<<cert>> Specifies the wire-protocol-related attributes for the DDSDomainParticipant. More...

Public Attributes
DDS_Long	participant_id
	A value used to distinguish between different participants belonging to the same domain on the same host.
DDS_UnsignedLong	rtps_host_id
	The RTPS Host ID of the domain participant.
DDS_UnsignedLong	rtps_app_id
	The RTPS App ID of the domain participant.
DDS_UnsignedLong	rtps_instance_id
	The RTPS Instance ID of the domain participant.
struct DDS_RtpsWellKnownPorts_t	rtps_well_known_ports
	Configures the RTPS well-known port mappings.
DDS_Boolean	compute_crc
	Adds RTPS checksum submessage to every message when this field is set to DDS_BOOLEAN_TRUE.
DDS_Boolean	check_crc
	Checks if the received RTPS message is valid by comparing the computed checksum with the received RTPS checksum submessage when this field is set to DDS_BOOLEAN_TRUE.
DDS_Boolean	require_crc
	Require that discovered participants send one of the checksums enabled in DDS_WireProtocolQosPolicy::allowed_crc_mask.
DDS_ChecksumKind_t	computed_crc_kind
	A bitmask indicating which checksum is used for sent messages when compute_crc is DDS_BOOLEAN_TRUE. Only one mask is supported.
DDS_ChecksumKindMask_t	allowed_crc_mask
	The checksums which are enabled for validating incoming packets.

Detailed Description

<<cert>> Specifies the wire-protocol-related attributes for the DDSDomainParticipant.

Entity:: DDSDomainParticipant

Properties:: RxO = N/A
Changeable = NO

Usage

The default Qos policies returned by RTI Connext Micro contain the correctly initialized wire protocol attributes.

The defaults are not expected to be modified normally, but are available to the advanced user customizing the implementation behavior.

The default values should not be modified without an understanding of the underlying Real-Time Publish Subscribe (RTPS) wire protocol.

Member Data Documentation

DDS_Long DDS_WireProtocolQosPolicy::participant_id

A value used to distinguish between different participants belonging to the same domain on the same host.

Determines the unicast port on which meta-traffic is received. Also defines the default unicast port for receiving user-traffic for DataReaders and DataWriters .

For more information on port mapping, please refer to DDS_RtpsWellKnownPorts_t.

Each DDSDomainParticipant in the same domain, running on the same host, must have a unique participant_id. The participants may be in the same address space or in distinct address spaces.

A negative number (-1) means that RTI Connext Micro will automatically resolve the participant ID as follows.

RTI Connext Micro will pick the smallest participant ID, based on the unicast ports available on the transports enabled for discovery.

RTI Connext Micro will attempt to resolve an automatic port index either when a DomainPartcipant is enabled, or when a DataReader or a DataWriter is created. Therefore, all the transports enabled for discovery must have been registered by this time. Otherwise, the discovery transports registered after resolving the automatic port index may produce port conflicts when the DomainPartcipant is enabled.

[default] -1 [automatic], i.e. RTI Connext Micro will automatically pick the participant_id, as described above.

[range] [>= 0], or -1, and does not violate guidelines stated in DDS_RtpsWellKnownPorts_t.

See also:: DDSEntity::enable()

DDS_UnsignedLong DDS_WireProtocolQosPolicy::rtps_host_id

The RTPS Host ID of the domain participant.

Either all of DDS_WireProtocolQosPolicy::rtps_host_id, DDS_WireProtocolQosPolicy::rtps_app_id, and DDS_WireProtocolQosPolicy::rtps_instance_id for a DomainParticipant are set to DDS_RTPS_AUTO_ID, or none of them are set to DDS_RTPS_AUTO_ID.

[default] DDS_RTPS_AUTO_ID.

[range] [0,0xffffffff]

DDS_UnsignedLong DDS_WireProtocolQosPolicy::rtps_app_id

The RTPS App ID of the domain participant.

Either all of DDS_WireProtocolQosPolicy::rtps_host_id, DDS_WireProtocolQosPolicy::rtps_app_id, and DDS_WireProtocolQosPolicy::rtps_instance_id for a DomainParticipant are set to DDS_RTPS_AUTO_ID, or none of them are set to DDS_RTPS_AUTO_ID.

[default] DDS_RTPS_AUTO_ID.

[range] [0,0xffffffff]

DDS_UnsignedLong DDS_WireProtocolQosPolicy::rtps_instance_id

The RTPS Instance ID of the domain participant.

Either all of DDS_WireProtocolQosPolicy::rtps_host_id, DDS_WireProtocolQosPolicy::rtps_app_id, and DDS_WireProtocolQosPolicy::rtps_instance_id for a DomainParticipant are set to DDS_RTPS_AUTO_ID, or none of them are set to DDS_RTPS_AUTO_ID.

[default] DDS_RTPS_AUTO_ID.

[range] [0,0xffffffff]

struct DDS_RtpsWellKnownPorts_t DDS_WireProtocolQosPolicy::rtps_well_known_ports

Configures the RTPS well-known port mappings.

Determines the well-known multicast and unicast port mappings for discovery (meta) traffic and user traffic.

[default] DDS_INTEROPERABLE_RTPS_WELL_KNOWN_PORTS

DDS_Boolean DDS_WireProtocolQosPolicy::compute_crc

Adds RTPS checksum submessage to every message when this field is set to DDS_BOOLEAN_TRUE.

The computed checksum covers the entire RTPS message including the RTPS header itself.

[default] DDS_BOOLEAN_FALSE

DDS_Boolean DDS_WireProtocolQosPolicy::check_crc

Checks if the received RTPS message is valid by comparing the computed checksum with the received RTPS checksum submessage when this field is set to DDS_BOOLEAN_TRUE.

DDS_WireProtocolQosPolicy::compute_crc must be enabled at the publishing application for validating the message at the subscribing application.

If a message is reeived with an invalid checksum, the message is discarded. If no checksum is received or found, the message is accepted but may still be corrupted.

[default] DDS_BOOLEAN_FALSE

DDS_Boolean DDS_WireProtocolQosPolicy::require_crc

Require that discovered participants send one of the checksums enabled in DDS_WireProtocolQosPolicy::allowed_crc_mask.

If an invalid checksum is received, the message is dropped.

if the value is DDS_BOOLEAN_TRUE the participant requires that discovered participants send one of the checksums enabled in DDS_WireProtocolQosPolicy::allowed_crc_mask. If this is not the case the participant is ignored and not matching will take place.

This is a stronger check than idref_WireProtocolQosPolicy_check_crc. If an invalid checksum is received or not found, the message is dropped.

[default] DDS_BOOLEAN_FALSE

DDS_ChecksumKind_t DDS_WireProtocolQosPolicy::computed_crc_kind

A bitmask indicating which checksum is used for sent messages when compute_crc is DDS_BOOLEAN_TRUE. Only one mask is supported.

[default] DDS_CHECKSUM_AUTO.

DDS_ChecksumKindMask_t DDS_WireProtocolQosPolicy::allowed_crc_mask

The checksums which are enabled for validating incoming packets.

The following bitmask can be OR'ed for all enabled checksums:

Note that the selected checksums must be a subset of what is supported. If a bitmask that is not supported is selected participant creation will fail.

[default] DDS_CHECKSUM_AUTO.

Public Attributes

Detailed Description

Usage

Member Data Documentation