RTI Connext .Net APIs  Version 5.0.0
DDS::DiscoveryQosPolicy Class Reference

Configures the mechanism used by the middleware to automatically discover and connect with new remote applications. More...

#include <managed_infrastructure.h>

Static Public Member Functions

static System::String^ get_discovery_qos_policy_name ()
 Stringified human-readable name for DDS::DiscoveryQosPolicy.
 

Public Attributes

StringSeqenabled_transports
 The transports available for use by the Discovery mechanism.
 
StringSeqinitial_peers
 Determines the initial list of peers that will be contacted by the Discovery mechanism to send announcements about the presence of this participant.
 
StringSeqmulticast_receive_addresses
 Specifies the multicast group addresses on which discovery-related meta-traffic can be received by the DomainParticipant.
 
System::Int32 metatraffic_transport_priority
 The transport priority to use for the Discovery meta-traffic.
 

Properties

System::Boolean accept_unknown_peers [get, set]
 Whether to accept a new participant that is not in the initial peers list.
 

Detailed Description

Configures the mechanism used by the middleware to automatically discover and connect with new remote applications.

Entity:
DDS::DomainParticipant
Properties:
RxO = N/A
Changeable = NO

Usage

This QoS policy identifies where on the network this application can potentially discover other applications with which to communicate.

The middleware will periodically send network packets to these locations, announcing itself to any remote applications that may be present, and will listen for announcements from those applications.

This QoS policy is an extension to the DDS standard.

See Also
NDDS_DISCOVERY_PEERS
DDS::DiscoveryConfigQosPolicy

Member Data Documentation

StringSeq ^ DDS::DiscoveryQosPolicy::enabled_transports

The transports available for use by the Discovery mechanism.

Only these transports can be used by the discovery mechanism to send meta-traffic via the builtin endpoints (built-in DDS::DataReader and DDS::DataWriter).

Also determines the unicast addresses on which the Discovery mechanism will listen for meta-traffic. These along with the domain_id and participant_id determine the unicast locators on which the Discovery mechanism can receive meta-data.

Alias names for the builtin transports are defined in TRANSPORT_BUILTIN.

[default] Empty sequence. All the transports available to the DomainParticipant are available for use by the Discovery mechanism.

[range] Sequence of non-null,non-empty strings.

StringSeq ^ DDS::DiscoveryQosPolicy::initial_peers

Determines the initial list of peers that will be contacted by the Discovery mechanism to send announcements about the presence of this participant.

If there is a remote peer DDS::DomainParticipant such as is described in this list, it will become aware of this participant and will engage in the Discovery protocol to exchange meta-data with this participant.

Each element of this list must be a peer descriptor in the proper format (see Peer Descriptor Format).

[default] See NDDS_DISCOVERY_PEERS

[range] Sequence of arbitrary length.

See Also
Peer Descriptor Format
DDS::DomainParticipant::add_peer()
StringSeq ^ DDS::DiscoveryQosPolicy::multicast_receive_addresses

Specifies the multicast group addresses on which discovery-related meta-traffic can be received by the DomainParticipant.

The multicast group addresses on which the Discovery mechanism will listen for meta-traffic.

Each element of this list must be a valid multicast address (IPv4 or IPv6) in the proper format (see Address Format).

The domain_id determines the multicast port on which the Discovery mechanism can receive meta-data.

If NDDS_DISCOVERY_PEERS does not contain a multicast address, then the string sequence DDS::DiscoveryQosPolicy::multicast_receive_addresses is cleared and the RTI discovery process will not listen for discovery messages via multicast.

If NDDS_DISCOVERY_PEERS contains one or more multicast addresses, the addresses will be stored in DDS::DiscoveryQosPolicy::multicast_receive_addresses, starting at element 0. They will be stored in the order they appear NDDS_DISCOVERY_PEERS.

Note: Currently, RTI Connext will only listen for discovery traffic on the first multicast address (element 0) in DDS::DiscoveryQosPolicy::multicast_receive_addresses.

[default] See NDDS_DISCOVERY_PEERS

[range] Sequence of length [0,1], whose elements are multicast addresses. Currently only the first multicast address (if any) is used. The rest are ignored.

See Also
Address Format
System::Int32 DDS::DiscoveryQosPolicy::metatraffic_transport_priority

The transport priority to use for the Discovery meta-traffic.

The discovery metatraffic will be sent by the built-in DDS::DataWriter using this transport priority.

[default] 0

Property Documentation

System:: Boolean DDS::DiscoveryQosPolicy::accept_unknown_peers
getset

Whether to accept a new participant that is not in the initial peers list.

If false, the participant will only communicate with those in the initial peers list and those added via DDS::DomainParticipant::add_peer().

If true, the participant will also communicate with all discovered remote participants.

Note: If accept_unknown_peers is false and shared memory is disabled, applications on the same node will not communicate if only 'localhost' is specified in the peers list. If shared memory is disabled or 'shmem://' is not specified in the peers list, to communicate with other applications on the same node through the loopback interface, you must put the actual node address or hostname in NDDS_DISCOVERY_PEERS.

[default] true


RTI Connext .Net APIs Version 5.0.0 Copyright © Thu Aug 30 2012 Real-Time Innovations, Inc