DDS_DestinationOrderQosPolicy Struct Reference

Controls how the middleware will deal with data sent by multiple DDS_DataWriter entities for the same instance of data (i.e., same DDS_Topic and key). More...

Data Fields
DDS_DestinationOrderQosPolicyKind	kind
	Specifies the desired kind of destination order.
DDS_DestinationOrderQosPolicyScopeKind	scope
	Specifies the desired scope of the source destination order.
struct DDS_Duration_t	source_timestamp_tolerance
	<<extension>> Allowed tolerance between source timestamps of consecutive samples.

Detailed Description

Controls how the middleware will deal with data sent by multiple DDS_DataWriter entities for the same instance of data (i.e., same DDS_Topic and key).

Entity:

DDS_Topic, DDS_DataReader, DDS_DataWriter

Status:

DDS_OFFERED_INCOMPATIBLE_QOS_STATUS, DDS_REQUESTED_INCOMPATIBLE_QOS_STATUS

Properties:

RxO = YES
Changeable = UNTIL ENABLE

Usage

When multiple DataWriters send data for the same topic, the order in which data from different DataWriters are received by the applications of different DataReaders may be different. So different DataReaders may not receive the same "last" value when DataWriters stop sending data.

This QoS policy controls how each subscriber resolves the final value of a data instance that is written by multiple DDS_DataWriter entities (which may be associated with different DDS_Publisher entities) running on different nodes.

The default setting, DDS_BY_RECEPTION_TIMESTAMP_DESTINATIONORDER_QOS, indicates that (assuming the OWNERSHIP_STRENGTH policy allows it) the latest received value for the instance should be the one whose value is kept. That is, data will be delivered by a DDS_DataReader in the order in which it was received (which may lead to inconsistent final values).

The setting DDS_BY_SOURCE_TIMESTAMP_DESTINATIONORDER_QOS indicates that (assuming the OWNERSHIP_STRENGTH allows it, within each instance) the source_timestamp of the change shall be used to determine the most recent information. That is, data will be delivered by a DDS_DataReader in the order in which it was sent. If data arrives on the network with a source timestamp that is later than the source timestamp of the last data delivered, the new data will be dropped. This 'by source timestamp' ordering therefore works best when system clocks are relatively synchronized among writing machines.

When using DDS_BY_SOURCE_TIMESTAMP_DESTINATIONORDER_QOS, not all data sent by multiple DDS_DataWriter entities may be delivered to a DDS_DataReader and not all DataReaders will see the same data sent by DataWriters. However, all DataReaders will see the same "final" data when DataWriters "stop" sending data. This is the only setting that, in the case of concurrently publishing DDS_DataWriter entities updating the same instance of a shared-ownership topic, ensures all subscribers will end up with the same final value for the instance.

This QoS can be used to create systems that have the property of "eventual consistency." Thus intermediate states across multiple applications may be inconsistent, but when DataWriters stop sending changes to the same topic, all applications will end up having the same state.

Compatibility

The value offered is considered compatible with the value requested if and only if the inequality offered kind >= requested kind evaluates to 'TRUE'. For the purposes of this inequality, the values of DDS_DestinationOrderQosPolicy::kind are considered ordered such that DDS_BY_RECEPTION_TIMESTAMP_DESTINATIONORDER_QOS < DDS_BY_SOURCE_TIMESTAMP_DESTINATIONORDER_QOS

Field Documentation

DDS_DestinationOrderQosPolicyKind DDS_DestinationOrderQosPolicy::kind

Specifies the desired kind of destination order.

[default] DDS_BY_RECEPTION_TIMESTAMP_DESTINATIONORDER_QOS,

DDS_DestinationOrderQosPolicyScopeKind DDS_DestinationOrderQosPolicy::scope

Specifies the desired scope of the source destination order.

Indicates if tolerance check and the current sample's timestamp is computed based on instance or topic basis.
[default] DDS_INSTANCE_SCOPE_DESTINATIONORDER_QOS

struct DDS_Duration_t DDS_DestinationOrderQosPolicy::source_timestamp_tolerance

<<extension>> Allowed tolerance between source timestamps of consecutive samples.

When a DDS_DataWriter sets DDS_DestinationOrderQosPolicyKind to DDS_BY_SOURCE_TIMESTAMP_DESTINATIONORDER_QOS, when writing a sample, its timestamp must not be less than the timestamp of the previously written sample. However, if it is less than the timestamp of the previously written sample but the difference is less than this tolerance, the sample will use the previously written sample's timestamp as its timestamp. Otherwise, if the difference is greater than this tolerance, the write will fail.

When a DDS_DataReader sets DDS_DestinationOrderQosPolicyKind to DDS_BY_SOURCE_TIMESTAMP_DESTINATIONORDER_QOS, the DDS_DataReader will accept a sample only if the source timestamp is no farther in the future from the reception timestamp than this tolerance. Otherwise, the sample is rejected.

[default] 100 milliseconds for DDS_DataWriter, 30 seconds for DDS_DataReader