RTI Connext Java API
Version 6.1.0
|
Configurable IPv6/UDP Transport-Plugin properties. More...
Public Member Functions | |
Property_t () | |
Public Attributes | |
int | send_socket_buffer_size |
Size in bytes of the send buffer of a socket used for sending. More... | |
int | recv_socket_buffer_size |
Size in bytes of the receive buffer of a socket used for receiving. More... | |
int | unicast_enabled |
Allows the transport plugin to use unicast for sending and receiving. More... | |
int | multicast_enabled |
Allows the transport plugin to use multicast for sending and receiving. More... | |
int | multicast_ttl |
Value for the time-to-live parameter for all multicast sends using this plugin. More... | |
int | multicast_loopback_disabled |
Prevents the transport plugin from putting multicast packets onto the loopback interface. More... | |
int | ignore_loopback_interface |
Prevents the transport plugin from using the IP loopback interface. More... | |
int | ignore_nonrunning_interfaces |
Prevents the transport plugin from using a network interface that is not reported as RUNNING by the operating system. More... | |
int | no_zero_copy |
[DEPRECATED] Prevents the transport plugin from doing zero copy. More... | |
int | send_blocking |
Control blocking behavior of send sockets. CHANGING THIS FROM THE DEFAULT CAN CAUSE SIGNIFICANT PERFORMANCE PROBLEMS. More... | |
int | enable_v4mapped |
Specify whether UDPv6 transport will process IPv4 addresses. More... | |
long | transport_priority_mask |
Set mask for use of transport priority field. More... | |
int | transport_priority_mapping_low |
Set low value of output range to IPv6 TCLASS. More... | |
int | transport_priority_mapping_high |
Set high value of output range to IPv6 TCLASS. More... | |
![]() | |
final int | classid |
The Transport-Plugin Class ID. More... | |
final int | address_bit_count |
Number of bits in a 16-byte address that are used by the transport. Should be between 0 and 128. More... | |
final int | properties_bitmap |
A bitmap that defines various properties of the transport to the RTI Connext core. More... | |
int | gather_send_buffer_count_max |
Specifies the maximum number of buffers that RTI Connext can pass to the send() method of a transport plugin. More... | |
int | message_size_max |
The maximum size of an RTPS message in bytes that can be sent or received by the transport plugin. More... | |
final StringSeq | allow_interfaces_list |
A list of strings, each identifying a range of interface addresses or an interface name. If the list is non-empty (i.e., allow_interfaces_list_length > 0), allow the use of only these interfaces. If the list is empty, allow the use of all interfaces. More... | |
final StringSeq | deny_interfaces_list |
A list of strings, each identifying a range of interface addresses or an interface name. If the list is non-empty (i.e., deny_interfaces_list_length > 0), deny the use of these interfaces. More... | |
final StringSeq | allow_multicast_interfaces_list |
A list of strings, each identifying a range of interface addresses or an interface name. If the list is non-empty (i.e., allow_multicast_interfaces_list_length > 0), allow the use of multicast only on these interfaces; otherwise allow the use of all the allowed interfaces. More... | |
final StringSeq | deny_multicast_interfaces_list |
A list of strings, each identifying a range of interface addresses or an interface name. If the list is non-empty (i.e., deny_multicast_interfaces_list_length > 0), deny the use of those interfaces for multicast. More... | |
byte [] | transport_uuid = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} |
Univocally identifies a transport plugin. More... | |
Additional Inherited Members | |
![]() | |
static final int | NDDS_TRANSPORT_CLASSID_INVALID = -1 |
Invalid Transport Class ID. More... | |
static final int | NDDS_TRANSPORT_CLASSID_RESERVED_RANGE = 1000 |
Transport-Plugin class IDs below this are reserved by RTI. More... | |
static final int | NDDS_TRANSPORT_PROPERTY_BIT_BUFFER_ALWAYS_LOANED = 0x2 |
Specified zero-copy behavior of transport. More... | |
static final int | NDDS_TRANSPORT_PROPERTY_GATHER_SEND_BUFFER_COUNT_MIN = 3 |
Minimum number of gather-send buffers that must be supported by a Transport Plugin implementation. More... | |
Configurable IPv6/UDP Transport-Plugin properties.
You can modify the properties in this structure to configure the plugin. However, you must set the properties before the plugin is instantiated.
Property_t | ( | ) |
Create an empty UDPv6Transport property with default values
References UDPv6Transport.BLOCKING_ALWAYS, UDPv6Transport.Property_t.enable_v4mapped, UDPv6Transport.Property_t.ignore_loopback_interface, UDPv6Transport.Property_t.ignore_nonrunning_interfaces, UDPv6Transport.Property_t.multicast_enabled, UDPv6Transport.Property_t.multicast_loopback_disabled, UDPv6Transport.Property_t.multicast_ttl, UDPv6Transport.Property_t.no_zero_copy, UDPv6Transport.Property_t.recv_socket_buffer_size, UDPv6Transport.Property_t.send_blocking, UDPv6Transport.Property_t.send_socket_buffer_size, UDPv6Transport.Property_t.transport_priority_mapping_high, UDPv6Transport.Property_t.transport_priority_mapping_low, UDPv6Transport.Property_t.transport_priority_mask, and UDPv6Transport.Property_t.unicast_enabled.
int send_socket_buffer_size |
Size in bytes of the send buffer of a socket used for sending.
On most operating systems, setsockopt()
will be called to set the SENDBUF to the value of this parameter.
This value must be greater than or equal to com.rti.ndds.transport.Transport.Property_t.message_size_max. The maximum value is operating system-dependent.
By default, it will be set to com.rti.ndds.transport.UDPv6Transport_SEND_SOCKET_BUFFER_SIZE_DEFAULT.
If you configure this parameter to be com.rti.ndds.transport.UDPv6Transport_SOCKET_BUFFER_SIZE_OS_DEFAULT, then setsockopt()
(or equivalent) will not be called to size the send buffer of the socket. The transport will use the OS default.
Referenced by UDPv6Transport.Property_t.Property_t().
int recv_socket_buffer_size |
Size in bytes of the receive buffer of a socket used for receiving.
On most operating systems, setsockopt()
will be called to set the RECVBUF to the value of this parameter.
This value must be greater than or equal to com.rti.ndds.transport.Transport.Property_t.message_size_max. The maximum value is operating system-dependent.
By default, it will be set to com.rti.ndds.transport.UDPv6Transport_RECV_SOCKET_BUFFER_SIZE_DEFAULT.
If you configure this parameter to be com.rti.ndds.transport.UDPv6Transport_SOCKET_BUFFER_SIZE_OS_DEFAULT, then setsockopt()
(or equivalent) will not be called to size the receive buffer of the socket. The transport will use the OS default.
Referenced by UDPv6Transport.Property_t.Property_t().
int unicast_enabled |
Allows the transport plugin to use unicast for sending and receiving.
This value turns unicast UDP on (if set to 1) or off (if set to 0) for this plugin. By default, it will be turned on (1). Also by default, the plugin will use all the allowed network interfaces that it finds up and running when the plugin is instantiated.
Referenced by UDPv6Transport.Property_t.Property_t().
int multicast_enabled |
Allows the transport plugin to use multicast for sending and receiving.
This value turns multicast UDP on (if set to 1) or off (if set to 0) for this plugin. By default, it will be turned on (1) for those platforms that support multicast. Also by default, the plugin will use the all network interfaces allowed for multicast that it finds up and running when the plugin is instantiated.
Referenced by UDPv6Transport.Property_t.Property_t().
int multicast_ttl |
Value for the time-to-live parameter for all multicast sends using this plugin.
This is used to set the TTL of multicast packets sent by this transport plugin.
[default] 1
Referenced by UDPv6Transport.Property_t.Property_t().
int multicast_loopback_disabled |
Prevents the transport plugin from putting multicast packets onto the loopback interface.
If multicast loopback is disabled (this value is set to 1), then when sending multicast packets, RTI Connext will not put a copy of the packets on the loopback interface. This prevents applications on the same node (including itself) from receiving those packets.
This value is set to 0 by default, meaning multicast loopback is enabled.
Disabling multicast loopback (setting this value to 1) may result in minor performance gains when using multicast.
Referenced by UDPv6Transport.Property_t.Property_t().
int ignore_loopback_interface |
Prevents the transport plugin from using the IP loopback interface.
Currently three values are allowed:
The current "automatic" (-1) RTI Connext policy is as follows.
[default] -1 Automatic RTI Connext policy based on availability of the shared memory transport.
Referenced by UDPv6Transport.Property_t.Property_t().
int ignore_nonrunning_interfaces |
Prevents the transport plugin from using a network interface that is not reported as RUNNING by the operating system.
The transport checks the flags reported by the operating system for each network interface upon initialization. An interface that is not reported as UP will not be used. This property allows the same check to be extended to the IFF_RUNNING flag implemented by some operating systems. The RUNNING flag is defined to mean that "all resources are allocated," and may be off if there is no link detected, e.g., the network cable is unplugged.
Two values are allowed:
[default] 1 (i.e., check RUNNING flag)
Referenced by UDPv6Transport.Property_t.Property_t().
int no_zero_copy |
[DEPRECATED] Prevents the transport plugin from doing zero copy.
DEPRECATED: This property has no effect. By default, this plugin will use the zero copy on OSes that offer it. While this is good for performance, it may sometimes tax the OS resources in a manner that cannot be overcome by the application.
The best example is if the hardware/device driver lends the buffer to the application itself. If the application does not return the loaned buffers soon enough, the node may error or malfunction. If you cannot reconfigure the H/W, device driver, or the OS to allow the zero copy feature to work for your application, you may have no choice but to turn off the use of zero copy.
By default this is set to 0, so RTI Connext will use the zero copy API if offered by the OS.
Referenced by UDPv6Transport.Property_t.Property_t().
int send_blocking |
Control blocking behavior of send sockets. CHANGING THIS FROM THE DEFAULT CAN CAUSE SIGNIFICANT PERFORMANCE PROBLEMS.
Currently two values are defined:
[default] NDDS_TRANSPORT_UDPV6_BLOCKING_ALWAYS.
Referenced by UDPv6Transport.Property_t.Property_t().
int enable_v4mapped |
Specify whether UDPv6 transport will process IPv4 addresses.
Set this to 1 to turn on processing of IPv4 addresses. Note that this may make it incompatible with use of the UDPv4 transport within the same domain participant.
[default] 0.
Referenced by UDPv6Transport.Property_t.Property_t().
long transport_priority_mask |
Set mask for use of transport priority field.
If transport priority mapping is supported on the platform, this mask is used in conjunction with com.rti.ndds.transport.UDPv6Transport.Property_t.transport_priority_mapping_low and com.rti.ndds.transport.UDPv6Transport.Property_t.transport_priority_mapping_high to define the mapping from the DDS transport priority (see TRANSPORT_PRIORITY) to the IPv6 TCLASS field. Defines a contiguous region of bits in the 32-bit transport priority value that is used to generate values for the IPv6 TCLASS field on an outgoing socket.
For example, the value 0x0000ff00 causes bits 9-16 (8 bits) to be used in the mapping. The value will be scaled from the mask range (0x0000 - 0xff00 in this case) to the range specified by low and high.
If the mask is set to zero, then the transport will not set IPv6 TCLASS for send sockets.
[default] 0.
Referenced by UDPv6Transport.Property_t.Property_t().
int transport_priority_mapping_low |
Set low value of output range to IPv6 TCLASS.
This is used in conjunction with com.rti.ndds.transport.UDPv6Transport.Property_t.transport_priority_mask and com.rti.ndds.transport.UDPv6Transport.Property_t.transport_priority_mapping_high to define the mapping from the DDS transport priority to the IPv6 TCLASS field. Defines the low value of the output range for scaling.
Note that IPv6 TCLASS is generally an 8-bit value.
[default] 0.
Referenced by UDPv6Transport.Property_t.Property_t().
int transport_priority_mapping_high |
Set high value of output range to IPv6 TCLASS.
This is used in conjunction with com.rti.ndds.transport.UDPv6Transport.Property_t.transport_priority_mask and com.rti.ndds.transport.UDPv6Transport.Property_t.transport_priority_mapping_low to define the mapping from the DDS transport priority to the IPv6 TCLASS field. Defines the high value of the output range for scaling.
Note that IPv6 TCLASS is generally an 8-bit value.
[default] 0xff.
Referenced by UDPv6Transport.Property_t.Property_t().