|
RTI Connext .Net APIs
Version 5.3.0
|
<<extension>> Specifies the wire protocol related attributes for the DDS::DomainParticipant. More...
Classes | |
| struct | DDS::RtpsWellKnownPorts_t |
| RTPS well-known port mapping configuration. More... | |
| struct | DDS::WireProtocolQosPolicy |
| Specifies the wire-protocol-related attributes for the DDS::DomainParticipant. More... | |
Enumerations | |
| enum | DDS::RtpsReservedPortKind : UINT32 { DDS::RtpsReservedPortKind::DDS_RTPS_RESERVED_PORT_BUILTIN_UNICAST = 0x0001 << 0, DDS::RtpsReservedPortKind::DDS_RTPS_RESERVED_PORT_BUILTIN_MULTICAST = 0x0001 << 1, DDS::RtpsReservedPortKind::DDS_RTPS_RESERVED_PORT_USER_UNICAST = 0x0001 << 2, DDS::RtpsReservedPortKind::DDS_RTPS_RESERVED_PORT_USER_MULTICAST = 0x0001 << 3, DDS::RtpsReservedPortKind::RTPS_RESERVED_PORT_MASK_DEFAULT, DDS::RtpsReservedPortKind::RTPS_RESERVED_PORT_MASK_NONE, DDS::RtpsReservedPortKind::RTPS_RESERVED_PORT_MASK_ALL } |
| RTPS reserved port kind, used to identify the types of ports that can be reserved on domain participant enable. More... | |
| enum | DDS::WireProtocolQosPolicyAutoKind : UINT32 { DDS::WireProtocolQosPolicyAutoKind::RTPS_AUTO_ID_FROM_IP = 0, DDS::WireProtocolQosPolicyAutoKind::RTPS_AUTO_ID_FROM_MAC = 1, DDS::WireProtocolQosPolicyAutoKind::RTPS_AUTO_ID_FROM_UUID = 2 } |
| Mechanism to automatically calculate the GUID prefix. More... | |
Functions | |
| static System::String ^ | DDS::WireProtocolQosPolicy::get_wireprotocol_qos_policy_name () |
| Stringified human-readable name for DDS::WireProtocolQosPolicy. More... | |
Properties | |
| static RtpsWellKnownPorts_t | DDS::RtpsWellKnownPorts_t::RTI_BACKWARDS_COMPATIBLE_RTPS_WELL_KNOWN_PORTS [get] |
| Assign to use well-known port mappings which are compatible with previous versions of the RTI Connext middleware. More... | |
| static RtpsWellKnownPorts_t | DDS::RtpsWellKnownPorts_t::INTEROPERABLE_RTPS_WELL_KNOWN_PORTS [get] |
| Assign to use well-known port mappings which are compliant with OMG's DDS Interoperability Wire Protocol. More... | |
| static System::UInt32 | DDS::WireProtocolQosPolicy::RTPS_AUTO_ID [get] |
| Indicates that RTI Connext should choose an appropriate host, app, instance or object ID automatically. More... | |
<<extension>> Specifies the wire protocol related attributes for the DDS::DomainParticipant.
|
strong |
RTPS reserved port kind, used to identify the types of ports that can be reserved on domain participant enable.
| Enumerator | |
|---|---|
| DDS_RTPS_RESERVED_PORT_BUILTIN_UNICAST | Select the metatraffic unicast port. |
| DDS_RTPS_RESERVED_PORT_BUILTIN_MULTICAST | Select the metatraffic multicast port. |
| DDS_RTPS_RESERVED_PORT_USER_UNICAST | Select the usertraffic unicast port. |
| DDS_RTPS_RESERVED_PORT_USER_MULTICAST | Select the usertraffic multicast port. |
| RTPS_RESERVED_PORT_MASK_DEFAULT | The default value of DDS::WireProtocolQosPolicy::rtps_reserved_port_mask. Most of the ports that may be needed by DDS will be reserved by the transport when the participant is enabled. With this value set, failure to allocate a port that is computed based on the DDS::RtpsWellKnownPorts_t will be detected at this time and the enable operation will fail. This setting will avoid reserving the usertraffic multicast port, which is not actually used unless there are DataReaders that enable multicast but fail to specify a port. Automatic participant ID selection will be based on finding a participant index with both the discovery (metatraffic) unicast port and usertraffic unicast port available. |
| RTPS_RESERVED_PORT_MASK_NONE | No bits are set. None of the ports that are needed by DDS will be allocated until they are specifically required. With this value set, automatic participant Id selection will be based on selecting a port for discovery (metatraffic) unicast traffic on a single transport. |
| RTPS_RESERVED_PORT_MASK_ALL | All bits are set. All of the ports that may be needed by DDS will be reserved when the participant is enabled. With this value set, failure to allocate a port that is computed based on the DDS::RtpsWellKnownPorts_t will be detected at this time, and the enable operation will fail. Note that this will also reserve the usertraffic multicast port which is not actually used unless there are DataReaders that enable multicast but fail to specify a port. To avoid unnecesary resource usage for these ports, use RTPS_RESERVED_PORT_MASK_DEFAULT. Automatic participant ID selection will be based on finding a participant index with both the discovery (metatraffic) unicast port and usertraffic unicast port available. |
|
strong |
Mechanism to automatically calculate the GUID prefix.
| Enumerator | |
|---|---|
| RTPS_AUTO_ID_FROM_IP | Select the IPv4 based algorithm. |
| RTPS_AUTO_ID_FROM_MAC | Select the MAC based algorithm. Note to Solaris Users: To use DDS_RTPS_AUTO_ID_FROM_MAC, you must run the RTI Connext application while logged in as 'root.' |
| RTPS_AUTO_ID_FROM_UUID | Select the UUID based algorithm. This method of generating the GUID prefix does not require having a network interface and is friendly to IP mobility scenarios in which a RTI Connext application may start in a node that does not have physical network interface enabled. |
|
inlinestatic |
Stringified human-readable name for DDS::WireProtocolQosPolicy.
|
staticget |
Assign to use well-known port mappings which are compatible with previous versions of the RTI Connext middleware.
Assign DDS::WireProtocolQosPolicy::rtps_well_known_ports to this value to remain compatible with previous versions of the RTI Connext middleware that used fixed port mappings.
The following are the rtps_well_known_ports values for DDS::RtpsWellKnownPorts_t::RTI_BACKWARDS_COMPATIBLE_RTPS_WELL_KNOWN_PORTS:
port_base = 7400
domain_id_gain = 10
participant_id_gain = 1000
builtin_multicast_port_offset = 2
builtin_unicast_port_offset = 0
user_multicast_port_offset = 1
user_unicast_port_offset = 3
These settings are not compliant with OMG's DDS Interoperability Wire Protocol. To comply with the specification, please use DDS::RtpsWellKnownPorts_t::INTEROPERABLE_RTPS_WELL_KNOWN_PORTS.
|
staticget |
Assign to use well-known port mappings which are compliant with OMG's DDS Interoperability Wire Protocol.
Assign DDS::WireProtocolQosPolicy::rtps_well_known_ports to this value to use well-known port mappings which are compliant with OMG's DDS Interoperability Wire Protocol.
The following are the rtps_well_known_ports values for DDS::RtpsWellKnownPorts_t::INTEROPERABLE_RTPS_WELL_KNOWN_PORTS:
port_base = 7400
domain_id_gain = 250
participant_id_gain = 2
builtin_multicast_port_offset = 0
builtin_unicast_port_offset = 10
user_multicast_port_offset = 1
user_unicast_port_offset = 11
Assuming a maximum port number of 65535 (UDPv4), the above settings enable the use of about 230 domains with up to 120 Participants per node per domain.
These settings are not backwards compatible with previous versions of the RTI Connext middleware that used fixed port mappings. For backwards compability, please use DDS::RtpsWellKnownPorts_t::RTI_BACKWARDS_COMPATIBLE_RTPS_WELL_KNOWN_PORTS.
|
staticget |
Indicates that RTI Connext should choose an appropriate host, app, instance or object ID automatically.
If this special value is assigned to DDS::WireProtocolQosPolicy::rtps_host_id, DDS::WireProtocolQosPolicy::rtps_app_id, DDS::WireProtocolQosPolicy::rtps_instance_id, DDS::DataWriterProtocolQosPolicy::rtps_object_id or DDS::DataReaderProtocolQosPolicy::rtps_object_id RTI Connext will assign the ID automatically.
The actual ID value is chosen when the QoS is set: the QoS returned from DDS::DomainParticipant::get_qos, DDS::DataWriter::get_qos or DDS::DataReader::get_qos will never have this value.
RTI Connext .Net APIs Version 5.3.0
Copyright © Sun Jun 25 2017
Real-Time Innovations, Inc