RTI Connext Traditional C++ API  Version 5.2.0
 All Classes Functions Variables Typedefs Enumerations Enumerator Groups Pages
DDS_ReceiverPoolQosPolicy Struct Reference

Configures threads used by RTI Connext to receive and process data from transports (for example, UDP sockets). More...

Public Attributes

struct DDS_ThreadSettings_t thread
 Receiver pool thread(s).
 
DDS_Long buffer_size
 The receive buffer size.
 
DDS_Long buffer_alignment
 The receive buffer alignment.
 

Detailed Description

Configures threads used by RTI Connext to receive and process data from transports (for example, UDP sockets).

This QoS policy is an extension to the DDS standard.

Entity:
DDSDomainParticipant
Properties:
RxO = N/A
Changeable = NO
See Also
Controlling CPU Core Affinity for RTI Threads

Usage

This QoS policy sets the thread properties such as priority level and stack size for the threads used by the middleware to receive and process data from transports.

RTI uses a separate receive thread per port per transport plug-in. To force RTI Connext to use a separate thread to process the data for a DDSDataReader, set a unique port for the DDS_TransportUnicastQosPolicy or DDS_TransportMulticastQosPolicy for the DDSDataReader.

This QoS policy also sets the size of the buffer used to store packets received from a transport. This buffer size will limit the largest single packet of data that a DDSDomainParticipant will accept from a transport. Users will often set this size to the largest packet that any of the transports used by their application will deliver. For many applications, the value 65,536 (64 K) is a good choice; this value is the largest packet that can be sent/received via UDP.

Member Data Documentation

struct DDS_ThreadSettings_t DDS_ReceiverPoolQosPolicy::thread

Receiver pool thread(s).

There is at least one receive thread, possibly more.

[default] priority above normal.
The actual value depends on your architecture:

For Windows: 2
For Linux: OS default priority
For a complete list of platform specific values, please refer to Platform Notes.

[default] The actual value depends on your architecture:

For Windows: OS default stack size
For Linux: OS default stack size
For a complete list of platform specific values, please refer to Platform Notes.

[default] mask DDS_THREAD_SETTINGS_FLOATING_POINT | DDS_THREAD_SETTINGS_STDIO

DDS_Long DDS_ReceiverPoolQosPolicy::buffer_size

The receive buffer size.

The receive buffer is used by the receive thread to store the raw data that arrives over the transport.

In many applications, users will change the configuration of the built-in transport NDDS_Transport_Property_t::message_size_max to increase the size of the largest data packet that can be sent or received through the transport. Typically, users will change the UDPv4 transport plugin's NDDS_Transport_Property_t::message_size_max to 65536 (64 K), which is the largest packet that can be sent/received via UDP.

If you change buffer_size from its default value of LENGTH_AUTO, it should be set to be the same value as the maximum NDDS_Transport_Property_t::message_size_max across all of the transports being used that are not doing zero-copy (described below).

If your application only uses transports that support zero-copy, buffer_size does not need to be greater than NDDS_Transport_Property_t::message_size_max.

Transports that support zero-copy do not copy their data into the buffer provided by the receive thread. Instead, they provide the receive thread data in a buffer allocated by the transport itself. The built-in transports that support zero-copy are the SHMEM transport, and the UDPv4 transport on VxWorks platforms.

buffer_size may be deprecated in the future.

[default] DDS_LENGTH_AUTO

[range] [1, 1 GB] or DDS_LENGTH_AUTO

DDS_Long DDS_ReceiverPoolQosPolicy::buffer_alignment

The receive buffer alignment.

Most users will not need to change this alignment.

[default] 16

[range] [1,1024] Value must be a power of 2.


RTI Connext Traditional C++ API Version 5.2.0 Copyright © Sun Jun 21 2015 Real-Time Innovations, Inc