| DDS_AllocationSettings_t | Resource allocation settings |
| DDS_AsynchronousPublisherQosPolicy | Configures the mechanism that sends user data in an external middleware thread |
| DDS_AvailabilityQosPolicy | Configures the availability of data |
| DDS_BatchQosPolicy | Used to configure batching of multiple samples into a single network packet in order to increase throughput for small samples |
| DDS_BooleanSeq | Instantiates FooSeq < DDS_Boolean > |
| DDS_BuiltinTopicKey_t | The key type of the built-in topic types |
| DDS_BuiltinTopicReaderResourceLimits_t | Built-in topic reader's resource limits |
| DDS_ChannelSettings_t | Type used to configure the properties of a channel |
| DDS_ChannelSettingsSeq | Declares IDL sequence< DDS_ChannelSettings_t > |
| DDS_CharSeq | Instantiates FooSeq < DDS_Char > |
| DDS_ContentFilterProperty_t | <<eXtension>> Type used to provide all the required information to enable content filtering |
| DDS_Cookie_t | <<eXtension>> Sequence of bytes identifying a written data sample, used when writing with parameters |
| DDS_DatabaseQosPolicy | Various threads and resource limits settings used by RTI Connext to control its internal database |
| DDS_DataReaderCacheStatus | <<eXtension>> The status of the reader's cache |
| DDS_DataReaderProtocolQosPolicy | Along with DDS_WireProtocolQosPolicy and DDS_DataWriterProtocolQosPolicy, this QoS policy configures the DDS on-the-network protocol (RTPS) |
| DDS_DataReaderProtocolStatus | <<eXtension>> The status of a reader's internal protocol related metrics, like the number of samples received, filtered, rejected; and status of wire protocol traffic |
| DDS_DataReaderQos | QoS policies supported by a DDSDataReader entity |
| DDS_DataReaderResourceLimitsQosPolicy | Various settings that configure how a DDSDataReader allocates and uses physical memory for internal resources |
| DDS_DataWriterCacheStatus | <<eXtension>> The status of the writer's cache |
| DDS_DataWriterProtocolQosPolicy | Protocol that applies only to DDSDataWriter instances |
| DDS_DataWriterProtocolStatus | <<eXtension>> The status of a writer's internal protocol related metrics, like the number of samples pushed, pulled, filtered; and status of wire protocol traffic |
| DDS_DataWriterQos | QoS policies supported by a DDSDataWriter entity |
| DDS_DataWriterResourceLimitsQosPolicy | Various settings that configure how a DDSDataWriter allocates and uses physical memory for internal resources |
| DDS_DeadlineQosPolicy | Expresses the maximum duration (deadline) within which an instance is expected to be updated |
| DDS_DestinationOrderQosPolicy | Controls how the middleware will deal with data sent by multiple DDSDataWriter entities for the same instance of data (i.e., same DDSTopic and key) |
| DDS_DiscoveryConfigQosPolicy | Settings for discovery configuration |
| DDS_DiscoveryQosPolicy | Configures the mechanism used by the middleware to automatically discover and connect with new remote applications |
| DDS_DomainParticipantFactoryQos | QoS policies supported by a DDSDomainParticipantFactory |
| DDS_DomainParticipantQos | QoS policies supported by a DDSDomainParticipant entity |
| DDS_DomainParticipantResourceLimitsQosPolicy | Various settings that configure how a DDSDomainParticipant allocates and uses physical memory for internal resources, including the maximum sizes of various properties |
| DDS_DoubleSeq | Instantiates FooSeq < DDS_Double > |
| DDS_DurabilityQosPolicy | This QoS policy specifies whether or not RTI Connext will store and deliver previously published data samples to new DDSDataReader entities that join the network later |
| DDS_DurabilityServiceQosPolicy | Various settings to configure the external RTI Persistence Service used by RTI Connext for DataWriters with a DDS_DurabilityQosPolicy setting of DDS_PERSISTENT_DURABILITY_QOS or DDS_TRANSIENT_DURABILITY_QOS |
| DDS_Duration_t | Type for duration representation |
| DDS_DynamicData | A sample of any complex data type, which can be inspected and manipulated reflectively |
| DDS_DynamicDataInfo | A descriptor for a DDS_DynamicData object |
| DDS_DynamicDataMemberInfo | A descriptor for a single member (i.e. field) of dynamically defined data type |
| DDS_DynamicDataProperty_t | A collection of attributes used to configure DDS_DynamicData objects |
| DDS_DynamicDataSeq | An ordered collection of DDS_DynamicData elements |
| DDS_DynamicDataTypeProperty_t | A collection of attributes used to configure DDSDynamicDataTypeSupport objects |
| DDS_DynamicDataTypeSerializationProperty_t | Properties that govern how data of a certain type will be serialized on the network |
| DDS_EndpointGroup_t | Specifies a group of endpoints that can be collectively identified by a name and satisfied by a quorum |
| DDS_EndpointGroupSeq | A sequence of DDS_EndpointGroup_t |
| DDS_EntityFactoryQosPolicy | A QoS policy for all DDSEntity types that can act as factories for one or more other DDSEntity types |
| DDS_EntityNameQosPolicy | Assigns a name and a role name to a DDSDomainParticipant, DDSDataWriter or DDSDataReader. These names will be visible during the discovery process and in RTI tools to help you visualize and debug your system |
| DDS_EnumMember | A description of a member of an enumeration |
| DDS_EnumMemberSeq | Defines a sequence of enumerator members |
| DDS_EventQosPolicy | Settings for event |
| DDS_ExclusiveAreaQosPolicy | Configures multi-thread concurrency and deadlock prevention capabilities |
| DDS_FactoryPluginSupport | Interface for creating and manipulating DDS entities |
| DDS_FloatSeq | Instantiates FooSeq < DDS_Float > |
| DDS_FlowControllerProperty_t | Determines the flow control characteristics of the DDSFlowController |
| DDS_FlowControllerTokenBucketProperty_t | DDSFlowController uses the popular token bucket approach for open loop network flow control. The flow control characteristics are determined by the token bucket properties |
| DDS_GroupDataQosPolicy | Attaches a buffer of opaque data that is distributed by means of Built-in Topics during discovery |
| DDS_GUID_t | Type for GUID (Global Unique Identifier) representation |
| DDS_HistoryQosPolicy | Specifies the behavior of RTI Connext in the case where the value of a sample changes (one or more times) before it can be successfully communicated to one or more existing subscribers |
| DDS_InconsistentTopicStatus | DDS_INCONSISTENT_TOPIC_STATUS |
| DDS_InstanceHandleSeq | Instantiates FooSeq < DDS_InstanceHandle_t > |
| DDS_KeyedOctets | Built-in type consisting of a variable-length array of opaque bytes and a string that is the key |
| DDS_KeyedOctetsSeq | Instantiates FooSeq < DDS_KeyedOctets > |
| DDS_KeyedString | Keyed string built-in type |
| DDS_KeyedStringSeq | Instantiates FooSeq < DDS_KeyedString > |
| DDS_LatencyBudgetQosPolicy | Provides a hint as to the maximum acceptable delay from the time the data is written to the time it is received by the subscribing applications |
| DDS_LifespanQosPolicy | Specifies how long the data written by the DDSDataWriter is considered valid |
| DDS_LivelinessChangedStatus | DDS_LIVELINESS_CHANGED_STATUS |
| DDS_LivelinessLostStatus | DDS_LIVELINESS_LOST_STATUS |
| DDS_LivelinessQosPolicy | Specifies and configures the mechanism that allows DDSDataReader entities to detect when DDSDataWriter entities become disconnected or "dead." |
| DDS_Locator_t | <<eXtension>> Type used to represent the addressing information needed to send a message to an RTPS Endpoint using one of the supported transports |
| DDS_LocatorFilter_t | Specifies the configuration of an individual channel within a MultiChannel DataWriter |
| DDS_LocatorFilterQosPolicy | The QoS policy used to report the configuration of a MultiChannel DataWriter as part of DDS_PublicationBuiltinTopicData |
| DDS_LocatorFilterSeq | Declares IDL sequence< DDS_LocatorFilter_t > |
| DDS_LocatorSeq | Declares IDL sequence < DDS_Locator_t > |
| DDS_LoggingQosPolicy | Configures the RTI Connext logging facility |
| DDS_LongDoubleSeq | Instantiates FooSeq < DDS_LongDouble > |
| DDS_LongLongSeq | Instantiates FooSeq < DDS_LongLong > |
| DDS_LongSeq | Instantiates FooSeq < DDS_Long > |
| DDS_MultiChannelQosPolicy | Configures the ability of a DataWriter to send data on different multicast groups (addresses) based on the value of the data |
| DDS_Octets | Built-in type consisting of a variable-length array of opaque bytes |
| DDS_OctetSeq | Instantiates FooSeq < DDS_Octet > |
| DDS_OctetsSeq | Instantiates FooSeq < DDS_Octets > |
| DDS_OfferedDeadlineMissedStatus | DDS_OFFERED_DEADLINE_MISSED_STATUS |
| DDS_OfferedIncompatibleQosStatus | DDS_OFFERED_INCOMPATIBLE_QOS_STATUS |
| DDS_OwnershipQosPolicy | Specifies whether it is allowed for multiple DDSDataWriter (s) to write the same instance of the data and if so, how these modifications should be arbitrated |
| DDS_OwnershipStrengthQosPolicy | Specifies the value of the strength used to arbitrate among multiple DDSDataWriter objects that attempt to modify the same instance of a data type (identified by DDSTopic + key) |
| DDS_ParticipantBuiltinTopicData | Entry created when a DomainParticipant object is discovered |
| DDS_ParticipantBuiltinTopicDataSeq | Instantiates FooSeq < DDS_ParticipantBuiltinTopicData > |
| DDS_PartitionQosPolicy | Set of strings that introduces a logical partition among the topics visible by a DDSPublisher and a DDSSubscriber |
| DDS_PresentationQosPolicy | Specifies how the samples representing changes to data instances are presented to a subscribing application |
| DDS_ProductVersion_t | <<eXtension>> Type used to represent the current version of RTI Connext |
| DDS_ProfileQosPolicy | Configures the way that XML documents containing QoS profiles are loaded by RTI Connext |
| DDS_Property_t | Properties are name/value pairs objects |
| DDS_PropertyQosPolicy | Stores name/value(string) pairs that can be used to configure certain parameters of RTI Connext that are not exposed through formal QoS policies. Can also be used to store and propagate application-specific name/value pairs that can be retrieved by user code during discovery |
| DDS_PropertySeq | Declares IDL sequence < DDS_Property_t > |
| DDS_ProtocolVersion_t | <<eXtension>> Type used to represent the version of the RTPS protocol |
| DDS_PublicationBuiltinTopicData | Entry created when a DDSDataWriter is discovered in association with its Publisher |
| DDS_PublicationBuiltinTopicDataSeq | Instantiates FooSeq < DDS_PublicationBuiltinTopicData > |
| DDS_PublicationMatchedStatus | DDS_PUBLICATION_MATCHED_STATUS |
| DDS_PublisherQos | QoS policies supported by a DDSPublisher entity |
| DDS_PublishModeQosPolicy | Specifies how RTI Connext sends application data on the network. This QoS policy can be used to tell RTI Connext to use its own thread to send data, instead of the user thread |
| DDS_QosPolicyCount | Type to hold a counter for a DDS_QosPolicyId_t |
| DDS_QosPolicyCountSeq | Declares IDL sequence < DDS_QosPolicyCount > |
| DDS_ReaderDataLifecycleQosPolicy | Controls how a DataReader manages the lifecycle of the data that it has received |
| DDS_ReceiverPoolQosPolicy | Configures threads used by RTI Connext to receive and process data from transports (for example, UDP sockets) |
| DDS_ReliabilityQosPolicy | Indicates the level of reliability offered/requested by RTI Connext |
| DDS_ReliableReaderActivityChangedStatus | <<eXtension>> Describes the activity (i.e. are acknowledgements forthcoming) of reliable readers matched to a reliable writer |
| DDS_ReliableWriterCacheChangedStatus | <<eXtension>> A summary of the state of a data writer's cache of unacknowledged samples written |
| DDS_ReliableWriterCacheEventCount | <<eXtension>> The number of times the number of unacknowledged samples in the cache of a reliable writer hit a certain well-defined threshold |
| DDS_RequestedDeadlineMissedStatus | DDS_REQUESTED_DEADLINE_MISSED_STATUS |
| DDS_RequestedIncompatibleQosStatus | DDS_REQUESTED_INCOMPATIBLE_QOS_STATUS |
| DDS_ResourceLimitsQosPolicy | Controls the amount of physical memory allocated for DDS entities, if dynamic allocations are allowed, and how they occur. Also controls memory usage among different instance values for keyed topics |
| DDS_RtpsReliableReaderProtocol_t | Qos related to reliable reader protocol defined in RTPS |
| DDS_RtpsReliableWriterProtocol_t | QoS related to the reliable writer protocol defined in RTPS |
| DDS_RtpsWellKnownPorts_t | RTPS well-known port mapping configuration |
| DDS_SampleIdentity_t | Type definition for an Sample Identity |
| DDS_SampleInfo | Information that accompanies each sample that is read or taken |
| DDS_SampleInfoSeq | Declares IDL sequence < DDS_SampleInfo > |
| DDS_SampleLostStatus | DDS_SAMPLE_LOST_STATUS |
| DDS_SampleRejectedStatus | DDS_SAMPLE_REJECTED_STATUS |
| DDS_SequenceNumber_t | Type for sequence number representation |
| DDS_ShortSeq | Instantiates FooSeq < DDS_Short > |
| DDS_StringSeq | Instantiates FooSeq < char* > with value type semantics |
| DDS_StructMember | A description of a member of a struct |
| DDS_StructMemberSeq | Defines a sequence of struct members |
| DDS_SubscriberQos | QoS policies supported by a DDSSubscriber entity |
| DDS_SubscriptionBuiltinTopicData | Entry created when a DDSDataReader is discovered in association with its Subscriber |
| DDS_SubscriptionBuiltinTopicDataSeq | Instantiates FooSeq < DDS_SubscriptionBuiltinTopicData > |
| DDS_SubscriptionMatchedStatus | DDS_SUBSCRIPTION_MATCHED_STATUS |
| DDS_SystemResourceLimitsQosPolicy | Configures DDSDomainParticipant-independent resources used by RTI Connext. Mainly used to change the maximum number of DDSDomainParticipant entities that can be created within a single process (address space) |
| DDS_ThreadSettings_t | The properties of a thread of execution |
| DDS_Time_t | Type for time representation |
| DDS_TimeBasedFilterQosPolicy | Filter that allows a DDSDataReader to specify that it is interested only in (potentially) a subset of the values of the data |
| DDS_TopicBuiltinTopicData | Entry created when a Topic object discovered |
| DDS_TopicBuiltinTopicDataSeq | Instantiates FooSeq < DDS_TopicBuiltinTopicData > |
| DDS_TopicDataQosPolicy | Attaches a buffer of opaque data that is distributed by means of Built-in Topics during discovery |
| DDS_TopicQos | QoS policies supported by a DDSTopic entity |
| DDS_TransportBuiltinQosPolicy | Specifies which built-in transports are used |
| DDS_TransportMulticastMapping_t | Type representing a list of multicast mapping elements |
| DDS_TransportMulticastMappingFunction_t | Type representing an external mapping function |
| DDS_TransportMulticastMappingQosPolicy | Specifies a list of topic_expressions and multicast addresses that can be used by an Entity with a specific topic name to receive data |
| DDS_TransportMulticastMappingSeq | Declares IDL sequence< DDS_TransportMulticastMapping_t > |
| DDS_TransportMulticastQosPolicy | Specifies the multicast address on which a DDSDataReader wants to receive its data. It can also specify a port number as well as a subset of the available (at the DDSDomainParticipant level) transports with which to receive the multicast data |
| DDS_TransportMulticastSettings_t | Type representing a list of multicast locators |
| DDS_TransportMulticastSettingsSeq | Declares IDL sequence< DDS_TransportMulticastSettings_t > |
| DDS_TransportPriorityQosPolicy | This QoS policy allows the application to take advantage of transports that are capable of sending messages with different priorities |
| DDS_TransportSelectionQosPolicy | Specifies the physical transports a DDSDataWriter or DDSDataReader may use to send or receive data |
| DDS_TransportUnicastQosPolicy | Specifies a subset of transports and a port number that can be used by an Entity to receive data |
| DDS_TransportUnicastSettings_t | Type representing a list of unicast locators |
| DDS_TransportUnicastSettingsSeq | Declares IDL sequence< DDS_TransportUnicastSettings_t > |
| DDS_TypeCode | The definition of a particular data type, which you can use to inspect the name, members, and other properties of types generated with rtiddsgen or to modify types you define yourself at runtime |
| DDS_TypeCodeFactory | A singleton factory for creating, copying, and deleting data type definitions dynamically |
| DDS_TypeSupportQosPolicy | Allows you to attach application-specific values to a DataWriter or DataReader that are passed to the serialization or deserialization routine of the associated data type |
| DDS_UnionMember | A description of a member of a union |
| DDS_UnionMemberSeq | Defines a sequence of union members |
| DDS_UnsignedLongLongSeq | Instantiates FooSeq < DDS_UnsignedLongLong > |
| DDS_UnsignedLongSeq | Instantiates FooSeq < DDS_UnsignedLong > |
| DDS_UnsignedShortSeq | Instantiates FooSeq < DDS_UnsignedShort > |
| DDS_UserDataQosPolicy | Attaches a buffer of opaque data that is distributed by means of Built-in Topics during discovery |
| DDS_ValueMember | A description of a member of a value type |
| DDS_ValueMemberSeq | Defines a sequence of value members |
| DDS_VendorId_t | <<eXtension>> Type used to represent the vendor of the service implementing the RTPS protocol |
| DDS_WaitSetProperty_t | <<eXtension>> Specifies the DDSWaitSet behavior for multiple trigger events |
| DDS_WcharSeq | Instantiates FooSeq < DDS_Wchar > |
| DDS_WireProtocolQosPolicy | Specifies the wire-protocol-related attributes for the DDSDomainParticipant |
| DDS_WriteParams_t | <<eXtension>> Input parameters for writing with FooDataWriter::write_w_params, FooDataWriter::dispose_w_params, FooDataWriter::register_instance_w_params, FooDataWriter::unregister_instance_w_params |
| DDS_WriterDataLifecycleQosPolicy | Controls how a DDSDataWriter handles the lifecycle of the instances (keys) that it is registered to manage |
| DDS_WstringSeq | Instantiates FooSeq < DDS_Wchar* > |
| DDSCondition | <<interface>> Root class for all the conditions that may be attached to a DDSWaitSet |
| DDSConditionSeq | Instantiates FooSeq < DDSCondition > |
| DDSContentFilter | <<interface>> Interface to be used by a custom filter of a DDSContentFilteredTopic |
| DDSContentFilteredTopic | <<interface>> Specialization of DDSTopicDescription that allows for content-based subscriptions |
| DDSDataReader | <<interface>> Allows the application to: (1) declare the data it wishes to receive (i.e. make a subscription) and (2) access the data received by the attached DDSSubscriber |
| DDSDataReaderListener | <<interface>> DDSListener for reader status |
| DDSDataReaderSeq | Declares IDL sequence < DDSDataReader > |
| DDSDataWriter | <<interface>> Allows an application to set the value of the data to be published under a given DDSTopic |
| DDSDataWriterListener | <<interface>> DDSListener for writer status |
| DDSDomainEntity | <<interface>> Abstract base class for all DDS entities except for the DDSDomainParticipant |
| DDSDomainParticipant | <<interface>> Container for all DDSDomainEntity objects |
| DDSDomainParticipantFactory | <<singleton>> <<interface>> Allows creation and destruction of DDSDomainParticipant objects |
| DDSDomainParticipantListener | <<interface>> Listener for participant status |
| DDSDynamicDataReader | Reads (subscribes to) objects of type DDS_DynamicData |
| DDSDynamicDataTypeSupport | A factory for registering a dynamically defined type and creating DDS_DynamicData objects |
| DDSDynamicDataWriter | Writes (publishes) objects of type DDS_DynamicData |
| DDSEntity | <<interface>> Abstract base class for all the DDS objects that support QoS policies, a listener, and a status condition |
| DDSFlowController | <<interface>> A flow controller is the object responsible for shaping the network traffic by determining when attached asynchronous DDSDataWriter instances are allowed to write data |
| DDSGuardCondition | <<interface>> A specific DDSCondition whose trigger_value is completely under the control of the application |
| DDSKeyedOctetsDataReader | <<interface>> Instantiates DataReader < DDS_KeyedOctets > |
| DDSKeyedOctetsDataWriter | <<interface>> Instantiates DataWriter < DDS_KeyedOctets > |
| DDSKeyedOctetsTypeSupport | <<interface>> DDS_KeyedOctets type support |
| DDSKeyedStringDataReader | <<interface>> Instantiates DataReader < DDS_KeyedString > |
| DDSKeyedStringDataWriter | <<interface>> Instantiates DataWriter < DDS_KeyedString > |
| DDSKeyedStringTypeSupport | <<interface>> Keyed string type support |
| DDSListener | <<interface>> Abstract base class for all Listener interfaces |
| DDSMultiTopic | [Not supported (optional)] <<interface>> A specialization of DDSTopicDescription that allows subscriptions that combine/filter/rearrange data coming from several topics |
| DDSOctetsDataReader | <<interface>> Instantiates DataReader < DDS_Octets > |
| DDSOctetsDataWriter | <<interface>> Instantiates DataWriter < DDS_Octets > |
| DDSOctetsTypeSupport | <<interface>> DDS_Octets type support |
| DDSParticipantBuiltinTopicDataDataReader | Instantiates DataReader < DDS_ParticipantBuiltinTopicData > |
| DDSParticipantBuiltinTopicDataTypeSupport | Instantiates TypeSupport < DDS_ParticipantBuiltinTopicData > |
| DDSPropertyQosPolicyHelper | Policy Helpers which facilitate management of the properties in the input policy |
| DDSPublicationBuiltinTopicDataDataReader | Instantiates DataReader < DDS_PublicationBuiltinTopicData > |
| DDSPublicationBuiltinTopicDataTypeSupport | Instantiates TypeSupport < DDS_PublicationBuiltinTopicData > |
| DDSPublisher | <<interface>> A publisher is the object responsible for the actual dissemination of publications |
| DDSPublisherListener | <<interface>> DDSListener for DDSPublisher status |
| DDSPublisherSeq | Declares IDL sequence < DDSPublisher > |
| DDSQueryCondition | <<interface>> These are specialised DDSReadCondition objects that allow the application to also specify a filter on the locally available data |
| DDSReadCondition | <<interface>> Conditions specifically dedicated to read operations and attached to one DDSDataReader |
| DDSStatusCondition | <<interface>> A specific DDSCondition that is associated with each DDSEntity |
| DDSStringDataReader | <<interface>> Instantiates DataReader < char* > |
| DDSStringDataWriter | <<interface>> Instantiates DataWriter < char* > |
| DDSStringTypeSupport | <<interface>> String type support |
| DDSSubscriber | <<interface>> A subscriber is the object responsible for actually receiving data from a subscription |
| DDSSubscriberListener | <<interface>> DDSListener for status about a subscriber |
| DDSSubscriberSeq | Declares IDL sequence < DDSSubscriber > |
| DDSSubscriptionBuiltinTopicDataDataReader | Instantiates DataReader < DDS_SubscriptionBuiltinTopicData > |
| DDSSubscriptionBuiltinTopicDataTypeSupport | Instantiates TypeSupport < DDS_SubscriptionBuiltinTopicData > |
| DDSTopic | <<interface>> The most basic description of the data to be published and subscribed |
| DDSTopicBuiltinTopicDataDataReader | Instantiates DataReader < DDS_TopicBuiltinTopicData > |
| DDSTopicBuiltinTopicDataTypeSupport | Instantiates TypeSupport < DDS_TopicBuiltinTopicData > |
| DDSTopicDescription | <<interface>> Base class for DDSTopic, DDSContentFilteredTopic, and DDSMultiTopic |
| DDSTopicListener | <<interface>> DDSListener for DDSTopic entities |
| DDSTypeSupport | <<interface>> An abstract marker interface that has to be specialized for each concrete user data type that will be used by the application |
| DDSWaitSet | <<interface>> Allows an application to wait until one or more of the attached DDSCondition objects has a trigger_value of DDS_BOOLEAN_TRUE or else until the timeout expires |
| Foo | A representative user-defined data type |
| FooDataReader | <<interface>> <<generic>> User data type-specific data reader |
| FooDataWriter | <<interface>> <<generic>> User data type specific data writer |
| FooSeq | <<interface>> <<generic>> A type-safe, ordered collection of elements. The type of these elements is referred to in this documentation as Foo |
| FooTypeSupport | <<interface>> <<generic>> User data type specific interface |
| NDDS_Config_LibraryVersion_t | The version of a single library shipped as part of an RTI Connext distribution |
| NDDS_Transport_Address_t | Addresses are stored individually as network-ordered bytes |
| NDDS_Transport_Property_t | Base structure that must be inherited by derived Transport Plugin classes |
| NDDS_Transport_Shmem_Property_t | Subclass of NDDS_Transport_Property_t allowing specification of parameters that are specific to the shared-memory transport |
| NDDS_Transport_UDPv4_Property_t | Configurable IPv4/UDP Transport-Plugin properties |
| NDDS_Transport_UDPv6_Property_t | Configurable IPv6/UDP Transport-Plugin properties |
| NDDSConfigLogger | <<interface>> The singleton type used to configure RTI Connext logging |
| NDDSConfigVersion | <<interface>> The version of an RTI Connext distribution |
| NDDSTransportSupport | <<interface>> The utility class used to configure RTI Connext pluggable transports |
| NDDSUtility | Unsupported utility APIs |
| TransportAllocationSettings_t | Allocation settings used by various internal buffers |
RTI Connext C++ API Version 4.5f
Copyright © 17 Mar 2012
Real-Time Innovations, Inc