Class Hierarchy

This inheritance list is sorted roughly, but not completely, alphabetically:

[detail level 12345]

DDS::AllocationSettings_t	Resource allocation settings
DDS::AsynchronousPublisherQosPolicy	Configures the mechanism that sends user data in an external middleware thread
DDS::AvailabilityQosPolicy	Configures the availability of data
DDS::BatchQosPolicy	Used to configure batching of multiple samples into a single network packet in order to increase throughput for small samples
DDS::BuiltinQosProfiles
DDS::BuiltinTopicKey_t	The key type of the built-in topic types
DDS::BuiltinTopicReaderResourceLimits_t	Built-in topic reader's resource limits
DDS::BytesSeq	Instantiates DDS::Sequence < DDS::Bytes >
DDS::BytesTypeSupport	<<interface>> DDS::Bytes type support
DDS::ChannelSettings_t	Type used to configure the properties of a channel
DDS::Condition	<<interface>> Root class for all the conditions that may be attached to a DDS::WaitSet
DDS::GuardCondition	<<interface>> A specific DDS::Condition whose trigger_value is completely under the control of the application
DDS::ReadCondition	<<interface>> Conditions specifically dedicated to read operations and attached to one DDS::DataReader
DDS::QueryCondition	<<interface>> These are specialised DDS::ReadCondition objects that allow the application to also specify a filter on the locally available data
DDS::StatusCondition	<<interface>> A specific DDS::Condition that is associated with each DDS::Entity
NDDS::Config_LibraryVersion_t	The version of a single library shipped as part of an RTI Connext distribution
NDDS::ConfigLogger	<<interface>> The singleton type used to configure RTI Connext logging
NDDS::ConfigVersion	<<interface>> The version of an RTI Connext distribution
DDS::ContentFilterProperty_t	<<eXtension>> Type used to provide all the required information to enable content filtering
DDS::Cookie_t	<<eXtension>> Sequence of bytes
DDS::DatabaseQosPolicy	Various threads and resource limits settings used by RTI Connext to control its internal database
DDS::DataReaderCacheStatus	<<eXtension>> The status of the reader's cache
DDS::DataReaderProtocolQosPolicy	Along with DDS::WireProtocolQosPolicy and DDS::DataWriterProtocolQosPolicy, this QoS policy configures the DDS on-the-network protocol (RTPS)
DDS::DataReaderProtocolStatus	<<eXtension>> The status of a reader's internal protocol related metrics, like the number of samples received, filtered, rejected; and status of wire protocol traffic
DDS::DataReaderQos	QoS policies supported by a DDS::DataReader entity
DDS::DataReaderResourceLimitsQosPolicy	Various settings that configure how a DDS::DataReader allocates and uses physical memory for internal resources
DDS::DataWriterCacheStatus	<<eXtension>> The status of the writer's cache
DDS::DataWriterProtocolQosPolicy	Protocol that applies only to DDS::DataWriter instances
DDS::DataWriterProtocolStatus	<<eXtension>> The status of a writer's internal protocol related metrics, like the number of samples pushed, pulled, filtered; and status of wire protocol traffic
DDS::DataWriterQos	QoS policies supported by a DDS::DataWriter entity
DDS::DataWriterResourceLimitsQosPolicy	Various settings that configure how a DDS::DataWriter allocates and uses physical memory for internal resources
DDS::DeadlineQosPolicy	Expresses the maximum duration (deadline) within which an instance is expected to be updated
DDS::DestinationOrderQosPolicy	Controls how the middleware will deal with data sent by multiple DDS::DataWriter entities for the same instance of data (i.e., same DDS::Topic and key)
DDS::DiscoveryConfigQosPolicy	Settings for discovery configuration
DDS::DiscoveryQosPolicy	Configures the mechanism used by the middleware to automatically discover and connect with new remote applications
DDS::DomainParticipantConfigParams_t
DDS::DomainParticipantFactory	<<singleton>> <<interface>> Allows creation and destruction of DDS::DomainParticipant objects
DDS::DomainParticipantFactoryQos	QoS policies supported by a DDS::DomainParticipantFactory
DDS::DomainParticipantQos	QoS policies supported by a DDS::DomainParticipant entity
DDS::DomainParticipantResourceLimitsQosPolicy	Various settings that configure how a DDS::DomainParticipant allocates and uses physical memory for internal resources, including the maximum sizes of various properties
DDS::DurabilityQosPolicy	This QoS policy specifies whether or not RTI Connext will store and deliver previously published data samples to new DDS::DataReader entities that join the network later
DDS::DurabilityServiceQosPolicy	Various settings to configure the external RTI Persistence Service used by RTI Connext for DataWriters with a DDS::DurabilityQosPolicy setting of ::DDS::DurabilityQosPolicyKind::PERSISTENT_DURABILITY_QOS or ::DDS::DurabilityQosPolicyKind::TRANSIENT_DURABILITY_QOS
DDS::Duration_t	Type for duration representation
DDS::DynamicDataInfo	A descriptor for a DDS::DynamicData object
DDS::DynamicDataMemberInfo	A descriptor for a single member (i.e. field) of dynamically defined data type
DDS::DynamicDataProperty_t	A collection of attributes used to configure DDS::DynamicData objects
DDS::DynamicDataSeq	An ordered collection of DDS::DynamicData elements
DDS::DynamicDataTypeProperty_t	A collection of attributes used to configure DDS::DynamicDataTypeSupport objects
DDS::DynamicDataTypeSerializationProperty_t	Properties that govern how data of a certain type will be serialized on the network
DDS::DynamicDataTypeSupport	A factory for registering a dynamically defined type and creating DDS::DynamicData objects
DDS::EndpointGroup_t	Specifies a group of endpoints that can be collectively identified by a name and satisfied by a quorum
DDS::Entity	<<interface>> Abstract base class for all the DDS objects that support QoS policies, a listener, and a status condition
DDS::DomainEntity	<<interface>> Abstract base class for all DDS entities except for the DDS::DomainParticipant
DDS::DataReader	<<interface>> Allows the application to: (1) declare the data it wishes to receive (i.e. make a subscription) and (2) access the data received by the attached DDS::Subscriber
DDS::TypedDataReader< T >	<<interface>> <<generic>> User data type-specific data reader
DDS::BytesDataReader	<<interface>> Instantiates DataReader < DDS::Bytes >
DDS::DynamicDataReader	Reads (subscribes to) objects of type DDS::DynamicData
DDS::KeyedBytesDataReader	<<interface>> Instantiates DataReader < DDS::KeyedBytes >
DDS::KeyedStringDataReader	<<interface>> Instantiates DataReader < DDS::KeyedString >
DDS::ParticipantBuiltinTopicDataDataReader	Instantiates DataReader < DDS::ParticipantBuiltinTopicData >
DDS::PublicationBuiltinTopicDataDataReader	Instantiates DataReader < DDS::PublicationBuiltinTopicData >
DDS::StringDataReader	<<interface>> Instantiates DataReader < System::String >
DDS::SubscriptionBuiltinTopicDataDataReader	Instantiates DataReader < DDS::SubscriptionBuiltinTopicData >
DDS::TopicBuiltinTopicDataDataReader	Instantiates DataReader < DDS::TopicBuiltinTopicData >
FooDataReader	<<interface>> <<generic>> User data type-specific data reader
FooDataReader	<<interface>> <<generic>> User data type-specific data reader
DDS::TypedDataReader< Bytes^ >
DDS::TypedDataReader< DynamicData^ >
DDS::TypedDataReader< Foo^ >
DDS::TypedDataReader< KeyedBytes^ >
DDS::TypedDataReader< KeyedString^ >
DDS::TypedDataReader< ParticipantBuiltinTopicData^ >
DDS::TypedDataReader< PublicationBuiltinTopicData^ >
DDS::TypedDataReader< StringWrapper^ >
DDS::TypedDataReader< SubscriptionBuiltinTopicData^ >
DDS::TypedDataReader< TopicBuiltinTopicData^ >
DDS::DataWriter	<<interface>> Allows an application to set the value of the data to be published under a given DDS::Topic
DDS::TypedDataWriter< T >	<<interface>> <<generic>> User data type specific data writer
DDS::BytesDataWriter	<<interface>> Instantiates DataWriter < DDS::Bytes >
DDS::DynamicDataWriter	Writes (publishes) objects of type DDS::DynamicData
DDS::KeyedBytesDataWriter	<<interface>> Instantiates DataWriter < DDS::KeyedBytes >
DDS::KeyedStringDataWriter	<<interface>> Instantiates DataWriter < DDS::KeyedString >
DDS::StringDataWriter	<<interface>> Instantiates DataWriter < System::String >
FooDataWriter	<<interface>> <<generic>> User data type specific data writer
FooDataWriter	<<interface>> <<generic>> User data type specific data writer
DDS::TypedDataWriter< Bytes^ >
DDS::TypedDataWriter< DynamicData^ >
DDS::TypedDataWriter< Foo^ >
DDS::TypedDataWriter< KeyedBytes^ >
DDS::TypedDataWriter< KeyedString^ >
DDS::TypedDataWriter< StringWrapper^ >
DDS::Publisher	<<interface>> A publisher is the object responsible for the actual dissemination of publications
DDS::Subscriber	<<interface>> A subscriber is the object responsible for actually receiving data from a subscription
DDS::Topic	<<interface>> The most basic description of the data to be published and subscribed
DDS::DomainParticipant	<<interface>> Container for all DDS::DomainEntity objects
DDS::EntityFactoryQosPolicy	A QoS policy for all DDS::Entity types that can act as factories for one or more other DDS::Entity types
DDS::EntityNameQosPolicy	Assigns a name and a role name to a DDS::DomainParticipant, DDS::Publisher, DDS::Subscriber, DDS::DataWriter or DDS::DataReader. Except for DDS::Publisher and DDS::Subscriber, these names will be visible during the discovery process and in RTI tools to help you visualize and debug your system
DDS::EnumMember	A description of a member of an enumeration
DDS::EventQosPolicy	Settings for event
DDS::Exception	Superclass of all exceptions thrown by the RTI Connext API
DDS::Retcode_AlreadyDeleted	The object target of this operation has already been deleted
DDS::Retcode_BadParameter	Illegal parameter value
DDS::Retcode_Error	Generic, unspecified error
DDS::Retcode_IllegalOperation	The operation was called under improper circumstances
DDS::Retcode_ImmutablePolicy	Application attempted to modify an immutable QoS policy
DDS::Retcode_InconsistentPolicy	Application specified a set of QoS policies that are not consistent with each other
DDS::Retcode_NoData	Indicates a transient situation where the operation did not return any data but there is no inherent error
DDS::Retcode_NotEnabled	Operation invoked on a DDS::Entity that is not yet enabled
DDS::Retcode_OutOfResources	RTI Connext ran out of the resources needed to complete the operation
DDS::Retcode_PreconditionNotMet	A pre-condition for the operation was not met
DDS::Retcode_Timeout	The operation timed out
DDS::Retcode_Unsupported	Unsupported operation. Can only returned by operations that are unsupported
DDS::ExclusiveAreaQosPolicy	Configures multi-thread concurrency and deadlock prevention capabilities
DDS::FlowController	<<interface>> A flow controller is the object responsible for shaping the network traffic by determining when attached asynchronous DDS::DataWriter instances are allowed to write data
DDS::FlowControllerProperty_t	Determines the flow control characteristics of the DDS::FlowController
DDS::FlowControllerTokenBucketProperty_t	DDS::FlowController uses the popular token bucket approach for open loop network flow control. The flow control characteristics are determined by the token bucket properties
DDS::GroupDataQosPolicy	Attaches a buffer of opaque data that is distributed by means of Built-in Topics during discovery
DDS::GUID_t	Type for GUID (Global Unique Identifier) representation
DDS::HistoryQosPolicy	Specifies the behavior of RTI Connext in the case where the value of a sample changes (one or more times) before it can be successfully communicated to one or more existing subscribers
DDS::ICopyable< T >	<<eXtension>> <<interface>> Interface for all the user-defined data type classes that support copy
DDS::Bytes	Built-in type consisting of a variable-length array of opaque bytes
DDS::DynamicData	A sample of any complex data type, which can be inspected and manipulated reflectively
DDS::KeyedBytes	Built-in type consisting of a variable-length array of opaque bytes and a string that is the key
DDS::KeyedString	Keyed string built-in type
DDS::ParticipantBuiltinTopicData	Entry created when a DomainParticipant object is discovered
DDS::PublicationBuiltinTopicData	Entry created when a DDS::DataWriter is discovered in association with its Publisher
DDS::SubscriptionBuiltinTopicData	Entry created when a DDS::DataReader is discovered in association with its Subscriber
DDS::TopicBuiltinTopicData	Entry created when a Topic object discovered
Foo	A representative user-defined data type
Foo	A representative user-defined data type
DDS::ICopyable< Bytes^ >
DDS::ICopyable< DynamicData^ >
DDS::ICopyable< Foo^ >
DDS::ICopyable< KeyedBytes^ >
DDS::ICopyable< KeyedString^ >
DDS::ICopyable< ParticipantBuiltinTopicData^ >
DDS::ICopyable< PublicationBuiltinTopicData^ >
DDS::ICopyable< StringWrapper^ >
DDS::ICopyable< SubscriptionBuiltinTopicData^ >
DDS::ICopyable< TopicBuiltinTopicData^ >
DDS::InconsistentTopicStatus	::DDS::StatusKind::INCONSISTENT_TOPIC_STATUS
DDS::InstanceHandle_t	Type definition for an instance handle
DDS::InstanceStateKind	Indicates is the samples are from a live DDS::DataWriter or not
DDS::ITopicDescription	<<interface>> Base class for DDS::Topic, DDS::ContentFilteredTopic, and DDS::MultiTopic
DDS::ContentFilteredTopic	<<interface>> Specialization of ::DDS::TopicDescription that allows for content-based subscriptions
DDS::MultiTopic	[Not supported (optional)] <<interface>> A specialization of ::DDS::TopicDescription that allows subscriptions that combine/filter/rearrange data coming from several topics
DDS::Topic	<<interface>> The most basic description of the data to be published and subscribed
DDS::KeyedBytesSeq	Instantiates DDS::Sequence < DDS::KeyedBytes >
DDS::KeyedBytesTypeSupport	<<interface>> DDS::KeyedBytes type support
DDS::KeyedStringSeq	Instantiates DDS::Sequence < DDS::KeyedString >
DDS::KeyedStringTypeSupport	<<interface>> Keyed string type support
DDS::LatencyBudgetQosPolicy	Provides a hint as to the maximum acceptable delay from the time the data is written to the time it is received by the subscribing applications
DDS::LifespanQosPolicy	Specifies how long the data written by the DDS::DataWriter is considered valid
DDS::Listener	<<interface>> Abstract base class for all Listener interfaces
DDS::DataReaderListener	<<interface>> DDS::Listener for reader status
DDS::SubscriberListener	<<interface>> DDS::Listener for status about a subscriber
DDS::DomainParticipantListener	<<interface>> Listener for participant status
DDS::DataWriterListener	<<interface>> DDS::Listener for writer status
DDS::PublisherListener	<<interface>> DDS::Listener for DDS::Publisher status
DDS::DomainParticipantListener	<<interface>> Listener for participant status
DDS::TopicListener	<<interface>> DDS::Listener for DDS::Topic entities
DDS::DomainParticipantListener	<<interface>> Listener for participant status
Example.EntityExample.MyEntityListener
DDS::LivelinessChangedStatus	::DDS::StatusKind::LIVELINESS_CHANGED_STATUS
DDS::LivelinessLostStatus	::DDS::StatusKind::LIVELINESS_LOST_STATUS
DDS::LivelinessQosPolicy	Specifies and configures the mechanism that allows DDS::DataReader entities to detect when DDS::DataWriter entities become disconnected or "dead."
RTI.Connext.Infrastructure.LoanedSamples< T >	Provides access to a collection of middleware-loaned samples
DDS::Locator_t	<<eXtension>> Type used to represent the addressing information needed to send a message to an RTPS Endpoint using one of the supported transports
DDS::LocatorFilter_t	The QoS policy used to report the configuration of a MultiChannel DataWriter as part of DDS::PublicationBuiltinTopicData
DDS::LocatorFilterQosPolicy	The QoS policy used to report the configuration of a MultiChannel DataWriter as part of DDS::PublicationBuiltinTopicData
NDDS::LoggerDevice	<<interface>> Logging device interface. Use for user-defined logging devices
DDS::LoggingQosPolicy	Configures the RTI Connext logging facility
NDDS::LogMessage	Log message
DDS::LongDouble	Defines an extra-precision floating-point data type, equivalent to IDL/CDR long double
DDS::MultiChannelQosPolicy	Configures the ability of a DataWriter to send data on different multicast groups (addresses) based on the value of the data
DDS::OfferedDeadlineMissedStatus	::DDS::StatusKind::OFFERED_DEADLINE_MISSED_STATUS
DDS::OfferedIncompatibleQosStatus	::DDS::StatusKind::OFFERED_INCOMPATIBLE_QOS_STATUS
DDS::OwnershipQosPolicy	Specifies whether it is allowed for multiple DDS::DataWriter (s) to write the same instance of the data and if so, how these modifications should be arbitrated
DDS::OwnershipStrengthQosPolicy	Specifies the value of the strength used to arbitrate among multiple DDS::DataWriter objects that attempt to modify the same instance of a data type (identified by DDS::Topic + key)
DDS::ParticipantBuiltinTopicDataSeq	Instantiates DDS::Sequence < DDS::ParticipantBuiltinTopicData >
DDS::ParticipantBuiltinTopicDataTypeSupport	Instantiates TypeSupport < DDS::ParticipantBuiltinTopicData >
DDS::PartitionQosPolicy	Set of strings that introduces a logical partition among the topics visible by a DDS::Publisher and a DDS::Subscriber
DDS::PresentationQosPolicy	Specifies how the samples representing changes to data instances are presented to a subscribing application
DDS::ProductVersion_t	<<eXtension>> Type used to represent the current version of RTI Connext
DDS::ProfileQosPolicy	Configures the way that XML documents containing QoS profiles are loaded by RTI Connext
DDS::Property_t	Properties are name/value pairs objects
DDS::PropertyQosPolicy	Stores name/value(string) pairs that can be used to configure certain parameters of RTI Connext that are not exposed through formal QoS policies. Can also be used to store and propagate application-specific name/value pairs that can be retrieved by user code during discovery
DDS::PropertyQosPolicyHelper	Policy Helpers which facilitate management of the properties in the input policy
DDS::ProtocolVersion_t	<<eXtension>> Type used to represent the version of the RTPS protocol
DDS::PublicationBuiltinTopicDataSeq	Instantiates DDS::Sequence < DDS::PublicationBuiltinTopicData >
DDS::PublicationBuiltinTopicDataTypeSupport	Instantiates TypeSupport < DDS::PublicationBuiltinTopicData >
DDS::PublicationMatchedStatus	::DDS::StatusKind::PUBLICATION_MATCHED_STATUS
DDS::PublisherQos	QoS policies supported by a DDS::Publisher entity
DDS::PublishModeQosPolicy	Specifies how RTI Connext sends application data on the network. This QoS policy can be used to tell RTI Connext to use its own thread to send data, instead of the user thread
DDS::QosPolicyCount	Type to hold a counter for a ::DDS::QosPolicyId_t
DDS::ReaderDataLifecycleQosPolicy	Controls how a DataReader manages the lifecycle of the data that it has received
DDS::ReceiverPoolQosPolicy	Configures threads used by RTI Connext to receive and process data from transports (for example, UDP sockets)
DDS::ReliabilityQosPolicy	Indicates the level of reliability offered/requested by RTI Connext
DDS::ReliableReaderActivityChangedStatus	<<eXtension>> Describes the activity (i.e. are acknowledgements forthcoming) of reliable readers matched to a reliable writer
DDS::ReliableWriterCacheChangedStatus	<<eXtension>> A summary of the state of a data writer's cache of unacknowledged samples written
DDS::ReliableWriterCacheEventCount	<<eXtension>> The number of times the number of unacknowledged samples in the cache of a reliable writer hit a certain well-defined threshold
RTI.Connext.RequestReply.Replier< TReq, TRep >	Allows receiving requests and sending replies
RTI.Connext.RequestReply.ReplierListener< TReq, TRep >	Called when a RTI.Connext.RequestReply::Replier<TReq,TRep> has new available requests
RTI.Connext.RequestReply.ReplierParams< TReq, TRep >	Contains the parameters for creating a RTI.Connext.RequestReply::Replier<TReq,TRep>
DDS::RequestedDeadlineMissedStatus	::DDS::StatusKind::REQUESTED_DEADLINE_MISSED_STATUS
DDS::RequestedIncompatibleQosStatus	::DDS::StatusKind::REQUESTED_INCOMPATIBLE_QOS_STATUS
RTI.Connext.RequestReply.Requester< TReq, TRep >	Allows sending requests and receiving replies
RTI.Connext.RequestReply.RequesterParams	Contains the parameters for creating a RTI.Connext.RequestReply::Requester<TReq,TRep>
DDS::ResourceLimitsQosPolicy	Controls the amount of physical memory allocated for DDS entities, if dynamic allocations are allowed, and how they occur. Also controls memory usage among different instance values for keyed topics
DDS::RtpsReliableReaderProtocol_t	Qos related to reliable reader protocol defined in RTPS
DDS::RtpsReliableWriterProtocol_t	QoS related to the reliable writer protocol defined in RTPS
DDS::RtpsWellKnownPorts_t	RTPS well-known port mapping configuration
RTI.Connext.Infrastructure.Sample< T >	A data sample and related info received from the middleware
DDS::SampleIdentity_t	Type definition for a Sample Identity
DDS::SampleInfo	Information that accompanies each sample that is read or taken
DDS::SampleLostStatus	::DDS::StatusKind::SAMPLE_LOST_STATUS
DDS::SampleRejectedStatus	::DDS::StatusKind::SAMPLE_REJECTED_STATUS
DDS::SampleStateKind	Indicates whether or not a sample has ever been read
DDS::Sequence< T >	<<interface>> <<generic>> A type-safe, ordered collection of elements. The type of these elements is referred to in this documentation as Foo
DDS::ChannelSettingsSeq	Declares IDL sequence< DDS::ChannelSettings_t >
DDS::ConditionSeq	Instantiates DDS::Sequence < DDS::Condition >
DDS::DataReaderSeq	Declares IDL sequence < DDS::DataReader >
DDS::EndpointGroupSeq	A sequence of DDS::EndpointGroup_t
DDS::EnumMemberSeq	Defines a sequence of enumerator members
DDS::LocatorFilterSeq	Declares IDL sequence< DDS::LocatorFilter_t >
DDS::LocatorSeq	Declares IDL sequence < DDS::Locator_t >
DDS::PropertySeq	Declares IDL sequence < DDS::Property_t >
DDS::PublisherSeq	Declares IDL sequence < DDS::Publisher >
DDS::StructMemberSeq	Defines a sequence of struct members
DDS::SubscriberSeq	Declares IDL sequence < DDS::Subscriber >
DDS::TransportInfoSeq	Instantiates DDS::Sequence < DDS::TransportInfo_t >
DDS::TransportMulticastMappingSeq	Declares IDL sequence< DDS::TransportMulticastMapping_t >
DDS::TransportMulticastSettingsSeq	Declares IDL sequence< DDS::TransportMulticastSettings_t >
DDS::TransportUnicastSettingsSeq	Declares IDL sequence< DDS::TransportUnicastSettings_t >
DDS::UnionMemberSeq	Defines a sequence of union members
DDS::ValueMemberSeq	Defines a sequence of value members
DDS::WstringSeq	Instantiates DDS::Sequence < System::Char* >
DDS::Sequence< ChannelSettings_t^ >
DDS::Sequence< Condition^ >
DDS::Sequence< DataReader^ >
DDS::Sequence< DataWriter^ >
DDS::Sequence< Discovery_EndpointInformation^ >
DDS::Sequence< Discovery_ParticipantInformation^ >
DDS::Sequence< E >
DDS::LoanableSequence< E >	A sequence implementation used internally by the middleware to efficiently manage memory during DDS::TypedDataReader::read and DDS::TypedDataReader::take operations
DDS::SampleInfoSeq	Declares IDL sequence < DDS::SampleInfo >
FooSeq	<<interface>> <<generic>> A type-safe, ordered collection of elements. The type of these elements is referred to in this documentation as Foo
DDS::Sequence< EndpointGroup_t^ >
DDS::Sequence< EnumMember^ >
DDS::Sequence< Foo^ >
DDS::LoanableSequence< Foo^ >
DDS::Sequence< InstanceHandle_t >
DDS::InstanceHandleSeq	Instantiates DDS::Sequence < DDS::InstanceHandle_t >
DDS::Sequence< Locator_t^ >
DDS::Sequence< LocatorFilter_t^ >
DDS::Sequence< LongDouble >
DDS::LongDoubleSeq	Instantiates DDS::Sequence < DDS::LongDouble >
DDS::Sequence< M^ >
DDS::LoanableSequence< M^ >
DDS::Sequence< ParticipantBuiltinTopicData^ >
DDS::LoanableSequence< ParticipantBuiltinTopicData^ >
DDS::Sequence< Property_t^ >
DDS::Sequence< PublicationBuiltinTopicData^ >
DDS::LoanableSequence< PublicationBuiltinTopicData^ >
DDS::Sequence< Publisher^ >
DDS::Sequence< QosPolicyCount >
DDS::QosPolicyCountSeq	Declares IDL sequence < DDS::QosPolicyCount >
DDS::Sequence< SampleInfo^ >
DDS::LoanableSequence< SampleInfo^ >
DDS::Sequence< StructMember^ >
DDS::Sequence< Subscriber^ >
DDS::Sequence< SubscriptionBuiltinTopicData^ >
DDS::LoanableSequence< SubscriptionBuiltinTopicData^ >
DDS::Sequence< System::Boolean >
DDS::BooleanSeq	Instantiates DDS::Sequence < System::Boolean >
DDS::Sequence< System::Byte >
DDS::ByteSeq	Instantiates DDS::Sequence < System::Byte >
DDS::Sequence< System::Char >
DDS::CharSeq	Instantiates DDS::Sequence < System::Char >
DDS::WcharSeq	Instantiates DDS::Sequence < System::Char >
DDS::Sequence< System::Double >
DDS::DoubleSeq	Instantiates DDS::Sequence < System::Double >
DDS::Sequence< System::Int16 >
DDS::ShortSeq	Instantiates DDS::Sequence < System::Int16 >
DDS::Sequence< System::Int32 >
DDS::IntSeq	Instantiates DDS::Sequence < System::Int32 >
DDS::Sequence< System::Int64 >
DDS::LongSeq	Instantiates DDS::Sequence < System::Int64 >
DDS::Sequence< System::Single >
DDS::FloatSeq	Instantiates DDS::Sequence < System::Single >
DDS::Sequence< System::String^ >
DDS::Sequence< System::UInt16 >
DDS::UnsignedShortSeq	Instantiates DDS::Sequence < System::UInt16 >
DDS::Sequence< System::UInt32 >
DDS::UnsignedIntSeq	Instantiates DDS::Sequence < System::UInt32 >
DDS::Sequence< System::UInt64 >
DDS::UnsignedLongSeq	Instantiates DDS::Sequence < System::UInt64 >
DDS::Sequence< TopicBuiltinTopicData^ >
DDS::LoanableSequence< TopicBuiltinTopicData^ >
DDS::Sequence< TransportEncapsulationSettings_t^ >
DDS::Sequence< TransportInfo_t^ >
DDS::Sequence< TransportMulticastMapping_t^ >
DDS::Sequence< TransportMulticastSettings_t^ >
DDS::Sequence< TransportUnicastSettings_t^ >
DDS::Sequence< UnionMember^ >
DDS::Sequence< ValueMember^ >
DDS::SequenceNumber_t	Type for sequence number representation
DDS::ShmemTransport	Built-in transport plug-in for inter-process communications using shared memory
RTI.Connext.RequestReply.SimpleReplier< TReq, TRep >	A callback-based replier
RTI.Connext.RequestReply.SimpleReplierListener< TReq, TRep >	The listener called by a SimpleReplier
RTI.Connext.RequestReply.SimpleReplierParams< TReq, TRep >	Contains the parameters for creating a RTI.Connext.RequestReply::SimpleReplier<TReq,TRep>
DDS::StringSeq	Instantiates DDS::Sequence < System::String > with value type semantics
DDS::StringTypeSupport	<<interface>> String type support
DDS::StructMember	A description of a member of a struct
DDS::SubscriberQos	QoS policies supported by a DDS::Subscriber entity
DDS::SubscriptionBuiltinTopicDataSeq	Instantiates DDS::Sequence < DDS::SubscriptionBuiltinTopicData >
DDS::SubscriptionBuiltinTopicDataTypeSupport	Instantiates TypeSupport < DDS::SubscriptionBuiltinTopicData >
DDS::SubscriptionMatchedStatus	::DDS::StatusKind::SUBSCRIPTION_MATCHED_STATUS
DDS::SystemResourceLimitsQosPolicy	Configures DDS::DomainParticipant-independent resources used by RTI Connext. Mainly used to change the maximum number of DDS::DomainParticipant entities that can be created within a single process (address space)
DDS::ThreadSettings_t	The properties of a thread of execution
DDS::Time_t	Type for time representation
DDS::TimeBasedFilterQosPolicy	Filter that allows a DDS::DataReader to specify that it is interested only in (potentially) a subset of the values of the data
DDS::TopicBuiltinTopicDataSeq	Instantiates DDS::Sequence < DDS::TopicBuiltinTopicData >
DDS::TopicBuiltinTopicDataTypeSupport	Instantiates TypeSupport < DDS::TopicBuiltinTopicData >
DDS::TopicDataQosPolicy	Attaches a buffer of opaque data that is distributed by means of Built-in Topics during discovery
DDS::TopicQos	QoS policies supported by a DDS::Topic entity
DDS::TransportBuiltinKindAlias	Bits in ::DDS::TransportBuiltinKindMask
DDS::TransportBuiltinQosPolicy	Specifies which built-in transports are used
DDS::TransportEncapsulationSettings_t
DDS::TransportInfo_t	Contains the class_id and message_size_max of an installed transport
DDS::TransportMulticastMapping_t	Type representing a list of multicast mapping elements
DDS::TransportMulticastMappingFunction_t	Type representing an external mapping function
DDS::TransportMulticastMappingQosPolicy	Specifies a list of topic_expressions and multicast addresses that can be used by an Entity with a specific topic name to receive data
DDS::TransportMulticastQosPolicy	Specifies the multicast address on which a DDS::DataReader wants to receive its data. It can also specify a port number as well as a subset of the available (at the DDS::DomainParticipant level) transports with which to receive the multicast data
DDS::TransportMulticastSettings_t	Type representing a list of multicast locators
DDS::TransportPriorityQosPolicy	This QoS policy allows the application to take advantage of transports that are capable of sending messages with different priorities
DDS::TransportSelectionQosPolicy	Specifies the physical transports a DDS::DataWriter or DDS::DataReader may use to send or receive data
DDS::TransportUnicastQosPolicy	Specifies a subset of transports and a port number that can be used by an Entity to receive data
DDS::TransportUnicastSettings_t	Type representing a list of unicast locators
DDS::TypeCode	The definition of a particular data type, which you can use to inspect the name, members, and other properties of types generated with rtiddsgen or to modify types you define yourself at runtime
DDS::TypeCodeFactory	A singleton factory for creating, copying, and deleting data type definitions dynamically
DDS::TypeConsistencyEnforcementQosPolicy	Defines the rules for determining whether the type used to publish a given topic is consistent with that used to subscribe to it
DDS::TypeObject
DDS::TypeSupport	<<interface>> An abstract marker interface that has to be specialized for each concrete user data type that will be used by the application
FooTypeSupport	<<interface>> <<generic>> User data type specific interface
DDS::TypeSupportQosPolicy	Allows you to attach application-specific values to a DDS::DataWriter or DDS::DataReader, which are passed to the serialization or deserialization routine of the associated data type and choose whether to set padding bytes to zero during serialization
DDS::UDPv4Transport	Built-in transport plug-in using UDP/IPv4
DDS::UDPv6Transport	Built-in transport plug-in using UDP/IPv6
DDS::UnionMember	A description of a member of a union
DDS::UserDataQosPolicy	Attaches a buffer of opaque data that is distributed by means of Built-in Topics during discovery
DDS::ValueMember	A description of a member of a value type
DDS::VendorId_t	<<eXtension>> Type used to represent the vendor of the service implementing the RTPS protocol
DDS::ViewStateKind	Indicates whether or not an instance is new
DDS::WaitSet	<<interface>> Allows an application to wait until one or more of the attached DDS::Condition objects has a trigger_value of true or else until the timeout expires
DDS::WaitSetProperty_t	<<eXtension>> Specifies the DDS::WaitSet behavior for multiple trigger events
DDS::WireProtocolQosPolicy	Specifies the wire-protocol-related attributes for the DDS::DomainParticipant
DDS::WriterDataLifecycleQosPolicy	Controls how a DDS::DataWriter handles the lifecycle of the instances (keys) that it is registered to manage
RTI.Connext.Infrastructure.WriteSample< T >	A sample for writing data