RTI Connext Traditional C++ API Version 7.1.0

DDSDataWriter entity and associated elements More...

Classes

struct  DDS_OfferedDeadlineMissedStatus
 DDS_OFFERED_DEADLINE_MISSED_STATUS More...
 
struct  DDS_LivelinessLostStatus
 DDS_LIVELINESS_LOST_STATUS More...
 
struct  DDS_OfferedIncompatibleQosStatus
 DDS_OFFERED_INCOMPATIBLE_QOS_STATUS More...
 
struct  DDS_PublicationMatchedStatus
 DDS_PUBLICATION_MATCHED_STATUS More...
 
struct  DDS_ServiceRequestAcceptedStatus
 DDS_SERVICE_REQUEST_ACCEPTED_STATUS More...
 
struct  DDS_ReliableWriterCacheEventCount
 <<extension>> The number of times the number of unacknowledged samples in the cache of a reliable writer hit a certain well-defined threshold. More...
 
struct  DDS_ReliableWriterCacheChangedStatus
 <<extension>> A summary of the state of a data writer's cache of unacknowledged samples written. More...
 
struct  DDS_ReliableReaderActivityChangedStatus
 <<extension>> Describes the activity (i.e. are acknowledgements forthcoming) of reliable readers matched to a reliable writer. More...
 
struct  DDS_DataWriterCacheStatus
 <<extension>> The status of the DataWriter's cache. Provides information on cache related metrics such as the number of samples and instances in the DataWriter queue. More...
 
struct  DDS_DataWriterProtocolStatus
 <<extension>> The status of a writer's internal protocol related metrics, like the number of samples pushed, pulled, filtered; and status of wire protocol traffic. More...
 
struct  DDS_AcknowledgmentInfo
 Information about an application-level acknowledged sample. More...
 
struct  DDS_DataWriterQos
 QoS policies supported by a DDSDataWriter entity. More...
 
class  FooDataWriter
 <<interface>> <<generic>> User data type specific data writer. More...
 
class  DDSDataWriterListener
 <<interface>> DDSListener for writer status. More...
 
class  DDSDataWriter
 <<interface>> Allows an application to set the value of the data to be published under a given DDSTopic. More...
 

Functions

DDS_Boolean DDS_DataWriterQos_equals (const struct DDS_DataWriterQos *self, const struct DDS_DataWriterQos *other)
 Compares two DDS_DataWriterQos for equality. More...
 
DDS_ReturnCode_t DDS_DataWriterQos::print () const
 Prints this DDS_DataWriterQos to stdout. More...
 
DDS_ReturnCode_t DDS_DataWriterQos::to_string (char *string, DDS_UnsignedLong &string_size) const
 Obtains a string representation of this DDS_DataWriterQos. More...
 
DDS_ReturnCode_t DDS_DataWriterQos::to_string (char *string, DDS_UnsignedLong &string_size, const DDS_DataWriterQos &base) const
 Obtains a string representation of this DDS_DataWriterQos. More...
 
DDS_ReturnCode_t DDS_DataWriterQos::to_string (char *string, DDS_UnsignedLong &string_size, const DDS_QosPrintFormat &format) const
 Obtains a string representation of this DDS_DataWriterQos. More...
 
DDS_ReturnCode_t DDS_DataWriterQos::to_string (char *string, DDS_UnsignedLong &string_size, const DDS_DataWriterQos &base, const DDS_QosPrintFormat &format) const
 Obtains a string representation of this DDS_DataWriterQos. More...
 
DDS_ReturnCode_t DDS_DataWriterQos::to_string (char *string, DDS_UnsignedLong &string_size, const DDS_QosPrintAll_t &) const
 Obtains a string representation of this DDS_DataWriterQos. More...
 
DDS_ReturnCode_t DDS_DataWriterQos::to_string (char *string, DDS_UnsignedLong &string_size, const DDS_QosPrintAll_t &, const DDS_QosPrintFormat &format) const
 Obtains a string representation of this DDS_DataWriterQos. More...
 

Detailed Description

DDSDataWriter entity and associated elements

Function Documentation

◆ DDS_DataWriterQos_equals()

DDS_Boolean DDS_DataWriterQos_equals ( const struct DDS_DataWriterQos self,
const struct DDS_DataWriterQos other 
)

Compares two DDS_DataWriterQos for equality.

Parameters
self<<in>> This DataWriterQos.
other<<in>> The other DataWriterQos to be compared with this DataWriterQos.
Returns
DDS_BOOLEAN_TRUE if the two Qos objects are equal or DDS_BOOLEAN_FALSE otherwise.

Referenced by DDS_DataWriterQos::operator!=(), and DDS_DataWriterQos::operator==().

◆ print()

DDS_ReturnCode_t DDS_DataWriterQos::print ( ) const
inline

Prints this DDS_DataWriterQos to stdout.

Only the differences between this DDS_DataWriterQos and the documented default are printed. If you wish to print everything regardless, see DDS_DataWriterQos::to_string(char*, DDS_UnsignedLong&, const DDS_DataWriterQos&, const DDS_QosPrintFormat&) const. The output is formatted according to the default values for DDS_QosPrintFormat.

Returns
DDS_RETCODE_OK if no error was encountered.

◆ to_string() [1/6]

DDS_ReturnCode_t DDS_DataWriterQos::to_string ( char *  string,
DDS_UnsignedLong string_size 
) const
inline

Obtains a string representation of this DDS_DataWriterQos.

Only the differences between this DDS_DataWriterQos and the documented default are printed to the string. If you wish to print everything regardless, see DDS_DataWriterQos::to_string(char*, DDS_UnsignedLong&, const DDS_DataWriterQos&, const DDS_QosPrintFormat&) const. The output is formatted according to the default values for DDS_QosPrintFormat.

If the supplied buffer is NULL, the required length of the string is returned via the string_size parameter.

If the supplied buffer is not NULL, the string representation of the DDS_DataWriterQos is written to the buffer.

Parameters
string<<out>> The char buffer that will be used to store the string representation of this DDS_DataWriterQos. If NULL, this function will return the required length of this buffer through the string_size parameter.
string_size<<inout>> Cannot be NULL. The size of the supplied buffer. If the supplied buffer is NULL, or if the supplied buffer is not large enough, this value will be updated with the required length of the buffer.
Returns
DDS_RETCODE_OK if no error was encountered.
See also
DDS_DataWriterQos::to_string(char*, DDS_UnsignedLong&, const DDS_DataWriterQos&, const DDS_QosPrintFormat&) const

◆ to_string() [2/6]

DDS_ReturnCode_t DDS_DataWriterQos::to_string ( char *  string,
DDS_UnsignedLong string_size,
const DDS_DataWriterQos base 
) const
inline

Obtains a string representation of this DDS_DataWriterQos.

This overload behaves the same as DDS_DataWriterQos::to_string but allows the caller to specify the DDS_DataWriterQos, which is used as the base profile. Only the differences between the QoS and the base profile are included in the output string.

Parameters
string<<out>> The char buffer that will be used to store the string representation of this DDS_DataWriterQos. If NULL, this function will return the required length of this buffer through the string_size parameter.
string_size<<inout>> Cannot be NULL. The size of the supplied buffer. If the supplied buffer is NULL, or if the supplied buffer is not large enough, this value will be updated with the required length of the buffer.
base<<in>> The DDS_DataWriterQos to be used as the base QoS profile. Only the differences with respect to this base profile will be included in the output string.
Returns
DDS_RETCODE_OK if no error was encountered.
See also
DDS_DataWriterQos::to_string(char*, DDS_UnsignedLong&, const DDS_DataWriterQos&, const DDS_QosPrintFormat&) const

References DDS_QosPrintFormat_INITIALIZER.

◆ to_string() [3/6]

DDS_ReturnCode_t DDS_DataWriterQos::to_string ( char *  string,
DDS_UnsignedLong string_size,
const DDS_QosPrintFormat format 
) const
inline

Obtains a string representation of this DDS_DataWriterQos.

This overload behaves the same as DDS_DataWriterQos::to_string but allows the caller to specify the DDS_QosPrintFormat which is used to format the output.

Parameters
string<<out>> The char buffer that will be used to store the string representation of this DDS_DataWriterQos. If NULL, this function will return the required length of this buffer through the string_size parameter.
string_size<<inout>> Cannot be NULL. The size of the supplied buffer. If the supplied buffer is NULL, or if the supplied buffer is not large enough, this value will be updated with the required length of the buffer.
format<<in>> The DDS_QosPrintFormat to be used to format the output string.
Returns
DDS_RETCODE_OK if no error was encountered.
See also
DDS_DataWriterQos::to_string(char*, DDS_UnsignedLong&, const DDS_DataWriterQos&, const DDS_QosPrintFormat&) const

References DDS_RETCODE_ERROR, and DDS_RETCODE_OK.

◆ to_string() [4/6]

DDS_ReturnCode_t DDS_DataWriterQos::to_string ( char *  string,
DDS_UnsignedLong string_size,
const DDS_DataWriterQos base,
const DDS_QosPrintFormat format 
) const
inline

Obtains a string representation of this DDS_DataWriterQos.

Only the differences between this DDS_DataWriterQos and the DDS_DataWriterQos supplied as the base are printed to the string.

If the supplied buffer is NULL, the required length of the string is returned via the string_size parameter.

If the supplied buffer is not NULL, the string representation of the DDS_DataWriterQos is written to the buffer.

Parameters
string<<out>> The char buffer that will be used to store the string representation of this DDS_DataWriterQos. If NULL, this function will return the required length of this buffer through the string_size parameter.
string_size<<inout>> Cannot be NULL. The size of the supplied buffer. If the supplied buffer is NULL, or if the supplied buffer is not large enough, this value will be updated with the required length of the buffer.
base<<in>> The DDS_DataWriterQos to be used as the base QoS profile. Only the differences with respect to this base profile will be included in the output string.
format<<in>> The DDS_QosPrintFormat to be used to format the output string.
Returns
DDS_RETCODE_OK if no error was encountered.

◆ to_string() [5/6]

DDS_ReturnCode_t DDS_DataWriterQos::to_string ( char *  string,
DDS_UnsignedLong string_size,
const DDS_QosPrintAll_t  
) const
inline

Obtains a string representation of this DDS_DataWriterQos.

This overload behaves the same as DDS_DataWriterQos::to_string but prints the entire DDS_DataWriterQos object. The only valid value for the argument of type DDS_QosPrintAll_t is DDS_QOS_PRINT_ALL.

For example

DataWriterQos qos;
char *str = NULL;
DDS_UnsignedLong str_size = 0;
qos.to_string(str, str_size, QOS_PRINT_ALL);
RTICdrUnsignedLong DDS_UnsignedLong
Defines an unsigned long integer data type, equivalent to IDL/CDR unsigned long.
Definition: dds_c.1.0/interface/common.ifc:249
DDS_ReturnCode_t to_string(char *string, DDS_UnsignedLong &string_size) const
Obtains a string representation of this DDS_DataWriterQos.
Definition: publication.ifc:1085

The resultant string is formatted according to the default value for DDS_QosPrintFormat.

Parameters
string<<out>> The char buffer that will be used to store the string representation of this DDS_DataWriterQos. If NULL, this function will return the required length of this buffer through the string_size parameter.
string_size<<inout>> Cannot be NULL. The size of the supplied buffer. If the supplied buffer is NULL, or if the supplied buffer is not large enough, this value will be updated with the required length of the buffer.
Returns
DDS_RETCODE_OK if no error was encountered.
See also
DDS_DataWriterQos::to_string(char*, DDS_UnsignedLong&, const DDS_DataWriterQos&, const DDS_QosPrintFormat&) const

References DDS_QosPrintFormat_INITIALIZER.

◆ to_string() [6/6]

DDS_ReturnCode_t DDS_DataWriterQos::to_string ( char *  string,
DDS_UnsignedLong string_size,
const DDS_QosPrintAll_t ,
const DDS_QosPrintFormat format 
) const
inline

Obtains a string representation of this DDS_DataWriterQos.

This overload behaves the same as the DDS_DataWriterQos::to_string(char*, DDS_UnsignedLong&, const DDS_QosPrintAll_t&) const overload. The only difference is that it allows the caller to specify the DDS_QosPrintFormat which is used to format the resultant string.

Parameters
string<<out>> The char buffer that will be used to store the string representation of this DDS_DataWriterQos. If NULL, this function will return the required length of this buffer through the string_size parameter.
string_size<<inout>> Cannot be NULL. The size of the supplied buffer. If the supplied buffer is NULL, or if the supplied buffer is not large enough, this value will be updated with the required length of the buffer.
format<<in>> The DDS_QosPrintFormat to be used to format the output string.
Returns
DDS_RETCODE_OK if no error was encountered.
See also
DDS_DataWriterQos::to_string(char*, DDS_UnsignedLong&, const DDS_DataWriterQos&, const DDS_QosPrintFormat&) const