5. Building and Porting Connext DDS Micro

• 5.1. RTI Connext DDS Micro Supported Platforms
  • 5.1.1. Reference Platforms
  • 5.1.2. Known Customer Platforms
• 5.2. Building the Connext DDS Micro Source
  • 5.2.1. Introduction
  • 5.2.2. The Host and Target Environment
  • 5.2.3. Overview of the Connext DDS Micro Source
  • 5.2.4. Compiling Connext DDS Micro
  • 5.2.5. Connext DDS Micro Compile Options
  • 5.2.6. Cross-Compiling Connext DDS Micro
  • 5.2.7. Custom Build Environments
• 5.3. Compiling the Connext DDS Micro Source for QNX™
  • 5.3.1. Introduction
  • 5.3.2. Build environment
  • 5.3.3. Compiling with rtime-make
  • 5.3.4. Required QNX kernel configuration
• 5.4. Building the Connext DDS Micro Source for FreeRTOS
  • 5.4.1. Introduction
  • 5.4.2. Overview
  • 5.4.3. Configuration
  • 5.4.4. CMake Support
• 5.5. Building the Connext DDS Micro Source for ThreadX
  • 5.5.1. Introduction
  • 5.5.2. Overview
  • 5.5.3. Configuration
  • 5.5.4. CMake Support
• 5.6. Compiling the Connext DDS Micro Source for AUTOSAR
  • 5.6.1. Introduction
  • 5.6.2. AUTOSAR Configuration
  • 5.6.3. AUTOSAR Port Details
  • 5.6.4. Compiling
  • 5.6.5. Interoperability

• 5.7. Porting RTI Connext DDS Micro
  • 5.7.1. Updating from Connext DDS Micro 2.4.8 and earlier
  • 5.7.2. Directory Structure
  • 5.7.3. OS and CC Definition Files
  • 5.7.4. Heap Porting Guide
  • 5.7.5. Mutex Porting Guide
  • 5.7.6. Semaphore Porting Guide
  • 5.7.7. Process Porting Guide
  • 5.7.8. System Porting Guide
    • 5.7.8.1. Migrating a 2.2.x port to 2.3.x
  • 5.7.9. Thread Porting Guide
• 5.8. Port Validation
  • 5.8.1. Introduction
  • 5.8.2. Overview
  • 5.8.3. Building the Port Validation Tests
    • 5.8.3.1. Building with rtime-make
    • 5.8.3.2. Manually building with CMake
    • 5.8.3.3. Custom Build Environments
  • 5.8.4. Running the Tests
    • 5.8.4.1. Setting Up a Config File
    • 5.8.4.2. Running the tests using a configuration file
      • 5.8.4.2.1. Running the tests on platforms without a file system
    • 5.8.4.3. Test Results
    • 5.8.4.4. Troubleshooting
  • 5.8.5. Embedded Platforms
    • 5.8.5.1. AUTOSAR Systems
    • 5.8.5.2. FreeRTOS Systems
  • 5.8.6. Porting UTEST
• 5.9. Building Connext DDS Micro with compatibility for Connext DDS Micro Cert