<<interface>> The singleton type used to configure RTI Connext logging. More...

#include <managed_config_dotnet.h>

Public Member Functions
LogVerbosity	get_verbosity ()
	Get the verbosity at which RTI Connext is currently logging diagnostic information. More...

LogVerbosity	get_verbosity_by_category (LogCategory category)
	Get the verbosity at which RTI Connext is currently logging diagnostic information in the given category. More...

void	set_verbosity (LogVerbosity verbosity)
	Set the verbosity at which RTI Connext will log diagnostic information. More...

void	set_verbosity_by_category (LogCategory category, LogVerbosity verbosity)
	Set the verbosity at which RTI Connext will log diagnostic information in the given category. More...

System::Boolean	set_output_device (LoggerDevice^ outDevice)
	Register a NDDS::LoggerDevice. More...

System::Boolean	set_output_file_set (System::String^ file_prefix, System::String^ file_suffix, System::Int32 max_capacity, System::Int32 max_files)
	Configure a set of files to redirect the logged output. More...

LogPrintFormat	get_print_format ()
	Get the current message format for the log level NDDS_CONFIG_LOG_LEVEL_ERROR. More...

System::Boolean	set_print_format (LogPrintFormat print_format)
	Set the message format that RTI Connext will use to log diagnostic information for all the log levels, except for NDDS_CONFIG_LOG_LEVEL_FATAL_ERROR. When the Activity Context is printed, the user can select the information that will be part of the Activity Context by using the API NDDS::ActivityContext::set_attribute_mask. More...

LogPrintFormat	get_print_format_by_log_level (LogLevel log_level)
	Get the current message format, by log level, that RTI Connext is using to log diagnostic information. More...

System::Boolean	set_print_format_by_log_level (LogPrintFormat print_format, LogLevel log_level)
	Set the message format, by log level, that RTI Connext will use to log diagnostic information. When the Activity Context is printed, the user can select the information that will be part of the Activity Context by using the API NDDS::ActivityContext::set_attribute_mask. More...

Static Public Member Functions
static ConfigLogger ^	get_instance ()
	Get the singleton instance of this type. More...

static void	set_log_delegate (LogCallbackDelegate^ cb)
	Install a custom callback for logging. More...

static LogCallbackDelegate ^	get_log_delegate ()
	Get the custom logging callback, if any has been installed. More...

Detailed Description

<<interface>> The singleton type used to configure RTI Connext logging.

Member Function Documentation

◆ get_instance()

static ConfigLogger ^ NDDS::ConfigLogger::get_instance ( )

inlinestatic

Get the singleton instance of this type.

◆ get_verbosity()

LogVerbosity NDDS::ConfigLogger::get_verbosity ( )

Get the verbosity at which RTI Connext is currently logging diagnostic information.

The default verbosity if NDDS::ConfigLogger::set_verbosity is never called is NDDS_CONFIG_LOG_VERBOSITY_ERROR.

If NDDS::ConfigLogger::set_verbosity_by_category has been used to set different verbosities for different categories of messages, this method will return the maximum verbosity of all categories.

◆ get_verbosity_by_category()

LogVerbosity NDDS::ConfigLogger::get_verbosity_by_category ( LogCategory category )

Get the verbosity at which RTI Connext is currently logging diagnostic information in the given category.

The default verbosity if NDDS::ConfigLogger::set_verbosity and NDDS::ConfigLogger::set_verbosity_by_category are never called is NDDS_CONFIG_LOG_VERBOSITY_ERROR.

◆ set_verbosity()

void NDDS::ConfigLogger::set_verbosity ( LogVerbosity verbosity )

Set the verbosity at which RTI Connext will log diagnostic information.

Note: Logging at high verbosities will be detrimental to your application's performance. Your default setting should typically remain at NDDS_CONFIG_LOG_VERBOSITY_WARNING or below. (The default verbosity if you never set it is NDDS_CONFIG_LOG_VERBOSITY_ERROR.)

◆ set_verbosity_by_category()

void NDDS::ConfigLogger::set_verbosity_by_category	(	LogCategory	category,
		LogVerbosity	verbosity
	)

Set the verbosity at which RTI Connext will log diagnostic information in the given category.

◆ set_output_device()

System::Boolean NDDS::ConfigLogger::set_output_device ( LoggerDevice^ outDevice )

Register a NDDS::LoggerDevice.

Register the specified logging device with the logger.

There can be at most only one device registered with the logger at any given time.

When a device is installed, the logger will stop sending the log messages to the standard output and to the file set with NDDS::ConfigLogger::set_output_file_set.

To remove an existing device, use this method with NULL as the device parameter. After a device is removed the logger will continue sending log messages to the standard output and to the output file.

To replace an existing device with a new device, use this method providing the new device as the device parameter.

When a device is unregistered (by setting it to NULL), NDDS::LoggerDevice calls the method NDDS::LoggerDevice::close.

Parameters

outDevice <<in>> Logging device.

◆ set_output_file_set()

System::Boolean NDDS::ConfigLogger::set_output_file_set	(	System::String^	file_prefix,
		System::String^	file_suffix,
		System::Int32	max_capacity,
		System::Int32	max_files
	)

Configure a set of files to redirect the logged output.

The logged output will be redirected to a set of files whose names are configured with a prefix and a suffix. The maximum number of bytes configures how many bytes to write into a file before opening the next file. After reaching the maximum number of files, the first one is overwritten.

For example, if the prefix is 'Foo', the suffix is '.txt', the max number of bytes is 1GB, and the max number of files is 3, the logger will create (at most) these files: Foo1.txt, Foo2.txt, and Foo3.txt. It will write to Foo1.txt, and after writing 1GB, it will move on to Foo2.txt, then to Foo3.txt, then to Foo1.txt again, and so on.

To stop logging to these files and redirect the output to the platform-specific location, pass NULL, NULL, 0, 0.

◆ get_print_format()

LogPrintFormat NDDS::ConfigLogger::get_print_format ( )

Get the current message format for the log level NDDS_CONFIG_LOG_LEVEL_ERROR.

Use NDDS::ConfigLogger::get_print_format_by_log_level to retrieve the format for other log levels.

If NDDS::ConfigLogger::set_print_format is never called, the default format is NDDS_CONFIG_LOG_PRINT_FORMAT_DEFAULT.

◆ set_print_format()

System::Boolean NDDS::ConfigLogger::set_print_format ( LogPrintFormat print_format )

Set the message format that RTI Connext will use to log diagnostic information for all the log levels, except for NDDS_CONFIG_LOG_LEVEL_FATAL_ERROR. When the Activity Context is printed, the user can select the information that will be part of the Activity Context by using the API NDDS::ActivityContext::set_attribute_mask.

If you use NDDS::ConfigLogger::set_log_delegate(), you cannot also use set_print_format(). You must use NDDS_CONFIG_LOG_PRINT_FORMAT_DEFAULT.

◆ get_print_format_by_log_level()

LogPrintFormat NDDS::ConfigLogger::get_print_format_by_log_level ( LogLevel log_level )

Get the current message format, by log level, that RTI Connext is using to log diagnostic information.

If NDDS::ConfigLogger::set_print_format is never called, the default format is NDDS_CONFIG_LOG_PRINT_FORMAT_DEFAULT.

◆ set_print_format_by_log_level()

System::Boolean NDDS::ConfigLogger::set_print_format_by_log_level	(	LogPrintFormat	print_format,
		LogLevel	log_level
	)

Set the message format, by log level, that RTI Connext will use to log diagnostic information. When the Activity Context is printed, the user can select the information that will be part of the Activity Context by using the API NDDS::ActivityContext::set_attribute_mask.

If you use NDDS::ConfigLogger::set_log_delegate(), you cannot also use set_print_format(). You must use NDDS_CONFIG_LOG_PRINT_FORMAT_DEFAULT.

◆ set_log_delegate()

static void NDDS::ConfigLogger::set_log_delegate ( LogCallbackDelegate^ cb )

static

Install a custom callback for logging.

Custom log delegates are not compatible with the advanced logging information enabled by NDDS::ConfigLogger::set_print_format.

See also: NDDS::ConfigLogger::get_log_delegate; NDDS::LogCallbackDelegate()

For example:

public class MyLogger
{
    public static int MyLoggerCallback(string msg)
    {
        System.Console.Write("MyLoggerCallback: " + msg);
        return 0;
    }
}
...
NDDS.ConfigLogger.set_log_delegate(MyLogger.MyLoggerCallback);

◆ get_log_delegate()

static LogCallbackDelegate ^ NDDS::ConfigLogger::get_log_delegate ( )