.. include:: /../getting_started/vars.rst

.. _section-regression-index:

***********
Regressions
***********
    
Regressions are documented in the release in which they were introduced, 
as well as the releases to which they still apply. For example, 
a regression introduced in 6.0.0 and not fixed until 6.1.0 will be 
listed in both the 6.0.0 and 6.0.1 sections below. 

.. note::

    This Migration Guide focuses only on the major, three-digit (LTS or feature)
    releases (6.0.1, 6.1.2, 7.2.0, etc.) in which a regression is introduced
    or fixed. Many regressions are also fixed in patch releases (such as
    6.0.1.30), which are not always mentioned in this Migration Guide. To find
    out if a regression is fixed in a patch release, contact RTI Support at
    support@rti.com or via the RTI Customer Portal (https://support.rti.com).

**7.2.0 Regressions** |br|
If you're upgrading to 7.2.0, then only 7.2.0 Regressions 
apply to you:
    
.. toctree::
    :maxdepth: 5
    
    regressions720

**7.1.0 Regressions** |br|
If you're upgrading to 7.1.0, then only 7.1.0 Regressions 
apply to you:
    
.. toctree::
    :maxdepth: 5
    
    regressions710

**7.0.0 Regressions** |br|
In 7.0.0, only 7.0.0 Regressions apply to you:
    
.. toctree::
    :maxdepth: 5
    
    regressions700

**6.1.1/6.1.2 Regressions** |br|
If you're upgrading to 6.1.1 or 6.1.2, then only 6.1.1/6.1.2 Regressions 
apply to you:
    
.. toctree::
    :maxdepth: 5
    
    regressions611
        
**6.1.0 Regressions** |br|
If you're upgrading to 6.1.0, then only 6.1.0 Regressions 
apply to you:

.. toctree::
    :maxdepth: 5

    regressions610

**6.0.1 Regressions** |br|
If you're upgrading to 6.0.1, then only 6.0.1 Regressions 
apply to you:

.. toctree::
    :maxdepth: 5

    regressions601
    
**6.0.0 Regressions** |br|
If you're upgrading to 6.0.0, then 6.0.0 Regressions 
apply to you:

.. toctree::
    :maxdepth: 5

    regressions