RTI Connext .Net APIs  Version 5.1.0
DDS::DataWriter Class Reference

<<interface>> Allows an application to set the value of the data to be published under a given DDS::Topic. More...

#include <managed_publication.h>

Inheritance diagram for DDS::DataWriter:
DDS::DomainEntity DDS::Entity DDS::TypedDataWriter< T > DDS::TypedDataWriter< Bytes^  > DDS::TypedDataWriter< DynamicData^  > DDS::TypedDataWriter< Foo^  > DDS::TypedDataWriter< KeyedBytes^  > DDS::TypedDataWriter< KeyedString^  > DDS::TypedDataWriter< StringWrapper^  > DDS::BytesDataWriter DDS::DynamicDataWriter DDS::KeyedBytesDataWriter DDS::KeyedStringDataWriter DDS::StringDataWriter FooDataWriter FooDataWriter

Public Member Functions

void get_liveliness_lost_status (LivelinessLostStatus% status)
 Accesses the ::DDS::StatusKind::LIVELINESS_LOST_STATUS communication status.
 
void get_offered_deadline_missed_status (OfferedDeadlineMissedStatus% status)
 Accesses the ::DDS::StatusKind::OFFERED_DEADLINE_MISSED_STATUS communication status.
 
void get_offered_incompatible_qos_status (OfferedIncompatibleQosStatus^ status)
 Accesses the ::DDS::StatusKind::OFFERED_INCOMPATIBLE_QOS_STATUS communication status.
 
void get_publication_matched_status (PublicationMatchedStatus% status)
 Accesses the ::DDS::StatusKind::PUBLICATION_MATCHED_STATUS communication status.
 
void get_reliable_writer_cache_changed_status (ReliableWriterCacheChangedStatus% status)
 <<eXtension>> Get the reliable cache status for this writer.
 
void get_reliable_reader_activity_changed_status (ReliableReaderActivityChangedStatus% status)
 <<eXtension>> Get the reliable reader activity changed status for this writer.
 
virtual void get_datawriter_cache_status (DataWriterCacheStatus% status)
 <<eXtension>> Get the datawriter cache status for this writer.
 
virtual void get_datawriter_protocol_status (DataWriterProtocolStatus% status)
 <<eXtension>> Get the datawriter protocol status for this writer.
 
virtual void get_matched_subscription_datawriter_protocol_status (DataWriterProtocolStatus% status, InstanceHandle_t% subscription_handle)
 <<eXtension>> Get the datawriter protocol status for this writer, per matched subscription identified by the subscription_handle.
 
virtual void get_matched_subscription_datawriter_protocol_status_by_locator (DataWriterProtocolStatus% status, Locator_t^ locator)
 <<eXtension>> Get the datawriter protocol status for this writer, per matched subscription identified by the locator.
 
void assert_liveliness ()
 This operation manually asserts the liveliness of this DDS::DataWriter.
 
virtual void get_matched_subscription_locators (LocatorSeq^ locators)
 <<eXtension>> Retrieve the list of locators for subscriptions currently "associated" with this DDS::DataWriter.
 
void get_matched_subscriptions (InstanceHandleSeq^ subscription_handles)
 Retrieve the list of subscriptions currently "associated" with this DDS::DataWriter.
 
void get_matched_subscription_data (SubscriptionBuiltinTopicData^ subscription_data, InstanceHandle_t% subscription_handle)
 This operation retrieves the information on a subscription that is currently "associated" with the DDS::DataWriter.
 
void get_matched_subscription_participant_data (ParticipantBuiltinTopicData^ participant_data, InstanceHandle_t% subscription_handle)
 This operation retrieves the information on the discovered DDS::DomainParticipant associated with the subscription that is currently matching with the DDS::DataWriter.
 
Topicget_topic ()
 This operation returns the DDS::Topic associated with the DDS::DataWriter.
 
Publisherget_publisher ()
 This operation returns the DDS::Publisher to which the DDS::DataWriter belongs.
 
void wait_for_acknowledgments (Duration_t max_wait)
 Blocks the calling thread until all data written by reliable DDS::DataWriter entity is acknowledged, or until timeout expires.
 
void wait_for_asynchronous_publishing (Duration_t max_wait)
 <<eXtension>> Blocks the calling thread until asynchronous sending is complete.
 
void set_qos (DataWriterQos^ qos)
 Sets the writer QoS.
 
void set_qos_with_profile (System::String^ library_name, System::String^ profile_name)
 <<eXtension>> Change the QoS of this writer using the input XML QoS profile.
 
void get_qos (DataWriterQos^ qos)
 Gets the writer QoS.
 
void set_listener (DataWriterListener^ l, StatusMask mask)
 Sets the writer listener.
 
DataWriterListenerget_listener ()
 Get the writer listener.
 
void flush ()
 <<eXtension>> Flushes the batch in progress in the context of the calling thread.
 
InstanceHandle_t register_instance_untyped (System::Object^ instance_data)
 Register a new instance with this writer.
 
InstanceHandle_t register_instance_w_timestamp_untyped (System::Object^ instance_data, DDS::Time_t% source_timestamp)
 Register a new instance with this writer using the given time instead of the current time.
 
void unregister_instance_untyped (System::Object^ instance_data, DDS::InstanceHandle_t% handle)
 Unregister a new instance from this writer.
 
void unregister_instance_w_timestamp_untyped (System::Object^ instance_data, DDS::InstanceHandle_t% handle, DDS::Time_t% source_timestamp)
 Unregister a new instance from this writer using the given time instead of the current time.
 
void write_untyped (System::Object^ instance_data, DDS::InstanceHandle_t% handle)
 Publish a data sample.
 
void write_w_timestamp_untyped (System::Object^ instance_data, DDS::InstanceHandle_t% handle, DDS::Time_t% source_timestamp)
 Publish a data sample using the given time instead of the current time.
 
void dispose_untyped (System::Object^ instance_data, DDS::InstanceHandle_t% instance_handle)
 Dispose a data sample.
 
void dispose_w_timestamp_untyped (System::Object^ instance_data, DDS::InstanceHandle_t% instance_handle, DDS::Time_t% source_timestamp)
 Dispose a data sample using the given time instead of the current time.
 
void get_key_value_untyped (System::Object^ key_holder, DDS::InstanceHandle_t% handle)
 Fill in the key fields of the given data sample.
 
InstanceHandle_t lookup_instance_untyped (System::Object^ key_holder)
 Given a sample with the given key field values, return the handle corresponding to its instance.
 
virtual void enable () override
 Enables the DDS::Entity.
 
virtual StatusConditionget_statuscondition () override
 Allows access to the DDS::StatusCondition associated with the DDS::Entity.
 
virtual StatusMask get_status_changes () override
 Retrieves the list of communication statuses in the DDS::Entity that are triggered.
 
virtual InstanceHandle_t get_instance_handle () override
 Allows access to the DDS::InstanceHandle_t associated with the DDS::Entity.
 

Detailed Description

<<interface>> Allows an application to set the value of the data to be published under a given DDS::Topic.

QoS:
DDS::DataWriterQos
Status:
::DDS::StatusKind::LIVELINESS_LOST_STATUS, DDS::LivelinessLostStatus;
::DDS::StatusKind::OFFERED_DEADLINE_MISSED_STATUS, DDS::OfferedDeadlineMissedStatus;
::DDS::StatusKind::OFFERED_INCOMPATIBLE_QOS_STATUS, DDS::OfferedIncompatibleQosStatus;
::DDS::StatusKind::PUBLICATION_MATCHED_STATUS, DDS::PublicationMatchedStatus;
::DDS::StatusKind::RELIABLE_READER_ACTIVITY_CHANGED_STATUS, DDS::ReliableReaderActivityChangedStatus;
::DDS::StatusKind::RELIABLE_WRITER_CACHE_CHANGED_STATUS, ::DDS::ReliableWriterCacheChangedStatus<BR>
Listener:
DDS::DataWriterListener

A DDS::DataWriter is attached to exactly one DDS::Publisher, that acts as a factory for it.

A DDS::DataWriter is bound to exactly one DDS::Topic and therefore to exactly one data type. The DDS::Topic must exist prior to the DDS::DataWriter's creation.

DDS::DataWriter is an abstract class. It must be specialized for each particular application data-type (see USER_DATA). The additional methods or functions that must be defined in the auto-generated class for a hypothetical application type Foo are specified in the example type DDS::DataWriter.

The following operations may be called even if the DDS::DataWriter is not enabled. Other operations will fail with DDS::Retcode_NotEnabled if called on a disabled DDS::DataWriter:

Several DDS::DataWriter may operate in different threads. If they share the same DDS::Publisher, the middleware guarantees that its operations are thread-safe.

See Also
DDS::TypedDataWriter
Operations Allowed in Listener Callbacks
Examples:
HelloWorld_publisher.cpp.

Member Function Documentation

void DDS::DataWriter::get_liveliness_lost_status ( LivelinessLostStatus status)

Accesses the ::DDS::StatusKind::LIVELINESS_LOST_STATUS communication status.

This also resets the status so that it is no longer considered changed.

Parameters
status<<inout>> DDS::LivelinessLostStatus to be filled in. Cannot be NULL.
Exceptions
Oneof the Standard Return Codes
void DDS::DataWriter::get_offered_deadline_missed_status ( OfferedDeadlineMissedStatus status)

Accesses the ::DDS::StatusKind::OFFERED_DEADLINE_MISSED_STATUS communication status.

This also resets the status so that it is no longer considered changed.

Parameters
status<<inout>> DDS::OfferedDeadlineMissedStatus to be filled in. Cannot be NULL.
Exceptions
Oneof the Standard Return Codes
void DDS::DataWriter::get_offered_incompatible_qos_status ( OfferedIncompatibleQosStatus status)

Accesses the ::DDS::StatusKind::OFFERED_INCOMPATIBLE_QOS_STATUS communication status.

This also resets the status so that it is no longer considered changed.

Parameters
status<<inout>> DDS::OfferedIncompatibleQosStatus to be filled in. Cannot be NULL.
Exceptions
Oneof the Standard Return Codes
void DDS::DataWriter::get_publication_matched_status ( PublicationMatchedStatus status)

Accesses the ::DDS::StatusKind::PUBLICATION_MATCHED_STATUS communication status.

This also resets the status so that it is no longer considered changed.

Parameters
status<<inout>> DDS::PublicationMatchedStatus to be filled in. Cannot be NULL.
Exceptions
Oneof the Standard Return Codes
void DDS::DataWriter::get_reliable_writer_cache_changed_status ( ReliableWriterCacheChangedStatus status)

<<eXtension>> Get the reliable cache status for this writer.

This also resets the status so that it is no longer considered changed.

Parameters
status<<inout>> DDS::ReliableWriterCacheChangedStatus to be filled in. Cannot be NULL.
Exceptions
Oneof the Standard Return Codes
void DDS::DataWriter::get_reliable_reader_activity_changed_status ( ReliableReaderActivityChangedStatus status)

<<eXtension>> Get the reliable reader activity changed status for this writer.

This also resets the status so that it is no longer considered changed.

Parameters
status<<inout>> DDS::ReliableReaderActivityChangedStatus to be filled in. Cannot be NULL.
Exceptions
Oneof the Standard Return Codes
virtual void DDS::DataWriter::get_datawriter_cache_status ( DataWriterCacheStatus status)
virtual

<<eXtension>> Get the datawriter cache status for this writer.

This also resets the status so that it is no longer considered changed.

Parameters
status<<inout>> DDS::DataWriterCacheStatus to be filled in. Cannot be NULL.
Exceptions
Oneof the Standard Return Codes or DDS::Retcode_NotEnabled.
virtual void DDS::DataWriter::get_datawriter_protocol_status ( DataWriterProtocolStatus status)
virtual

<<eXtension>> Get the datawriter protocol status for this writer.

This also resets the status so that it is no longer considered changed.

Parameters
status<<inout>> DDS::DataWriterProtocolStatus to be filled in. Cannot be NULL.
Exceptions
Oneof the Standard Return Codes or DDS::Retcode_NotEnabled.
virtual void DDS::DataWriter::get_matched_subscription_datawriter_protocol_status ( DataWriterProtocolStatus status,
InstanceHandle_t subscription_handle 
)
virtual

<<eXtension>> Get the datawriter protocol status for this writer, per matched subscription identified by the subscription_handle.

This also resets the status so that it is no longer considered changed.

Note: Status for a remote entity is only kept while the entity is alive. Once a remote entity is no longer alive, its status is deleted.

Parameters
status<<inout>> DDS::DataWriterProtocolStatus to be filled in. Cannot be NULL.
subscription_handle<<in>> Handle to a specific subscription associated with the DDS::DataReader. Cannot be NULL.Must correspond to a subscription currently associated with the DDS::DataWriter.
Exceptions
Oneof the Standard Return Codes or DDS::Retcode_NotEnabled.
virtual void DDS::DataWriter::get_matched_subscription_datawriter_protocol_status_by_locator ( DataWriterProtocolStatus status,
Locator_t locator 
)
virtual

<<eXtension>> Get the datawriter protocol status for this writer, per matched subscription identified by the locator.

This also resets the status so that it is no longer considered changed.

Note: Status for a remote entity is only kept while the entity is alive. Once a remote entity is no longer alive, its status is deleted.

Parameters
status<<inout>> DDS::DataWriterProtocolStatus to be filled in Cannot be NULL.
locator<<in>> Locator to a specific locator associated with the DDS::DataReader. Cannot be NULL.Must correspond to a locator of one or more subscriptions currently associated with the DDS::DataWriter.
Exceptions
Oneof the Standard Return Codes or DDS::Retcode_NotEnabled.
void DDS::DataWriter::assert_liveliness ( )

This operation manually asserts the liveliness of this DDS::DataWriter.

This is used in combination with the LIVELINESS policy to indicate to RTI Connext that the DDS::DataWriter remains active.

You only need to use this operation if the LIVELINESS setting is either ::DDS::LivelinessQosPolicyKind::MANUAL_BY_PARTICIPANT_LIVELINESS_QOS or ::DDS::LivelinessQosPolicyKind::MANUAL_BY_TOPIC_LIVELINESS_QOS. Otherwise, it has no effect.

Note: writing data via the DDS::TypedDataWriter::write or DDS::TypedDataWriter::write_w_timestamp operation asserts liveliness on the DDS::DataWriter itself, and its DDS::DomainParticipant. Consequently the use of assert_liveliness() is only needed if the application is not writing data regularly.

Exceptions
Oneof the Standard Return Codes or DDS::Retcode_NotEnabled
See Also
DDS::LivelinessQosPolicy
virtual void DDS::DataWriter::get_matched_subscription_locators ( LocatorSeq locators)
virtual

<<eXtension>> Retrieve the list of locators for subscriptions currently "associated" with this DDS::DataWriter.

Matched subscription locators include locators for all those subscriptions in the same domain that have a matching DDS::Topic, compatible QoS and common partition that the DDS::DomainParticipant has not indicated should be "ignored" by means of the DDS::DomainParticipant::ignore_subscription operation.

The locators returned in the locators list are the ones that are used by the DDS implementation to communicate with the corresponding matched DDS::DataReader entities.

Parameters
locators<<inout>>. Handles of all the matched subscription locators.

The sequence will be grown if the sequence has ownership and the system has the corresponding resources. Use a sequence without ownership to avoid dynamic memory allocation. If the sequence is too small to store all the matches and the system can not resize the sequence, this method will fail with DDS::Retcode_OutOfResources. Cannot be NULL..

Exceptions
Oneof the Standard Return Codes, or DDS::Retcode_OutOfResources if the sequence is too small and the system can not resize it, or DDS::Retcode_NotEnabled
void DDS::DataWriter::get_matched_subscriptions ( InstanceHandleSeq subscription_handles)

Retrieve the list of subscriptions currently "associated" with this DDS::DataWriter.

Matched subscriptions include all those in the same domain that have a matching DDS::Topic, compatible QoS and common partition that the DDS::DomainParticipant has not indicated should be "ignored" by means of the DDS::DomainParticipant::ignore_subscription operation.

The handles returned in the subscription_handles list are the ones that are used by the DDS implementation to locally identify the corresponding matched DDS::DataReader entities. These handles match the ones that appear in the DDS::SampleInfo::instance_handle field of the DDS::SampleInfo when reading the DDS::SubscriptionBuiltinTopicDataTypeSupport::SUBSCRIPTION_TOPIC_NAME builtin topic.

Parameters
subscription_handles<<inout>>. Handles of all the matched subscriptions.

The sequence will be grown if the sequence has ownership and the system has the corresponding resources. Use a sequence without ownership to avoid dynamic memory allocation. If the sequence is too small to store all the matches and the system can not resize the sequence, this method will fail with DDS::Retcode_OutOfResources.

The maximum number of matches possible is configured with DDS::DomainParticipantResourceLimitsQosPolicy. You can use a zero-maximum sequence without ownership to quickly check whether there are any matches without allocating any memory. Cannot be NULL..

Exceptions
Oneof the Standard Return Codes, or DDS::Retcode_OutOfResources if the sequence is too small and the system can not resize it, or DDS::Retcode_NotEnabled
void DDS::DataWriter::get_matched_subscription_data ( SubscriptionBuiltinTopicData subscription_data,
InstanceHandle_t subscription_handle 
)

This operation retrieves the information on a subscription that is currently "associated" with the DDS::DataWriter.

The subscription_handle must correspond to a subscription currently associated with the DDS::DataWriter. Otherwise, the operation will fail and fail with DDS::Retcode_BadParameter. Use DDS::DataWriter::get_matched_subscriptions to find the subscriptions that are currently matched with the DDS::DataWriter.

Note: This operation does not retrieve the following information in DDS::SubscriptionBuiltinTopicData:

The above information is available through DDS::DataReaderListener::on_data_available() (if a reader listener is installed on the DDS::SubscriptionBuiltinTopicDataDataReader).

Parameters
subscription_data<<inout>>. The information to be filled in on the associated subscription. Cannot be NULL.
subscription_handle<<in>>. Handle to a specific subscription associated with the DDS::DataReader. Cannot be NULL.. Must correspond to a subscription currently associated with the DDS::DataWriter.
Exceptions
Oneof the Standard Return Codes, or DDS::Retcode_NotEnabled
void DDS::DataWriter::get_matched_subscription_participant_data ( ParticipantBuiltinTopicData participant_data,
InstanceHandle_t subscription_handle 
)

This operation retrieves the information on the discovered DDS::DomainParticipant associated with the subscription that is currently matching with the DDS::DataWriter.

The subscription_handle must correspond to a subscription currently associated with the DDS::DataWriter. Otherwise, the operation will fail with DDS::Retcode_BadParameter. The operation may also fail with DDS::Retcode_PreconditionNotMet if the subscription corresponds to the same DDS::DomainParticipant that the DataWriter belongs to. Use DDS::DataWriter::get_matched_subscriptions to find the subscriptions that are currently matched with the DDS::DataWriter.

Note: This operation does not retrieve the ::DDS::ParticipantBuiltinTopicData::property.

The above information is available through DDS::DataReaderListener::on_data_available() (if a reader listener is installed on the DDS::SubscriptionBuiltinTopicDataDataReader).

Parameters
participant_data<<inout>>. The information to be filled in on the associated participant Cannot be NULL.
subscription_handle<<in>>. Handle to a specific subscription associated with the DDS::DataReader. Cannot be NULL.. Must correspond to a subscription currently associated with the DDS::DataWriter.
Exceptions
Oneof the Standard Return Codes, or DDS::Retcode_NotEnabled
Topic ^ DDS::DataWriter::get_topic ( )

This operation returns the DDS::Topic associated with the DDS::DataWriter.

This is the same DDS::Topic that was used to create the DDS::DataWriter.

Returns
DDS::Topic that was used to create the DDS::DataWriter.
Publisher ^ DDS::DataWriter::get_publisher ( )

This operation returns the DDS::Publisher to which the DDS::DataWriter belongs.

Returns
DDS::Publisher to which the DDS::DataWriter belongs.
void DDS::DataWriter::wait_for_acknowledgments ( Duration_t  max_wait)

Blocks the calling thread until all data written by reliable DDS::DataWriter entity is acknowledged, or until timeout expires.

This operation blocks the calling thread until either all data written by the reliable DDS::DataWriter entity is acknowledged by (a) all reliable DDS::DataReader entities that are matched and alive and (b) by all required subscriptions, or until the duration specified by the max_wait parameter elapses, whichever happens first. A successful completion indicates that all the samples written have been acknowledged by all reliable matched data readers and by all required subscriptions; a return value of TIMEOUT indicates that max_wait elapsed before all the data was acknowledged.

Note that if a thread is blocked in the call to wait_for_acknowledgments on a DataWriter and a different thread writes new samples on the same DataWriter, the new samples must be acknowledged before unblocking the thread waiting on wait_for_acknowledgments.

If the DDS::DataWriter does not have DDS::ReliabilityQosPolicy kind set to RELIABLE, this operation will complete immediately with RETCODE_OK.

Parameters
max_wait<<in>> Specifies maximum time to wait for acknowledgements DDS::Duration_t .
Exceptions
Oneof the Standard Return Codes, DDS::Retcode_NotEnabled, DDS::Retcode_Timeout
void DDS::DataWriter::wait_for_asynchronous_publishing ( Duration_t  max_wait)

<<eXtension>> Blocks the calling thread until asynchronous sending is complete.

This operation blocks the calling thread (up to max_wait) until all data written by the asynchronous DDS::DataWriter is sent and acknowledged (if reliable) by all matched DDS::DataReader entities. A successful completion indicates that all the samples written have been sent and acknowledged where applicable; a time out indicates that max_wait elapsed before all the data was sent and/or acknowledged.

In other words, this guarantees that sending to best effort DDS::DataReader is complete in addition to what DDS::DataWriter::wait_for_acknowledgments provides.

If the DDS::DataWriter does not have DDS::PublishModeQosPolicy kind set to ::DDS::PublishModeQosPolicyKind::ASYNCHRONOUS_PUBLISH_MODE_QOS the operation will complete immediately with ::DDS::Exception::RETCODE_OK.

Parameters
max_wait<<in>> Specifies maximum time to wait for acknowledgements DDS::Duration_t .
Exceptions
Oneof the Standard Return Codes, DDS::Retcode_NotEnabled, DDS::Retcode_Timeout
void DDS::DataWriter::set_qos ( DataWriterQos qos)

Sets the writer QoS.

This operation modifies the QoS of the DDS::DataWriter.

The DDS::DataWriterQos::user_data, DDS::DataWriterQos::deadline, DDS::DataWriterQos::latency_budget, DDS::DataWriterQos::ownership_strength, DDS::DataWriterQos::transport_priority, DDS::DataWriterQos::lifespan and DDS::DataWriterQos::writer_data_lifecycle can be changed. The other policies are immutable.

Parameters
qos<<in>> The DDS::DataWriterQos to be set to. Policies must be consistent. Immutable policies cannot be changed after DDS::DataWriter is enabled. The special value DDS::Publisher::DATAWRITER_QOS_DEFAULT can be used to indicate that the QoS of the DDS::DataWriter should be changed to match the current default DDS::DataWriterQos set in the DDS::Publisher. Cannot be NULL.
Exceptions
Oneof the Standard Return Codes, DDS::Retcode_ImmutablePolicy or DDS::Retcode_InconsistentPolicy
See Also
DDS::DataWriterQos for rules on consistency among QoS
set_qos (abstract)
Operations Allowed in Listener Callbacks
void DDS::DataWriter::set_qos_with_profile ( System::String^  library_name,
System::String^  profile_name 
)

<<eXtension>> Change the QoS of this writer using the input XML QoS profile.

This operation modifies the QoS of the DDS::DataWriter.

The DDS::DataWriterQos::user_data, DDS::DataWriterQos::deadline, DDS::DataWriterQos::latency_budget, DDS::DataWriterQos::ownership_strength, DDS::DataWriterQos::transport_priority, DDS::DataWriterQos::lifespan and DDS::DataWriterQos::writer_data_lifecycle can be changed. The other policies are immutable.

Parameters
library_name<<in>> Library name containing the XML QoS profile. If library_name is null RTI Connext will use the default library (see DDS::Publisher::set_default_library).
profile_name<<in>> XML QoS Profile name. If profile_name is null RTI Connext will use the default profile (see DDS::Publisher::set_default_profile).
Exceptions
Oneof the Standard Return Codes, DDS::Retcode_ImmutablePolicy or DDS::Retcode_InconsistentPolicy
See Also
DDS::DataWriterQos for rules on consistency among QoS
Operations Allowed in Listener Callbacks
void DDS::DataWriter::get_qos ( DataWriterQos qos)

Gets the writer QoS.

This method may potentially allocate memory depending on the sequences contained in some QoS policies.

Parameters
qos<<inout>> The DDS::DataWriterQos to be filled up. Cannot be NULL.
Exceptions
Oneof the Standard Return Codes
See Also
get_qos (abstract)
void DDS::DataWriter::set_listener ( DataWriterListener l,
StatusMask  mask 
)

Sets the writer listener.

Parameters
l<<in>> DDS::DataWriterListener to set to
mask<<in>> ::DDS::StatusMask associated with the DDS::DataWriterListener.
Exceptions
Oneof the Standard Return Codes
See Also
set_listener (abstract)
DataWriterListener ^ DDS::DataWriter::get_listener ( )

Get the writer listener.

Returns
DDS::DataWriterListener of the DDS::DataWriter.
See Also
get_listener (abstract)
void DDS::DataWriter::flush ( )

<<eXtension>> Flushes the batch in progress in the context of the calling thread.

After being flushed, the batch is available to be sent on the network.

If the DDS::DataWriter does not have DDS::PublishModeQosPolicy kind set to ::DDS::PublishModeQosPolicyKind::ASYNCHRONOUS_PUBLISH_MODE_QOS, the batch will be sent on the network immediately (in the context of the calling thread).

If the DDS::DataWriter does have DDS::PublishModeQosPolicy kind set to ::DDS::PublishModeQosPolicyKind::ASYNCHRONOUS_PUBLISH_MODE_QOS, the batch will be sent in the context of the asynchronous publishing thread.

This operation may block in the same conditions as DDS::TypedDataWriter::write.

If this operation does block, the RELIABILITY max_blocking_time configures the maximum time the write operation may block (waiting for space to become available). If max_blocking_time elapses before the DDS_DataWriter is able to store the modification without exceeding the limits, the operation will fail with DDS_RETCODE_TIMEOUT.

MT Safety:
flush() is only thread-safe with batching if DDS::BatchQosPolicy::thread_safe_write is TRUE.
Exceptions
Oneof the Standard Return Codes, DDS::Retcode_Timeout, DDS::Retcode_OutOfResources or DDS::Retcode_NotEnabled.
InstanceHandle_t DDS::DataWriter::register_instance_untyped ( System::Object^  instance_data)

Register a new instance with this writer.

This method allows type-independent code to work with a variety of concrete DDS::TypedDataWriter classes in a consistent way.

Statically type-safe code should use the appropriate DDS::TypedDataWriter::register_instance method instead of this one. See that method for detailed documentation.

See Also
DDS::DataWriter::unregister_instance_untyped
DDS::TypedDataWriter::register_instance
InstanceHandle_t DDS::DataWriter::register_instance_w_timestamp_untyped ( System::Object^  instance_data,
DDS::Time_t source_timestamp 
)

Register a new instance with this writer using the given time instead of the current time.

This method allows type-independent code to work with a variety of concrete DDS::TypedDataWriter classes in a consistent way.

Statically type-safe code should use the appropriate DDS::TypedDataWriter::register_instance_w_timestamp method instead of this one. See that method for detailed documentation.

See Also
DDS::DataWriter::unregister_instance_w_timestamp_untyped
DDS::TypedDataWriter::register_instance
void DDS::DataWriter::unregister_instance_untyped ( System::Object^  instance_data,
DDS::InstanceHandle_t handle 
)

Unregister a new instance from this writer.

This method allows type-independent code to work with a variety of concrete DDS::TypedDataWriter classes in a consistent way.

Statically type-safe code should use the appropriate DDS::TypedDataWriter::unregister_instance method instead of this one. See that method for detailed documentation.

See Also
DDS::DataWriter::register_instance_untyped
DDS::TypedDataWriter::unregister_instance
void DDS::DataWriter::unregister_instance_w_timestamp_untyped ( System::Object^  instance_data,
DDS::InstanceHandle_t handle,
DDS::Time_t source_timestamp 
)

Unregister a new instance from this writer using the given time instead of the current time.

This method allows type-independent code to work with a variety of concrete DDS::TypedDataWriter classes in a consistent way.

Statically type-safe code should use the appropriate DDS::TypedDataWriter::unregister_instance_w_timestamp method instead of this one. See that method for detailed documentation.

See Also
DDS::DataWriter::register_instance_w_timestamp_untyped
DDS::TypedDataWriter::unregister_instance_w_timestamp
void DDS::DataWriter::write_untyped ( System::Object^  instance_data,
DDS::InstanceHandle_t handle 
)

Publish a data sample.

This method allows type-independent code to work with a variety of concrete DDS::TypedDataWriter classes in a consistent way.

Statically type-safe code should use the appropriate DDS::TypedDataWriter::write method instead of this one. See that method for detailed documentation.

See Also
DDS::DataWriter::write_w_timestamp_untyped
DDS::TypedDataWriter::write
void DDS::DataWriter::write_w_timestamp_untyped ( System::Object^  instance_data,
DDS::InstanceHandle_t handle,
DDS::Time_t source_timestamp 
)

Publish a data sample using the given time instead of the current time.

This method allows type-independent code to work with a variety of concrete DDS::TypedDataWriter classes in a consistent way.

Statically type-safe code should use the appropriate DDS::TypedDataWriter::write_w_timestamp method instead of this one. See that method for detailed documentation.

See Also
DDS::DataWriter::write_untyped
DDS::TypedDataWriter::write_w_timestamp
void DDS::DataWriter::dispose_untyped ( System::Object^  instance_data,
DDS::InstanceHandle_t instance_handle 
)

Dispose a data sample.

This method allows type-independent code to work with a variety of concrete DDS::TypedDataWriter classes in a consistent way.

Statically type-safe code should use the appropriate DDS::TypedDataWriter::dispose method instead of this one. See that method for detailed documentation.

See Also
DDS::DataWriter::dispose_w_timestamp_untyped
DDS::TypedDataWriter::dispose
void DDS::DataWriter::dispose_w_timestamp_untyped ( System::Object^  instance_data,
DDS::InstanceHandle_t instance_handle,
DDS::Time_t source_timestamp 
)

Dispose a data sample using the given time instead of the current time.

This method allows type-independent code to work with a variety of concrete DDS::TypedDataWriter classes in a consistent way.

Statically type-safe code should use the appropriate DDS::TypedDataWriter::dispose_w_timestamp method instead of this one. See that method for detailed documentation.

See Also
DDS::DataWriter::dispose_untyped
DDS::TypedDataWriter::dispose_w_timestamp
void DDS::DataWriter::get_key_value_untyped ( System::Object^  key_holder,
DDS::InstanceHandle_t handle 
)

Fill in the key fields of the given data sample.

This method allows type-independent code to work with a variety of concrete DDS::TypedDataWriter classes in a consistent way.

Statically type-safe code should use the appropriate DDS::TypedDataWriter::get_key_value method instead of this one. See that method for detailed documentation.

See Also
DDS::TypedDataWriter::get_key_value
InstanceHandle_t DDS::DataWriter::lookup_instance_untyped ( System::Object^  key_holder)

Given a sample with the given key field values, return the handle corresponding to its instance.

This method allows type-independent code to work with a variety of concrete DDS::TypedDataWriter classes in a consistent way.

Statically type-safe code should use the appropriate DDS::TypedDataWriter::lookup_instance method instead of this one. See that method for detailed documentation.

See Also
DDS::TypedDataWriter::lookup_instance
virtual void DDS::DataWriter::enable ( )
overridevirtual

Enables the DDS::Entity.

This operation enables the Entity. Entity objects can be created either enabled or disabled. This is controlled by the value of the ENTITY_FACTORY QoS policy on the corresponding factory for the DDS::Entity.

By default, ENTITY_FACTORY is set so that it is not necessary to explicitly call DDS::Entity::enable on newly created entities.

The DDS::Entity::enable operation is idempotent. Calling enable on an already enabled Entity returns OK and has no effect.

If a DDS::Entity has not yet been enabled, the following kinds of operations may be invoked on it:

Other operations may explicitly state that they may be called on disabled entities; those that do not will return the error DDS::Retcode_NotEnabled.

It is legal to delete an DDS::Entity that has not been enabled by calling the proper operation on its factory.

Entities created from a factory that is disabled are created disabled, regardless of the setting of the DDS::EntityFactoryQosPolicy.

Calling enable on an Entity whose factory is not enabled will fail and return DDS::Retcode_PreconditionNotMet.

If DDS::EntityFactoryQosPolicy::autoenable_created_entities is TRUE, the enable operation on a factory will automatically enable all entities created from that factory.

Listeners associated with an entity are not called until the entity is enabled.

Conditions associated with a disabled entity are "inactive," that is, they have a trigger_value == FALSE.

Exceptions
Oneof the Standard Return Codes, Standard Return Codes or DDS::Retcode_PreconditionNotMet.

Implements DDS::Entity.

virtual StatusCondition ^ DDS::DataWriter::get_statuscondition ( )
overridevirtual

Allows access to the DDS::StatusCondition associated with the DDS::Entity.

The returned condition can then be added to a DDS::WaitSet so that the application can wait for specific status changes that affect the DDS::Entity.

Returns
the status condition associated with this entity.

Implements DDS::Entity.

virtual StatusMask DDS::DataWriter::get_status_changes ( )
overridevirtual

Retrieves the list of communication statuses in the DDS::Entity that are triggered.

That is, the list of statuses whose value has changed since the last time the application read the status using the get_*_status() method.

When the entity is first created or if the entity is not enabled, all communication statuses are in the "untriggered" state so the list returned by the get_status_changes operation will be empty.

The list of statuses returned by the get_status_changes operation refers to the status that are triggered on the Entity itself and does not include statuses that apply to contained entities.

Returns
list of communication statuses in the DDS::Entity that are triggered.
See Also
Status Kinds

Implements DDS::Entity.

virtual InstanceHandle_t DDS::DataWriter::get_instance_handle ( )
overridevirtual

Allows access to the DDS::InstanceHandle_t associated with the DDS::Entity.

This operation returns the DDS::InstanceHandle_t that represents the DDS::Entity.

Returns
the instance handle associated with this entity.

Implements DDS::Entity.


RTI Connext .Net APIs Version 5.1.0 Copyright © Mon Feb 3 2014 Real-Time Innovations, Inc