RTI Connext Traditional C++ API  Version 5.3.1
 All Classes Functions Variables Typedefs Enumerations Enumerator Groups Pages
DDS_DiscoveryQosPolicy Struct Reference

<<extension>> Configures the mechanism used by the middleware to automatically discover and connect with new remote applications. More...

Public Attributes

struct DDS_StringSeq enabled_transports
 The transports available for use by the Discovery mechanism.
 
struct DDS_StringSeq initial_peers
 Determines the initial list of peers that will be contacted by the Discovery mechanism to send announcements about the presence of this participant.
 
struct DDS_StringSeq multicast_receive_addresses
 Specifies the multicast group addresses on which discovery-related meta-traffic can be received by the DomainParticipant.
 
DDS_Long metatraffic_transport_priority
 The transport priority to use for the Discovery meta-traffic.
 
DDS_Boolean accept_unknown_peers
 Whether to accept a new participant that is not in the initial peers list.
 
DDS_Boolean enable_endpoint_discovery
 Whether to automatically enable endpoint discovery for all the remote participants.
 

Detailed Description

<<extension>> Configures the mechanism used by the middleware to automatically discover and connect with new remote applications.

Entity:
DDSDomainParticipant
Properties:
RxO = N/A
Changeable = NO

Usage

This QoS policy identifies where on the network this application can potentially discover other applications with which to communicate.

The middleware will periodically send network packets to these locations, announcing itself to any remote applications that may be present, and will listen for announcements from those applications.

This QoS policy is an extension to the DDS standard.

See Also
NDDS_DISCOVERY_PEERS
DDS_DiscoveryConfigQosPolicy

Member Data Documentation

struct DDS_StringSeq DDS_DiscoveryQosPolicy::enabled_transports

The transports available for use by the Discovery mechanism.

Only these transports can be used by the discovery mechanism to send meta-traffic via the builtin endpoints (built-in DDSDataReader and DDSDataWriter).

Also determines the unicast addresses on which the Discovery mechanism will listen for meta-traffic. These along with the domain_id and participant_id determine the unicast locators on which the Discovery mechanism can receive meta-data.

The memory for the strings in this sequence is managed according to the conventions described in Conventions. In particular, be careful to avoid a situation in which RTI Connext allocates a string on your behalf and you then reuse that string in such a way that RTI Connext believes it to have more memory allocated to it than it actually does.

Alias names for the builtin transports are defined in TRANSPORT_BUILTIN.

[default] Empty sequence. All the transports available to the DomainParticipant are available for use by the Discovery mechanism.

[range] Sequence of non-null,non-empty strings.

struct DDS_StringSeq DDS_DiscoveryQosPolicy::initial_peers

Determines the initial list of peers that will be contacted by the Discovery mechanism to send announcements about the presence of this participant.

As part of the participant discovery phase, the DDSDomainParticipant will announce itself to the domain by sending participant DATA messages. The initial_peers specifies the initial list of peers that will be contacted. A remote DDSDomainParticipant is discovered by receiving participant announcements from a remote peer. When the new remote DDSDomainParticipant has been added to the participant's database, the endpoint discovery phase commences and information about the DataWriters and DataReaders is exchanged.

Each element of this list must be a peer descriptor in the proper format (see Peer Descriptor Format).

[default] builtin.udpv4://239.255.0.1, builtin.udpv4://127.0.0.1, builtin.shmem:// (See also NDDS_DISCOVERY_PEERS)

[range] Sequence of arbitrary length.

See Also
Peer Descriptor Format
DDSDomainParticipant::add_peer()
struct DDS_StringSeq DDS_DiscoveryQosPolicy::multicast_receive_addresses

Specifies the multicast group addresses on which discovery-related meta-traffic can be received by the DomainParticipant.

The multicast group addresses on which the Discovery mechanism will listen for meta-traffic.

Each element of this list must be a valid multicast address (IPv4 or IPv6) in the proper format (see Address Format).

The domain_id determines the multicast port on which the Discovery mechanism can receive meta-data.

If NDDS_DISCOVERY_PEERS does not contain a multicast address, then the string sequence DDS_DiscoveryQosPolicy::multicast_receive_addresses is cleared and the RTI discovery process will not listen for discovery messages via multicast.

If NDDS_DISCOVERY_PEERS contains one or more multicast addresses, the addresses will be stored in DDS_DiscoveryQosPolicy::multicast_receive_addresses, starting at element 0. They will be stored in the order they appear NDDS_DISCOVERY_PEERS.

Note: Currently, RTI Connext will only listen for discovery traffic on the first multicast address (element 0) in DDS_DiscoveryQosPolicy::multicast_receive_addresses.

[default] builtin.udpv4://239.255.0.1 (See also NDDS_DISCOVERY_PEERS)

[range] Sequence of length [0,1], whose elements are multicast addresses. Currently only the first multicast address (if any) is used. The rest are ignored.

See Also
Address Format
DDS_Long DDS_DiscoveryQosPolicy::metatraffic_transport_priority

The transport priority to use for the Discovery meta-traffic.

The discovery metatraffic will be sent by the built-in DDSDataWriter using this transport priority.

[default] 0

DDS_Boolean DDS_DiscoveryQosPolicy::accept_unknown_peers

Whether to accept a new participant that is not in the initial peers list.

If DDS_BOOLEAN_FALSE, the participant will only communicate with those in the initial peers list and those added via DDSDomainParticipant::add_peer().

If DDS_BOOLEAN_TRUE, the participant will also communicate with all discovered remote participants.

Note: If accept_unknown_peers is DDS_BOOLEAN_FALSE and shared memory is disabled, applications on the same node will not communicate if only 'localhost' is specified in the peers list. If shared memory is disabled or 'shmem://' is not specified in the peers list, to communicate with other applications on the same node through the loopback interface, you must put the actual node address or hostname in NDDS_DISCOVERY_PEERS.

[default] DDS_BOOLEAN_TRUE

DDS_Boolean DDS_DiscoveryQosPolicy::enable_endpoint_discovery

Whether to automatically enable endpoint discovery for all the remote participants.

If DDS_BOOLEAN_TRUE, endpoint discovery will automatically occur for every discovered remote participant.

If DDS_BOOLEAN_FALSE, endpoint discovery will be initially disabled and manual activation is required for each discovered participant by calling DDSDomainParticipant::resume_endpoint_discovery.

[default] DDS_BOOLEAN_TRUE


RTI Connext Traditional C++ API Version 5.3.1 Copyright © Mon Feb 19 2018 Real-Time Innovations, Inc