|
RTI Connext C API Version 7.4.0
|
<<extension>> The status of a reader's internal protocol related metrics, like the number of samples received, filtered, rejected; and status of wire protocol traffic. More...
Data Fields | |
| DDS_LongLong | received_sample_count |
| The number of samples received by a DataReader. More... | |
| DDS_LongLong | received_sample_count_change |
| The change in DDS_DataReaderProtocolStatus::received_sample_count since the last time the status was read. More... | |
| DDS_LongLong | received_sample_bytes |
| The number of bytes received by a DataReader. More... | |
| DDS_LongLong | received_sample_bytes_change |
| The change in DDS_DataReaderProtocolStatus::received_sample_bytes since the last time the status was read. More... | |
| DDS_LongLong | duplicate_sample_count |
| The number of samples from a remote DataWriter received, not for the first time, by a local DataReader. More... | |
| DDS_LongLong | duplicate_sample_count_change |
| The change in DDS_DataReaderProtocolStatus::duplicate_sample_count since the last time the status was read. More... | |
| DDS_LongLong | duplicate_sample_bytes |
| The number of bytes of samples from a remote DataWriter received, not for the first time, by a local DataReader. More... | |
| DDS_LongLong | duplicate_sample_bytes_change |
| The change in DDS_DataReaderProtocolStatus::duplicate_sample_bytes since the last time the status was read. More... | |
| DDS_LongLong | filtered_sample_count |
| [DEPRECATED]. See: DDS_DataReaderCacheStatus::time_based_filter_dropped_sample_count DDS_DataReaderCacheStatus::content_filter_dropped_sample_count More... | |
| DDS_LongLong | filtered_sample_count_change |
| [DEPRECATED]. See: DDS_DataReaderCacheStatus::time_based_filter_dropped_sample_count DDS_DataReaderCacheStatus::content_filter_dropped_sample_count More... | |
| DDS_LongLong | filtered_sample_bytes |
| [DEPRECATED]. See: DDS_DataReaderCacheStatus::time_based_filter_dropped_sample_count DDS_DataReaderCacheStatus::content_filter_dropped_sample_count More... | |
| DDS_LongLong | filtered_sample_bytes_change |
| [DEPRECATED]. See: DDS_DataReaderCacheStatus::time_based_filter_dropped_sample_count DDS_DataReaderCacheStatus::content_filter_dropped_sample_count More... | |
| DDS_LongLong | received_heartbeat_count |
| The number of Heartbeats from a remote DataWriter received by a local DataReader. More... | |
| DDS_LongLong | received_heartbeat_count_change |
| The change in DDS_DataReaderProtocolStatus::received_heartbeat_count since the last time the status was read. More... | |
| DDS_LongLong | received_heartbeat_bytes |
| The number of bytes of Heartbeats from a remote DataWriter received by a local DataReader. More... | |
| DDS_LongLong | received_heartbeat_bytes_change |
| The change in DDS_DataReaderProtocolStatus::received_heartbeat_bytes since the last time the status was read. More... | |
| DDS_LongLong | sent_ack_count |
| The number of ACKs sent from a local DataReader to a matching remote DataWriter. More... | |
| DDS_LongLong | sent_ack_count_change |
| The change in DDS_DataReaderProtocolStatus::sent_ack_count since the last time the status was read. More... | |
| DDS_LongLong | sent_ack_bytes |
| The number of bytes of ACKs sent from a local DataReader to a matching remote DataWriter. More... | |
| DDS_LongLong | sent_ack_bytes_change |
| The change in DDS_DataReaderProtocolStatus::sent_ack_bytes since the last time the status was read. More... | |
| DDS_LongLong | sent_nack_count |
| The number of NACKs sent from a local DataReader to a matching remote DataWriter. More... | |
| DDS_LongLong | sent_nack_count_change |
| The change in DDS_DataReaderProtocolStatus::sent_nack_count since the last time the status was read. More... | |
| DDS_LongLong | sent_nack_bytes |
| The number of bytes of NACKs sent from a local DataReader to a matching remote DataWriter. More... | |
| DDS_LongLong | sent_nack_bytes_change |
| The change in DDS_DataReaderProtocolStatus::sent_nack_bytes since the last time the status was read. More... | |
| DDS_LongLong | received_gap_count |
| The number of GAPs received from remote DataWriter to this DataReader. More... | |
| DDS_LongLong | received_gap_count_change |
| The change in DDS_DataReaderProtocolStatus::received_gap_count since the last time the status was read. More... | |
| DDS_LongLong | received_gap_bytes |
| The number of bytes of GAPs received from remote DataWriter to this DataReader. More... | |
| DDS_LongLong | received_gap_bytes_change |
| The change in DDS_DataReaderProtocolStatus::received_gap_bytes since the last time the status was read. More... | |
| DDS_LongLong | rejected_sample_count |
| The number of times a sample is rejected because it cannot be accepted by a reliable DataReader. More... | |
| DDS_LongLong | rejected_sample_count_change |
| The change in DDS_DataReaderProtocolStatus::rejected_sample_count since the last time the status was read. More... | |
| struct DDS_SequenceNumber_t | first_available_sample_sequence_number |
| Sequence number of the first available sample in a matched DataWriters reliability queue. More... | |
| struct DDS_SequenceNumber_t | last_available_sample_sequence_number |
| Sequence number of the last available sample in a matched Datawriter's reliability queue. More... | |
| struct DDS_SequenceNumber_t | last_committed_sample_sequence_number |
| Sequence number of the newest sample received from the matched DataWriter committed to the DataReader's queue. More... | |
| DDS_Long | uncommitted_sample_count |
| Number of received samples that are not yet available to be read or taken, due to being received out of order. More... | |
| DDS_LongLong | out_of_range_rejected_sample_count |
| The number of samples dropped by the DataReader due to received window is full and the sample is out-of-order. More... | |
| DDS_LongLong | received_fragment_count |
| The number of DATA_FRAG messages that have been received by this DataReader. More... | |
| DDS_LongLong | dropped_fragment_count |
| The number of DATA_FRAG messages that have been dropped by a DataReader. More... | |
| DDS_LongLong | reassembled_sample_count |
| The number of fragmented samples that have been reassembled by a DataReader. More... | |
| DDS_LongLong | sent_nack_fragment_count |
| The number of NACK fragments that have been sent from a DataReader to a DataWriter. More... | |
| DDS_LongLong | sent_nack_fragment_bytes |
| The number of NACK fragment bytes that have been sent from a DataReader to a DataWriter. More... | |
<<extension>> The status of a reader's internal protocol related metrics, like the number of samples received, filtered, rejected; and status of wire protocol traffic.
| DDS_LongLong DDS_DataReaderProtocolStatus::received_sample_count |
The number of samples received by a DataReader.
Depending on how the DDS_DataReaderProtocolStatus was obtained this may count samples coming from a specific DataWriter or from all the DataWriters that are matched with the DataReader.
If the DDS_DataReaderProtocolStatus is obtained using the DDS_DataReader_get_datareader_protocol_status operation then it will count samples from any DataWriter. If the DataReaderProtocolStatus is obtained using the DDS_DataReader_get_matched_publication_datareader_protocol_status then it will count the samples for the DataWriter specified as a parameter to the function.
Duplicate samples arriving from the DataWriter(s) (e.g. via multiple network paths) are detected prior to increasing this counter. The duplicate samples are counted by DDS_DataReaderProtocolStatus::duplicate_sample_count.
If the DataReader has specified a ContentFilter the received samples that do not pass the filter are part of this counter. The filtered samples are counted by DDS_DataReaderProtocolStatus::filtered_sample_count.
Samples rejected because they do not fit on the DataReader Queue are also part of this counter.
Note the received_sample_count counts samples received from all DataWriters and it does not necessarily match the number of samples accepted into the DataReader Queue. This is because:
Note that when data is fragmented, this statistic is updated when all of the fragments required to reassemble a sample are received, not when individual fragments are received.
| DDS_LongLong DDS_DataReaderProtocolStatus::received_sample_count_change |
The change in DDS_DataReaderProtocolStatus::received_sample_count since the last time the status was read.
Note that when data is fragmented, this statistic is updated when all of the fragments required to reassemble a sample are received, not when individual fragments are received.
| DDS_LongLong DDS_DataReaderProtocolStatus::received_sample_bytes |
The number of bytes received by a DataReader.
Note that when data is fragmented, this statistic is updated upon the receipt of each fragment, not when a sample is reassembled.
| DDS_LongLong DDS_DataReaderProtocolStatus::received_sample_bytes_change |
The change in DDS_DataReaderProtocolStatus::received_sample_bytes since the last time the status was read.
Note that when data is fragmented, this statistic is updated upon the receipt of each fragment, not when a sample is reassembled.
| DDS_LongLong DDS_DataReaderProtocolStatus::duplicate_sample_count |
The number of samples from a remote DataWriter received, not for the first time, by a local DataReader.
Such samples can be redundant, out-of-order, etc. and are not stored in the reader's queue.
| DDS_LongLong DDS_DataReaderProtocolStatus::duplicate_sample_count_change |
The change in DDS_DataReaderProtocolStatus::duplicate_sample_count since the last time the status was read.
Such samples can be redundant, out-of-order, etc. and are not stored in the reader's queue.
| DDS_LongLong DDS_DataReaderProtocolStatus::duplicate_sample_bytes |
The number of bytes of samples from a remote DataWriter received, not for the first time, by a local DataReader.
Such samples can be redundant, out-of-order, etc. and are not stored in the reader's queue.
| DDS_LongLong DDS_DataReaderProtocolStatus::duplicate_sample_bytes_change |
The change in DDS_DataReaderProtocolStatus::duplicate_sample_bytes since the last time the status was read.
Such samples can be redundant, out-of-order, etc. and are not stored in the reader's queue.
| DDS_LongLong DDS_DataReaderProtocolStatus::filtered_sample_count |
| DDS_LongLong DDS_DataReaderProtocolStatus::filtered_sample_count_change |
| DDS_LongLong DDS_DataReaderProtocolStatus::filtered_sample_bytes |
| DDS_LongLong DDS_DataReaderProtocolStatus::filtered_sample_bytes_change |
| DDS_LongLong DDS_DataReaderProtocolStatus::received_heartbeat_count |
The number of Heartbeats from a remote DataWriter received by a local DataReader.
| DDS_LongLong DDS_DataReaderProtocolStatus::received_heartbeat_count_change |
The change in DDS_DataReaderProtocolStatus::received_heartbeat_count since the last time the status was read.
| DDS_LongLong DDS_DataReaderProtocolStatus::received_heartbeat_bytes |
The number of bytes of Heartbeats from a remote DataWriter received by a local DataReader.
| DDS_LongLong DDS_DataReaderProtocolStatus::received_heartbeat_bytes_change |
The change in DDS_DataReaderProtocolStatus::received_heartbeat_bytes since the last time the status was read.
| DDS_LongLong DDS_DataReaderProtocolStatus::sent_ack_count |
The number of ACKs sent from a local DataReader to a matching remote DataWriter.
| DDS_LongLong DDS_DataReaderProtocolStatus::sent_ack_count_change |
The change in DDS_DataReaderProtocolStatus::sent_ack_count since the last time the status was read.
| DDS_LongLong DDS_DataReaderProtocolStatus::sent_ack_bytes |
The number of bytes of ACKs sent from a local DataReader to a matching remote DataWriter.
| DDS_LongLong DDS_DataReaderProtocolStatus::sent_ack_bytes_change |
The change in DDS_DataReaderProtocolStatus::sent_ack_bytes since the last time the status was read.
| DDS_LongLong DDS_DataReaderProtocolStatus::sent_nack_count |
The number of NACKs sent from a local DataReader to a matching remote DataWriter.
| DDS_LongLong DDS_DataReaderProtocolStatus::sent_nack_count_change |
The change in DDS_DataReaderProtocolStatus::sent_nack_count since the last time the status was read.
| DDS_LongLong DDS_DataReaderProtocolStatus::sent_nack_bytes |
The number of bytes of NACKs sent from a local DataReader to a matching remote DataWriter.
| DDS_LongLong DDS_DataReaderProtocolStatus::sent_nack_bytes_change |
The change in DDS_DataReaderProtocolStatus::sent_nack_bytes since the last time the status was read.
| DDS_LongLong DDS_DataReaderProtocolStatus::received_gap_count |
The number of GAPs received from remote DataWriter to this DataReader.
| DDS_LongLong DDS_DataReaderProtocolStatus::received_gap_count_change |
The change in DDS_DataReaderProtocolStatus::received_gap_count since the last time the status was read.
| DDS_LongLong DDS_DataReaderProtocolStatus::received_gap_bytes |
The number of bytes of GAPs received from remote DataWriter to this DataReader.
| DDS_LongLong DDS_DataReaderProtocolStatus::received_gap_bytes_change |
The change in DDS_DataReaderProtocolStatus::received_gap_bytes since the last time the status was read.
| DDS_LongLong DDS_DataReaderProtocolStatus::rejected_sample_count |
The number of times a sample is rejected because it cannot be accepted by a reliable DataReader.
Samples rejected by a reliable DataReader will be NACKed, and they will have to be resent by the DataWriter if they are still available in the DataWriter queue.
This counter will always be 0 when using DDS_BEST_EFFORT_RELIABILITY_QOS.
| DDS_LongLong DDS_DataReaderProtocolStatus::rejected_sample_count_change |
The change in DDS_DataReaderProtocolStatus::rejected_sample_count since the last time the status was read.
This counter will always be 0 when using DDS_BEST_EFFORT_RELIABILITY_QOS.
| struct DDS_SequenceNumber_t DDS_DataReaderProtocolStatus::first_available_sample_sequence_number |
Sequence number of the first available sample in a matched DataWriters reliability queue.
Applicable only for reliable DataReaders, and when retrieving matched DataWriter statuses.
Updated upon receiving Heartbeat submessages from a matched reliable DataWriter.
| struct DDS_SequenceNumber_t DDS_DataReaderProtocolStatus::last_available_sample_sequence_number |
Sequence number of the last available sample in a matched Datawriter's reliability queue.
Applicable only for reliable DataReaders, and when retrieving matched DataWriter statuses.
Updated upon receiving Heartbeat submessages from a matched reliable DataWriter.
| struct DDS_SequenceNumber_t DDS_DataReaderProtocolStatus::last_committed_sample_sequence_number |
Sequence number of the newest sample received from the matched DataWriter committed to the DataReader's queue.
Applicable only when retrieving matched DataWriter statuses.
For best-effort DataReaders, this is the sequence number of the latest sample received.
For reliable DataReaders, this is the sequence number of the latest sample that is available to be read or taken from the DataReader's queue.
| DDS_Long DDS_DataReaderProtocolStatus::uncommitted_sample_count |
Number of received samples that are not yet available to be read or taken, due to being received out of order.
Applicable only when retrieving matched DataWriter statuses.
| DDS_LongLong DDS_DataReaderProtocolStatus::out_of_range_rejected_sample_count |
The number of samples dropped by the DataReader due to received window is full and the sample is out-of-order.
When using DDS_RELIABLE_RELIABILITY_QOS; if the DataReader received samples out-of-order, they are stored internally until the missing samples are received. The number of out-of-order samples that the DataReader can keep is set by DDS_RtpsReliableReaderProtocol_t::receive_window_size. When the received window is full any out-of-order sample received will be dropped.
| DDS_LongLong DDS_DataReaderProtocolStatus::received_fragment_count |
The number of DATA_FRAG messages that have been received by this DataReader.
This statistic is incremented upon the receipt of each DATA_FRAG message. Fragments from duplicate samples do not count towards this statistic. Applicable only when data is fragmented.
| DDS_LongLong DDS_DataReaderProtocolStatus::dropped_fragment_count |
The number of DATA_FRAG messages that have been dropped by a DataReader.
This statistic does not include malformed fragments. Applicable only when data is fragmented.
| DDS_LongLong DDS_DataReaderProtocolStatus::reassembled_sample_count |
The number of fragmented samples that have been reassembled by a DataReader.
This statistic is incremented when all of the fragments which are required to reassemble an entire sample have been received. Applicable only when data is fragmented.
| DDS_LongLong DDS_DataReaderProtocolStatus::sent_nack_fragment_count |
The number of NACK fragments that have been sent from a DataReader to a DataWriter.
NACK FRAG RTPS messages are sent when large data is used in conjunction with reliable communication. They have the same properties as NACK messages, but instead of applying to samples, they apply to fragments. Applicable only when data is fragmented.
| DDS_LongLong DDS_DataReaderProtocolStatus::sent_nack_fragment_bytes |
The number of NACK fragment bytes that have been sent from a DataReader to a DataWriter.
NACK FRAG RTPS messages are sent when large data is used in conjunction with reliable communication. They have the same properties as NACK messages, but instead of applying to samples, they apply to fragments. Applicable only when data is fragmented.