RTI Connext .Net APIs  Version 5.0.0
DDS::TransportMulticastQosPolicy Class Reference

Specifies the multicast address on which a DDS::DataReader wants to receive its data. It can also specify a port number as well as a subset of the available (at the DDS::DomainParticipant level) transports with which to receive the multicast data. More...

#include <managed_infrastructure.h>

Static Public Member Functions

static System::String^ get_transportmulticast_qos_policy_name ()
 Stringified human-readable name for DDS::TransportMulticastQosPolicy.
 

Public Attributes

TransportMulticastSettingsSeqvalue
 A sequence of multicast communications settings.
 
TransportMulticastQosPolicyKind kind
 A value that specifies a way to determine how to obtain the multicast address.
 

Detailed Description

Specifies the multicast address on which a DDS::DataReader wants to receive its data. It can also specify a port number as well as a subset of the available (at the DDS::DomainParticipant level) transports with which to receive the multicast data.

By default, a DDS::DataWriter will send individually addressed packets for each DDS::DataReader that subscribes to the topic of the DataWriter – this is known as unicast delivery. Thus, as many copies of the data will be sent over the network as there are DataReaders for the data. The network bandwidth used by a DataWriter will thus increase linearly with the number of DataReaders.

Multicast addressing (on UDP/IP transports) allows multiple DataReaders to receive the same network packet. By using multicast, a DDS::DataWriter can send a single network packet that is received by all subscribing applications. Thus the network bandwidth usage will be constant, independent of the number of DataReaders.

Coordinating the multicast address specified by DataReaders can help optimize network bandwidth usage in systems where there are multiple DataReaders for the same DDS::Topic.

Entity:
DDS::DataReader
Properties:
RxO = N/A
Changeable = NO

Member Data Documentation

TransportMulticastSettingsSeq ^ DDS::TransportMulticastQosPolicy::value

A sequence of multicast communications settings.

An empty sequence means that multicast is not used by the entity.

The RTPS wire protocol currently limits the maximum number of multicast locators to four.

[default] Empty sequence.

TransportMulticastQosPolicyKind DDS::TransportMulticastQosPolicy::kind

A value that specifies a way to determine how to obtain the multicast address.

This field can have two values.

  • If it is set to ::DDS::TransportMulticastQosPolicyKind::AUTOMATIC_TRANSPORT_MULTICAST_QOS and the DDS::TransportMulticastQosPolicy::value does not have any elements, then multicast will not be used.
  • If it is set to ::DDS::TransportMulticastQosPolicyKind::AUTOMATIC_TRANSPORT_MULTICAST_QOS and the DDS::TransportMulticastQosPolicy::value has at least one element with a valid address, then that address will be used.
  • If it is set to ::DDS::TransportMulticastQosPolicyKind::UNICAST_ONLY_TRANSPORT_MULTICAST_QOS, then multicast will not be used.

[default] ::DDS::TransportMulticastQosPolicyKind::AUTOMATIC_TRANSPORT_MULTICAST_QOS


RTI Connext .Net APIs Version 5.0.0 Copyright © Thu Aug 30 2012 Real-Time Innovations, Inc