Understanding the Output

rtiddsspy’s output is formatted as a list of lines, where each line is independent and describes a sample received.

RTI Connext DDS Spy
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
rtiddsspy is listening for data, press CTRL+C to stop it.

16:12:49 New writer        from 192.168.43.223  : topic="rti/distlog" type="com::rti::dl::LogMessage"
16:12:49 New writer        from 192.168.43.223  : topic="rti/distlog/administration/state" type="com::rti::dl::admin::State"
16:12:49 New writer        from 192.168.43.223  : topic="rti/distlog/administration/command_response" type="com::rti::dl::admin::CommandResponse"
12:12:29 New writer        from 192.168.43.223  : topic="Circle" type="ShapeType"
16:12:49 New reader        from 192.168.43.223  : topic="rti/distlog/administration/command_request" type="com::rti::dl::admin::CommandRequest"
09:34:35 New data          from 192.168.43.223  : topic="Circle" type="ShapeType"
09:34:35 Modified instance from 192.168.43.223  : topic="Circle" type="ShapeType"

---- Statistics ----
Discovered 4 DataWriters and 1 DataReaders
Received samples (Data, Dispose, NoWriters):
    0, 0, 0         (Topic="rti/distlog"  Type="com::rti::dl::LogMessage")
    0, 0, 0         (Topic="rti/distlog/administration/state"  Type="com::rti::dl::admin::State")
    0, 0, 0         (Topic="rti/distlog/administration/command_response"  Type="com::rti::dl::admin::CommandResponse")
    2, 0, 0         (Topic="Circle"  Type="ShapeType")

The descriptions of output described in the following sections are the same as provided when you use the -hOutput option (described in Spy-Specific Options).

Default Output

In the default output, you can find the following information per line:

source_timestamp

Timestamp that appears in the SampleInfo associated with each sample. This timestamp represents the source-time when the sample was generated. It is printed in Coordinated Universal Time (UTC).

For example: 14:59:16.

A timestamp of xx:xx:xx indicates that the sample was not valid. For example, it could have been a dispose sample.

Info

Description of the received sample. The value distinguishes between discovery and user traffic.

For example: New writer.

  • “New writer”/”New reader”:

    Indicates discovery traffic. It means that rtiddsspy found a new writer/reader in another application.

  • “Updated writer”/”Updated reader”:

    Indicates discovery traffic.

    It means that the entity was explicitly updated by an application by changing any entity configuration parameter such as the partition, lifespan, or content-filtered topic expression.

  • “Deleted writer”/”Deleted reader”:

    Indicates discovery traffic.

    It means that the entity was explicitly deleted by an application or has otherwise lost liveliness.

  • “New data” indicates user traffic.

    For keyed data: Indicates a sample was received for a new instance that rtiddsspy has never seen before.

    For unkeyed data: Indicates a sample was received.

  • “Modified instance” indicates user traffic.

    Indicates a modified instance that rtiddsspy has seen before.

  • “Disposed instance” indicates user traffic.

    Indicates that an instance was disposed.

  • “No writers” indicates user traffic.

    Indicates that an instance has no more registered writers.

Source Locators

Display the locators of the writer that sent the sample, which may include an IPv4 or IPv6 address, or shared memory information.

These locators are obtained from the unicast_locators of the DataWriter or its DomainParticipant. Only the first available locator for each locator kind (IPv4, shared memory, or IPv6) is shown.

Note

The displayed locator may not be the actual address from which the sample was received.

If a locator is unavailable or cannot be parsed, it will be shown as (ipv4 N/A), (ipv6 N/A), or (shmem N/A).

By default, only an IPv4 locator is shown. To specify which locators to display, use the -srcLocators option.

For example: from shmem(55161), 192.168.43.223.

Topic

Topic name. For discovery messages, this refers to the Topic that has been discovered.

For example: topic="Circle".

Type

Type name. For discovery messages, this refers to the type of the Topic that has been discovered.

For example: type="ShapeType".

Statistics

rtiddsspy prints how many endpoints have been discovered and how many samples have been received, by Topic.

In the following example, rtiddsspy has discovered 4 DataWriters and 1 DataReader. rtiddsspy has received 2 samples from the Topic "Circle" and 0 samples from the rest of the Topics.

---- Statistics ----
Discovered 4 DataWriters and 1 DataReaders
Received samples (Data, Dispose, NoWriters):
    0, 0, 0         (Topic="rti/distlog"  Type="com::rti::dl::LogMessage")
    0, 0, 0         (Topic="rti/distlog/administration/state"  Type="com::rti::dl::admin::State")
    0, 0, 0         (Topic="rti/distlog/administration/command_response"  Type="com::rti::dl::admin::CommandResponse")
    2, 0, 0         (Topic="Circle"  Type="ShapeType")

Additional Output

The following fields do not appear by default, they need to be requested by command-line arguments:

Object GUID/Key

To enable this information, use -showHandle.

This field contains the 12-byte instance handle that appears in the SampleInfo associated with each sample.

Note that the information is only displayed for Topics that have a key. Note also that for simple key formats that can fit in 12 bytes, it will exactly match the key.

For example:

  • For discovery data: guid="0x0101888C,0x46C9EF71,0xFA7ED5AE:0x80004202".

  • For user data: key="c317c2ca.8e3f3618.ee0e16f1.86e8f9de".

Sample Identity

To enable this information, use -showSampleIdentity.

This field contains the original publication virtual GUID and the original publication virtual sequence number that appears in the SampleInfo associated with each sample.

For example: virtual_guid="0x0101888C,0x46C9EF71,0xFA7ED5AE:0x80004202" virtual_sn="(0, 6140280)".

Related Sample Identity

To enable this information, use -showSampleIdentity.

This field contains the related original publication virtual GUID and the related original publication virtual sequence number that appears in the SampleInfo associated with each sample.

For example: related_virtual_guid="0x0101888C,0x46C9EF71,0xFA7ED5AE:0x80004202" related_virtual_sn="(0, 6140280)".

Flags

To enable this information, use -showSampleFlags.

This field shows the active flags associated with each sample.

For example: flags="LR".

The possible flags are:

  • R: the sample has been redelivered by RTI Queuing Service.

  • I: a response sample is not the last sample for a given request. This bit is usually set by Connext Repliers sending multiple responses for a request.

  • P: a sample must be broadcast by one RTI Queuing Service replica to other replicas.

  • L: a response sample is the last sample in a SharedReaderQueue for a QueueConsumer DataReader.

Entity Name

To enable this information, use -showEntityName.

This field contains the name of the entity discovered or the name of the DataWriter sending data. For example: name="roleName:testDataWriter".

By default, the entity name is printed each time an entity is discovered. For example: 16:12:49 New writer from 192.168.43.223 : topic="rti/distlog" type="com::rti::dl::LogMessage"

By default, the DataWriter name is not printed each time it sends data. For example: 09:34:35 New data from 192.168.43.223 : topic="Circle" type="ShapeType"

Partition

To enable this information, use -showPartition.

This field contains the partition of the entity discovered or the partition of the DataWriter sending data.

For example: partition="A,B,C".

For information on partitions, see PARTITION QosPolicy, in the RTI Connext DDS Core Libraries User’s Manual.

Sample

There are two options to display the sample:

  • -printSample PLAIN: This is the default option. It pretty-prints sample information for best readability.

    12:35:24 New data          from 192.168.43.223  : topic="Circle" type="ShapeType"
color: "BLUE"
x: 53
y: 190
shapesize: 30
fillKind: SOLID_FILL
angle: 0

  • -printSample COMPACT: This option prints sample information in a single line using a JSON format.

    12:38:15 New data          from 192.168.43.223  : topic="Circle" type="ShapeType" sample={"color":"BLUE","x":202,"y":175,"shapesize":30,"fillKind":"SOLID_FILL","angle":0}