDS.DataReaderProtocolQosPolicy.virtual_guid.

    The DDS.PublicationBuiltinTopicData and DDS.SubscriptionBuiltinTopicData structures include the virtual GUID associated with the discovered publication or subscription.

    Refer to the User's Manual for additional use cases.


    See also: DDS.DataWriterProtocolQosPolicy.virtual_guid DDS.DataReaderProtocolQosPolicy.virtual_guid.


    Configuring Durable Writer History

    To configure a DDS.DataWriter to have durable writer history, use the DDSPropertyQosModule QoS policy associated with the DDS.DataWriter or the DDS.DomainParticipant.

    Properties defined for the DDS.DomainParticipant will be applied to all the DDS.DataWriter objects belonging to the DDS.DomainParticipant, unless the property is overwritten by the DDS.DataWriter.


    See also: DDS.PropertyQosPolicy

    The following table lists the supported durable writer history properties.

    Durable Writer History Properties
    Property Description
    dds.data_writer.history.plugin_name Must be set to "dds.data_writer.history.odbc_plugin.builtin" to enable durable writer history in the DataWriter. This property is required.
    dds.data_writer.history.odbc_plugin.dsn The ODBC DSN (Data Source Name) associated with the database where the writer history must be persisted. This property is required.
    dds.data_writer.history.odbc_plugin.driver This property tells RTI Connext which ODBC driver to load. If the property is not specified, RTI Connext will try to use the standard ODBC driver manager library: UnixOdbc (odbc32.dll) on UNIX/Linux systems; the Windows ODBC driver manager (libodbc.so) on Windows systems).
    dds.data_writer.history.odbc_plugin.username Configures the username used to connect to the database. This property is not used if it is unspecified. There is no default value.
    dds.data_writer.history.odbc_plugin.password Configures the password used to connect to the database. This property is not used if it is unspecified. There is no default value.
    dds.data_writer.history.odbc_plugin.shared If set to 1, RTI Connext creates a single connection per DSN that will be shared across DataWriters within the same Publisher.

    If set to 0 (the default), a DDS.DataWriter will create its own database connection.

    Default: 0 (false)

    dds.data_writer.history.odbc_plugin.instance_cache_max_size These properties configure the resource limits associated with the ODBC writer history caches. To minimize the number of accesses to the database, RTI Connext uses two caches, one for samples and one for instances. The initial and maximum sizes of these caches are configured using these properties. The resource limits initial_instances, max_instances, initial_samples, max_samples and max_samples_per_instance in the DDS.ResourceLimitsQosPolicy are used to configure the maximum number of samples and instances that can be stored in the relational database. Default: DDS.ResourceLimitsQosPolicy.max_instances
    dds.data_writer.history.odbc_plugin.instance_cache_init_size See description above. Default: DDS.ResourceLimitsQosPolicy.initial_instances
    dds.data_writer.history.odbc_plugin.sample_cache_max_size See description above. Default: 32 (the minimum)
    dds.data_writer.history.odbc_plugin.sample_cache_init_size See description above. Default: 32
    dds.data_writer.history.odbc_plugin.restore This property indicates whether or not the persisted writer history must be restored once the DDS.DataWriter is restarted. If the value is 0, the content of the database associated with the DDS.DataWriter being restarted will be deleted. If the value is 1, the DDS.DataWriter will restore its previous state from the database content. Default: 1
    dds.data_writer.history.odbc_plugin.in_memory_state This property determines how much state will be kept in memory by the ODBC writer history in order to avoid accessing the database.

    When in_memory_state is equal to 1, instance_cache_max_size is always equal to DDS.ResourceLimitsQosPolicy.max_instances (it cannot be changed). In addition, the ODBC writer history will keep in memory a fixed state overhead of 24 bytes per sample. In this operating mode, the ODBC writer history provides the best performance. However, the restore operation will be slower and the maximum number of samples that the writer history can manage will be limited by the available physical memory.

    If in_memory_state is equal to 0, all the state will be kept in the underlying database. In this operating mode, the maximum number of samples in the writer history will not be limited by the physical memory available unless the underlying database is an in-memory database (TimesTen).

    Default: 1

    Configuring Durable Reader State

    To configure a DDS.DataReader with durable reader state, use the DDSPropertyQosModule QoS policy associated with the DDS.DataReader or DDS.DomainParticipant.

    A property defined in the DDS.DomainParticipant will be applicable to all the DDS.DataReader belonging to the DDS.DomainParticipant unless it is overwritten by the DDS.DataReader.


    See also: DDS.PropertyQosPolicy

    The following table lists the supported durable reader state properties.

    Durable Reader State Properties
    Property Description
    dds.data_reader.state.odbc.dsn The ODBC DSN (Data Source Name) associated with the database where the DDS.DataReader state must be persisted. This property is required.
    dds.data_reader.state.filter_redundant_samples To enable durable reader state, this property must be set to 1. Otherwise, the reader state will not be kept and/or persisted. When the reader state is not maintained, RTI Connext does not filter duplicate samples that may be coming from the same virtual writer. By default, this property is set to 1.
    dds.data_reader.state.odbc.driver This property is used to indicate which ODBC driver to load. If the property is not specified, RTI Connext will try to use the standard ODBC driver manager library: UnixOdbc (odbc32.dll) on UNIX/Linux systems; the Windows ODBC driver manager (libodbc.so) on Windows systems).
    dds.data_reader.state.odbc.username This property configures the username used to connect to the database. This property is not used if it is unspecified. There is no default value.
    dds.data_reader.state.odbc.password This property configures the password used to connect to the database. This property is not used if it is unspecified. There is no default value.
    dds.data_reader.state.restore This property indicates if the persisted DDS.DataReader state must be restored or not once the DDS.DataReader is restarted. If this property is 0, the previous state will be deleted from the database. If it is 1, the DDS.DataReader will restore its previous state from the database content. Default: 1
    dds.data_reader.state.checkpoint_frequency This property controls how often the reader state is stored in the database. A value of N means to store the state once every N samples. A high frequency will provide better performance. However, if the reader is restarted it may receive some duplicate samples. These samples will be filtered by the middleware and they will not be propagated to the application.

    Default: 1

    dds.data_reader.state.persistence_service.request_depth This property indicates the number of most recent historical samples that the persisted DDS.DataReader wants to receive when it starts up.

    Default: 0



    Configuring Data Durability

    RTI Connext implements DDS.TRANSIENT_DURABILITY_QOS and DDS.PERSISTENT_DURABILITY_QOS durability using RTI Persistence Service, available for purchase as a separate RTI product.

    For more information on RTI Persistence Service, refer to the User's Manual, or the RTI Persistence Service API Reference HTML documentation.


    See also: DDSDurabilityQosModule