RTI Connext Java API
Version 5.3.1
|
<<extension>> The status of a reader's internal protocol related metrics, like the number of samples received, filtered, rejected; and status of wire protocol traffic. More...
Inherits Status.
Public Attributes | |
long | received_sample_count |
The number of samples received by a DataReader. | |
long | received_sample_count_change |
The incremental change in the number of samples received from a DataReader since the last time the status was read. | |
long | received_sample_bytes |
The number of bytes received by a DataReader. | |
long | received_sample_bytes_change |
The incremental change in the number of bytes received from a DataReader since the last time the status was read. | |
long | duplicate_sample_count |
The number of samples from a remote DataWriter received, not for the first time, by a local DataReader. | |
long | duplicate_sample_count_change |
The incremental change in the number of samples from a remote DataWriter received, not for the first time, by a local DataReader since the last time the status was read. | |
long | duplicate_sample_bytes |
The number of bytes of samples from a remote DataWriter received, not for the first time, by a local DataReader. | |
long | duplicate_sample_bytes_change |
The incremental change in the number of bytes of samples from a remote DataWriter received, not for the first time, by a local DataReader since the last time the status was read. | |
long | filtered_sample_count |
The number of user samples filtered by the local DataReader due to Content-Filtered Topics or Time-Based Filter. | |
long | filtered_sample_count_change |
The incremental change in the number of user samples filtered by the local DataReader due to Content-Filtered Topics or Time-Based Filter since the last time the status was read. | |
long | filtered_sample_bytes |
The number of bytes of user samples filtered by the local DataReader due to Content-Filtered Topics or Time-Based Filter. | |
long | filtered_sample_bytes_change |
The incremental change in the number of bytes of user samples filtered by the local DataReader due to Content-Filtered Topics or Time-Based Filter since the last time the status was read. | |
long | received_heartbeat_count |
The number of Heartbeats from a remote DataWriter received by a local DataReader. | |
long | received_heartbeat_count_change |
The incremental change in the number of Heartbeats from a remote DataWriter received by a local DataReader since the last time the status was read. | |
long | received_heartbeat_bytes |
The number of bytes of Heartbeats from a remote DataWriter received by a local DataReader. | |
long | received_heartbeat_bytes_change |
The incremental change in the number of bytes of Heartbeats from a remote DataWriter received by a local DataReader since the last time the status was read. | |
long | sent_ack_count |
The number of ACKs sent from a local DataReader to a matching remote DataWriter. | |
long | sent_ack_count_change |
The incremental change in the number of ACKs sent from a local DataReader to a matching remote DataWriter since the last time the status was read. | |
long | sent_ack_bytes |
The number of bytes of ACKs sent from a local DataReader to a matching remote DataWriter. | |
long | sent_ack_bytes_change |
The incremental change in the number of bytes of ACKs sent from a local DataReader to a matching remote DataWriter since the last time the status was read. | |
long | sent_nack_count |
The number of NACKs sent from a local DataReader to a matching remote DataWriter. | |
long | sent_nack_count_change |
The incremental change in the number of NACKs sent from a local DataReader to a matching remote DataWriter since the last time the status was read. | |
long | sent_nack_bytes |
The number of bytes of NACKs sent from a local DataReader to a matching remote DataWriter. | |
long | sent_nack_bytes_change |
The incremental change in the number of bytes of NACKs sent from a local DataReader to a matching remote DataWriter since the last time the status was read. | |
long | received_gap_count |
The number of GAPs received from remote DataWriter to this DataReader. | |
long | received_gap_count_change |
The incremental change in the number of GAPs received from remote DataWriter to this DataReader since the last time the status was read. | |
long | received_gap_bytes |
The number of bytes of GAPs received from remote DataWriter to this DataReader. | |
long | received_gap_bytes_change |
The incremental change in the number of bytes of GAPs received from remote DataWriter to this DataReader since the last time the status was read. | |
long | rejected_sample_count |
The number of times a sample is rejected due to exceptions in the receive path. | |
long | rejected_sample_count_change |
The incremental change in the number of times a sample is rejected due to exceptions in the receive path since the last time the status was read. | |
SequenceNumber_t | first_available_sample_sequence_number |
Sequence number of the first available sample in a matched DataWriters reliability queue. | |
SequenceNumber_t | last_available_sample_sequence_number |
Sequence number of the last available sample in a matched Datawriter's reliability queue. | |
SequenceNumber_t | last_committed_sample_sequence_number |
Sequence number of the newest sample received from the matched DataWriter committed to the DataReader's queue. | |
int | uncommitted_sample_count |
Number of received samples that are not yet available to be read or taken, due to being received out of order. | |
Additional Inherited Members | |
![]() | |
abstract boolean | equals (Object obj) |
abstract int | hashCode () |
String | toString () |
![]() | |
Struct () | |
abstract void | pull_from_nativeI (long native_status) |
abstract void | push_to_nativeI (long native_status) |
<<extension>> The status of a reader's internal protocol related metrics, like the number of samples received, filtered, rejected; and status of wire protocol traffic.
long received_sample_count |
The number of samples received by a DataReader.
Depending on how the com.rti.dds.subscription.DataReaderProtocolStatus was obtained this may count samples coming from a specific DataWriter or from all the DataWriters that are matched with the DataReader.
If the com.rti.dds.subscription.DataReaderProtocolStatus is obtained using the com.rti.dds.subscription.DataReader.get_datareader_protocol_status operation then it will count samples from any DataWriter. If the DataReaderProtocolStatus is obtained using the com.rti.dds.subscription.DataReader.get_matched_publication_datareader_protocol_status then it will count the samples for the DataWriter specified as a parameter to the function.
Duplicate samples arriving from the DataWriter(s) (e.g. via multiple network paths) are detected prior to increasing this counter. The duplicate samples are counted by com.rti.dds.subscription.DataReaderProtocolStatus.duplicate_sample_count.
If the DataReader has specified a ContentFilter the received samples that do not pass the filter are part of this counter. The filtered samples are counted by com.rti.dds.subscription.DataReaderProtocolStatus.filtered_sample_count.
Samples rejected because they do not fit on the DataReader Queue are also part of this counter.
Note the received_sample_count counts samples received from all DataWriters and it does not necessarily match the number of samples accepted into the DataReader Queue. This is because:
long received_sample_count_change |
The incremental change in the number of samples received from a DataReader since the last time the status was read.
long received_sample_bytes |
The number of bytes received by a DataReader.
long received_sample_bytes_change |
The incremental change in the number of bytes received from a DataReader since the last time the status was read.
long duplicate_sample_count |
The number of samples from a remote DataWriter received, not for the first time, by a local DataReader.
Such samples can be redundant, out-of-order, etc. and are not stored in the reader's queue.
long duplicate_sample_count_change |
The incremental change in the number of samples from a remote DataWriter received, not for the first time, by a local DataReader since the last time the status was read.
Such samples can be redundant, out-of-order, etc. and are not stored in the reader's queue.
long duplicate_sample_bytes |
The number of bytes of samples from a remote DataWriter received, not for the first time, by a local DataReader.
Such samples can be redundant, out-of-order, etc. and are not stored in the reader's queue.
long duplicate_sample_bytes_change |
The incremental change in the number of bytes of samples from a remote DataWriter received, not for the first time, by a local DataReader since the last time the status was read.
Such samples can be redundant, out-of-order, etc. and are not stored in the reader's queue.
long filtered_sample_count |
The number of user samples filtered by the local DataReader due to Content-Filtered Topics or Time-Based Filter.
long filtered_sample_count_change |
The incremental change in the number of user samples filtered by the local DataReader due to Content-Filtered Topics or Time-Based Filter since the last time the status was read.
long filtered_sample_bytes |
The number of bytes of user samples filtered by the local DataReader due to Content-Filtered Topics or Time-Based Filter.
long filtered_sample_bytes_change |
The incremental change in the number of bytes of user samples filtered by the local DataReader due to Content-Filtered Topics or Time-Based Filter since the last time the status was read.
long received_heartbeat_count |
The number of Heartbeats from a remote DataWriter received by a local DataReader.
long received_heartbeat_count_change |
The incremental change in the number of Heartbeats from a remote DataWriter received by a local DataReader since the last time the status was read.
long received_heartbeat_bytes |
The number of bytes of Heartbeats from a remote DataWriter received by a local DataReader.
long received_heartbeat_bytes_change |
The incremental change in the number of bytes of Heartbeats from a remote DataWriter received by a local DataReader since the last time the status was read.
long sent_ack_count |
The number of ACKs sent from a local DataReader to a matching remote DataWriter.
long sent_ack_count_change |
The incremental change in the number of ACKs sent from a local DataReader to a matching remote DataWriter since the last time the status was read.
long sent_ack_bytes |
The number of bytes of ACKs sent from a local DataReader to a matching remote DataWriter.
long sent_ack_bytes_change |
The incremental change in the number of bytes of ACKs sent from a local DataReader to a matching remote DataWriter since the last time the status was read.
long sent_nack_count |
The number of NACKs sent from a local DataReader to a matching remote DataWriter.
long sent_nack_count_change |
The incremental change in the number of NACKs sent from a local DataReader to a matching remote DataWriter since the last time the status was read.
long sent_nack_bytes |
The number of bytes of NACKs sent from a local DataReader to a matching remote DataWriter.
long sent_nack_bytes_change |
The incremental change in the number of bytes of NACKs sent from a local DataReader to a matching remote DataWriter since the last time the status was read.
long received_gap_count |
The number of GAPs received from remote DataWriter to this DataReader.
long received_gap_count_change |
The incremental change in the number of GAPs received from remote DataWriter to this DataReader since the last time the status was read.
long received_gap_bytes |
The number of bytes of GAPs received from remote DataWriter to this DataReader.
long received_gap_bytes_change |
The incremental change in the number of bytes of GAPs received from remote DataWriter to this DataReader since the last time the status was read.
long rejected_sample_count |
The number of times a sample is rejected due to exceptions in the receive path.
long rejected_sample_count_change |
The incremental change in the number of times a sample is rejected due to exceptions in the receive path since the last time the status was read.
SequenceNumber_t first_available_sample_sequence_number |
Sequence number of the first available sample in a matched DataWriters reliability queue.
Applicable only for reliable DataReaders, and when retrieving matched DataWriter statuses.
Updated upon receiving Heartbeat submessages from a matched reliable DataWriter.
SequenceNumber_t last_available_sample_sequence_number |
Sequence number of the last available sample in a matched Datawriter's reliability queue.
Applicable only for reliable DataReaders, and when retrieving matched DataWriter statuses.
Updated upon receiving Heartbeat submessages from a matched reliable DataWriter.
SequenceNumber_t last_committed_sample_sequence_number |
Sequence number of the newest sample received from the matched DataWriter committed to the DataReader's queue.
Applicable only when retrieving matched DataWriter statuses.
For best-effort DataReaders, this is the sequence number of the latest sample received.
For reliable DataReaders, this is the sequence number of the latest sample that is available to be read or taken from the DataReader's queue.
int uncommitted_sample_count |
Number of received samples that are not yet available to be read or taken, due to being received out of order.
Applicable only when retrieving matched DataWriter statuses.