|
RTI Connext Traditional C++ API Version 7.2.0
|
<<extension>> The status of the reader's cache. More...
Public Attributes | |
| DDS_LongLong | sample_count_peak |
| The highest number of samples in the reader's queue over the lifetime of the reader. More... | |
| DDS_LongLong | sample_count |
| The number of samples in the reader's queue. More... | |
| DDS_LongLong | old_source_timestamp_dropped_sample_count |
| The number of samples dropped as a result of receiving a sample older than the last one, using DDS_BY_SOURCE_TIMESTAMP_DESTINATIONORDER_QOS. More... | |
| DDS_LongLong | tolerance_source_timestamp_dropped_sample_count |
| The number of samples dropped as a result of receiving a sample in the future, using DDS_BY_SOURCE_TIMESTAMP_DESTINATIONORDER_QOS. More... | |
| DDS_LongLong | ownership_dropped_sample_count |
| The number of samples dropped as a result of receiving a sample from a DataWriter with a lower strength, using Exclusive Ownership. More... | |
| DDS_LongLong | content_filter_dropped_sample_count |
| The number of user samples filtered by the DataReader due to Content-Filtered Topics. More... | |
| DDS_LongLong | time_based_filter_dropped_sample_count |
| The number of user samples filtered by the DataReader due to DDS_TimeBasedFilterQosPolicy. More... | |
| DDS_LongLong | expired_dropped_sample_count |
| The number of samples expired by the DataReader due to DDS_LifespanQosPolicy or the autopurge sample delays. More... | |
| DDS_LongLong | virtual_duplicate_dropped_sample_count |
| The number of virtual duplicate samples dropped by the DataReader. A sample is a virtual duplicate if it has the same identity (Virtual Writer GUID and Virtual Sequence Number) as a previously received sample. More... | |
| DDS_LongLong | replaced_dropped_sample_count |
| The number of samples replaced by the DataReader due to DDS_KEEP_LAST_HISTORY_QOS replacement. More... | |
| DDS_LongLong | writer_removed_batch_sample_dropped_sample_count |
| The number of batch samples received by the DataReader that were marked as removed by the DataWriter. More... | |
| DDS_LongLong | total_samples_dropped_by_instance_replacement |
| The number of samples with sample state DDS_NOT_READ_SAMPLE_STATE that were dropped when removing an instance due to instance replacement. See DDS_DataReaderResourceLimitsQosPolicy::instance_replacement for more details about when instances are replaced. More... | |
| DDS_LongLong | alive_instance_count |
| The number of instances in the DataReader's queue with an instance state equal to DDS_ALIVE_INSTANCE_STATE. More... | |
| DDS_LongLong | alive_instance_count_peak |
| The highest value of DDS_DataReaderCacheStatus::alive_instance_count over the lifetime of the DataReader. More... | |
| DDS_LongLong | no_writers_instance_count |
| The number of instances in the DataReader's queue with an instance state equal to DDS_NOT_ALIVE_NO_WRITERS_INSTANCE_STATE. More... | |
| DDS_LongLong | no_writers_instance_count_peak |
| The highest value of DDS_DataReaderCacheStatus::no_writers_instance_count over the lifetime of the DataReader. More... | |
| DDS_LongLong | disposed_instance_count |
| The number of instances in the DataReader's queue with an instance state equal to DDS_NOT_ALIVE_DISPOSED_INSTANCE_STATE. More... | |
| DDS_LongLong | disposed_instance_count_peak |
| The highest value of DDS_DataReaderCacheStatus::disposed_instance_count over the lifetime of the DataReader. More... | |
| DDS_LongLong | detached_instance_count |
| The number of minimal instance states currently being maintained in the DataReader's queue. More... | |
| DDS_LongLong | detached_instance_count_peak |
| The highest value of DDS_DataReaderCacheStatus::detached_instance_count over the lifetime of the DataReader. More... | |
| DDS_LongLong | compressed_sample_count |
| The number of received compressed samples by a DataWriter. More... | |
<<extension>> The status of the reader's cache.
| DDS_LongLong DDS_DataReaderCacheStatus::sample_count_peak |
The highest number of samples in the reader's queue over the lifetime of the reader.
| DDS_LongLong DDS_DataReaderCacheStatus::sample_count |
The number of samples in the reader's queue.
includes samples that may not yet be available to be read or taken by the user, due to samples being received out of order or PRESENTATION
| DDS_LongLong DDS_DataReaderCacheStatus::old_source_timestamp_dropped_sample_count |
The number of samples dropped as a result of receiving a sample older than the last one, using DDS_BY_SOURCE_TIMESTAMP_DESTINATIONORDER_QOS.
When the DataReader is using DDS_BY_SOURCE_TIMESTAMP_DESTINATIONORDER_QOS:
| DDS_LongLong DDS_DataReaderCacheStatus::tolerance_source_timestamp_dropped_sample_count |
The number of samples dropped as a result of receiving a sample in the future, using DDS_BY_SOURCE_TIMESTAMP_DESTINATIONORDER_QOS.
When the DataReader is using DDS_BY_SOURCE_TIMESTAMP_DESTINATIONORDER_QOS: the DataReader will accept a sample only if the source timestamp is no farther in the future from the reception timestamp than the source_timestamp_tolerance. Otherwise, the sample is dropped.
| DDS_LongLong DDS_DataReaderCacheStatus::ownership_dropped_sample_count |
The number of samples dropped as a result of receiving a sample from a DataWriter with a lower strength, using Exclusive Ownership.
When using Exclusive Ownership, the DataReader receives data from multiple DataWriters. Each instance can only be owned by one DataWriter.
If other DataWriters write samples on this instance, the samples will be dropped.
| DDS_LongLong DDS_DataReaderCacheStatus::content_filter_dropped_sample_count |
The number of user samples filtered by the DataReader due to Content-Filtered Topics.
When using a content filter on the DataReader side, if the sample received by the DataReader does not pass the filter, it will be dropped.
| DDS_LongLong DDS_DataReaderCacheStatus::time_based_filter_dropped_sample_count |
The number of user samples filtered by the DataReader due to DDS_TimeBasedFilterQosPolicy.
When using TIME_BASED_FILTER on the DataReader side, if the sample received by the DataReader does not pass the minimum_separation filter, it will be dropped.
| DDS_LongLong DDS_DataReaderCacheStatus::expired_dropped_sample_count |
The number of samples expired by the DataReader due to DDS_LifespanQosPolicy or the autopurge sample delays.
| DDS_LongLong DDS_DataReaderCacheStatus::virtual_duplicate_dropped_sample_count |
The number of virtual duplicate samples dropped by the DataReader. A sample is a virtual duplicate if it has the same identity (Virtual Writer GUID and Virtual Sequence Number) as a previously received sample.
When two DataWriters with the same logical data source publish a sample with the same sequence_number, one sample will be dropped and the other will be received by the DataReader.
This can happen when multiple writers are writing on behalf of the same original DataWriter: for example, in systems with redundant Routing Services or when a DataReader is receiving samples both directly from the original DataWriter and from an instance of Persistence Service.
| DDS_LongLong DDS_DataReaderCacheStatus::replaced_dropped_sample_count |
The number of samples replaced by the DataReader due to DDS_KEEP_LAST_HISTORY_QOS replacement.
When the number of samples for an instance in the queue reaches the DDS_HistoryQosPolicy::depth value, a new sample for the instance will replace the oldest sample for the instance in the queue.
The new sample will be accepted and the old sample will be dropped.
This counter will only be updated if the replaced sample's DDS_SampleStateKind was DDS_NOT_READ_SAMPLE_STATE.
| DDS_LongLong DDS_DataReaderCacheStatus::writer_removed_batch_sample_dropped_sample_count |
The number of batch samples received by the DataReader that were marked as removed by the DataWriter.
When the DataReader receives a batch, the batch can contain samples marked as removed by the DataWriter. Examples of removed samples in a batch could be because of sample replacement due to DDS_KEEP_LAST_HISTORY_QOS DDS_HistoryQosPolicy QoS on the DataWriter or because the duration in DDS_LifespanQosPolicy was reached. By default, any sample marked as removed from a batch is dropped (unless you set the dds.data_reader.accept_writer_removed_batch_samples property in the DDS_PropertyQosPolicy to true). Note: Historical data with removed batch samples written before the DataReader joined the DDS domain will also be included in the count.
| DDS_LongLong DDS_DataReaderCacheStatus::total_samples_dropped_by_instance_replacement |
The number of samples with sample state DDS_NOT_READ_SAMPLE_STATE that were dropped when removing an instance due to instance replacement. See DDS_DataReaderResourceLimitsQosPolicy::instance_replacement for more details about when instances are replaced.
| DDS_LongLong DDS_DataReaderCacheStatus::alive_instance_count |
The number of instances in the DataReader's queue with an instance state equal to DDS_ALIVE_INSTANCE_STATE.
| DDS_LongLong DDS_DataReaderCacheStatus::alive_instance_count_peak |
The highest value of DDS_DataReaderCacheStatus::alive_instance_count over the lifetime of the DataReader.
| DDS_LongLong DDS_DataReaderCacheStatus::no_writers_instance_count |
The number of instances in the DataReader's queue with an instance state equal to DDS_NOT_ALIVE_NO_WRITERS_INSTANCE_STATE.
| DDS_LongLong DDS_DataReaderCacheStatus::no_writers_instance_count_peak |
The highest value of DDS_DataReaderCacheStatus::no_writers_instance_count over the lifetime of the DataReader.
| DDS_LongLong DDS_DataReaderCacheStatus::disposed_instance_count |
The number of instances in the DataReader's queue with an instance state equal to DDS_NOT_ALIVE_DISPOSED_INSTANCE_STATE.
| DDS_LongLong DDS_DataReaderCacheStatus::disposed_instance_count_peak |
The highest value of DDS_DataReaderCacheStatus::disposed_instance_count over the lifetime of the DataReader.
| DDS_LongLong DDS_DataReaderCacheStatus::detached_instance_count |
The number of minimal instance states currently being maintained in the DataReader's queue.
If DDS_DataReaderResourceLimitsQosPolicy::keep_minimum_state_for_instances is true, the DataReader will keep up to a maximum of DDS_DataReaderResourceLimitsQosPolicy::max_total_instances detached instances in its queue. For a more in-depth description of detached instances, refer to DDS_DataReaderResourceLimitsQosPolicy::max_total_instances.
| DDS_LongLong DDS_DataReaderCacheStatus::detached_instance_count_peak |
The highest value of DDS_DataReaderCacheStatus::detached_instance_count over the lifetime of the DataReader.
| DDS_LongLong DDS_DataReaderCacheStatus::compressed_sample_count |
The number of received compressed samples by a DataWriter.