<<extension>> QoS libraries, profiles, and snippets that are automatically built into RTI Connext. More...

Classes
class	DDS::BuiltinQosProfiles
	The available built-in QoS libraries, profiles, and snippets. More...

Variables
static System::String ^	DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB
	A library of non-experimental QoS profiles. More...

static System::String ^	DDS::BuiltinQosProfiles::PROFILE_BASELINE_ROOT
	The root baseline QoS values from which all other Baseline.X.X.X profiles inherit. More...

static System::String ^	DDS::BuiltinQosProfiles::PROFILE_BASELINE
	The most up-to-date QoS default values. More...

static System::String ^	DDS::BuiltinQosProfiles::PROFILE_BASELINE_5_0_0
	The QoS default values for version 5.0.0. More...

static System::String ^	DDS::BuiltinQosProfiles::PROFILE_BASELINE_5_1_0
	The QoS default values for version 5.1.0. More...

static System::String ^	DDS::BuiltinQosProfiles::PROFILE_BASELINE_5_2_0
	The QoS default values for version 5.2.0. More...

static System::String ^	DDS::BuiltinQosProfiles::PROFILE_BASELINE_5_3_0
	The QoS default values for version 5.3.0. More...

static System::String ^	DDS::BuiltinQosProfiles::PROFILE_BASELINE_6_0_0
	The QoS default values for version 6.0.0. More...

static System::String ^	DDS::BuiltinQosProfiles::PROFILE_BASELINE_6_1_0
	The QoS default values for version 6.1.0. More...

static System::String ^	DDS::BuiltinQosProfiles::PROFILE_GENERIC_COMMON
	A common Participant base profile. More...

static System::String ^	DDS::BuiltinQosProfiles::PROFILE_GENERIC_MONITORING_COMMON
	Enables RTI Monitoring Library. More...

static System::String ^	DDS::BuiltinQosProfiles::PROFILE_GENERIC_CONNEXT_MICRO_COMPATIBILITY
	Sets the values necessary to communicate with RTI Connext Micro. More...

static System::String ^	DDS::BuiltinQosProfiles::PROFILE_GENERIC_CONNEXT_MICRO_COMPATIBILITY_2_4_9
	Sets the values necessary to communicate with RTI Connext Micro versions 2.4.4 through at least 2.4.9. More...

static System::String ^	DDS::BuiltinQosProfiles::PROFILE_GENERIC_CONNEXT_MICRO_COMPATIBILITY_2_4_3
	Sets the values necessary to communicate with RTI Connext Micro versions 2.4.3 and ealier. More...

static System::String ^	DDS::BuiltinQosProfiles::PROFILE_GENERIC_OTHER_DDS_VENDOR_COMPATIBILITY
	Sets the values necessary to interoperate with other DDS vendors. More...

static System::String ^	DDS::BuiltinQosProfiles::PROFILE_GENERIC_510_TRANSPORT_COMPATIBILITY
	Sets the values necessary to interoperate with RTI Connext 5.1.0 using the UDPv6 and/or SHMEM transports. More...

static System::String ^	DDS::BuiltinQosProfiles::PROFILE_GENERIC_SECURITY
	Loads the DDS Secure builtin plugins. More...

static System::String ^	DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB_EXP
	A library of experimental QoS profiles. More...

static System::String ^	DDS::BuiltinQosProfiles::PROFILE_GENERIC_STRICT_RELIABLE
	Enables strict reliability. More...

static System::String ^	DDS::BuiltinQosProfiles::PROFILE_GENERIC_KEEP_LAST_RELIABLE
	Enables keep-last reliability. More...

static System::String ^	DDS::BuiltinQosProfiles::PROFILE_GENERIC_BEST_EFFORT
	Enables best-effort reliability kind. More...

static System::String ^	DDS::BuiltinQosProfiles::PROFILE_GENERIC_STRICT_RELIABLE_HIGH_THROUGHPUT
	A profile that can be used to achieve high throughput. More...

static System::String ^	DDS::BuiltinQosProfiles::PROFILE_GENERIC_STRICT_RELIABLE_LOW_LATENCY
	A profile that can be used to achieve low latency. More...

static System::String ^	DDS::BuiltinQosProfiles::PROFILE_GENERIC_PARTICIPANT_LARGE_DATA
	A common Participant base profile to facilitate sending large data. More...

static System::String ^	DDS::BuiltinQosProfiles::PROFILE_GENERIC_PARTICIPANT_LARGE_DATA_MONITORING
	Configures Participants for large data and monitoring. More...

static System::String ^	DDS::BuiltinQosProfiles::PROFILE_GENERIC_STRICT_RELIABLE_LARGE_DATA
	Configures endpoints for sending large data with strict reliability. More...

static System::String ^	DDS::BuiltinQosProfiles::PROFILE_GENERIC_KEEP_LAST_RELIABLE_LARGE_DATA
	Configures endpoints for sending large data with keep-last reliability. More...

static System::String ^	DDS::BuiltinQosProfiles::PROFILE_GENERIC_STRICT_RELIABLE_LARGE_DATA_FAST_FLOW
	Configures strictly reliable communication for large data with a fast flow controller. More...

static System::String ^	DDS::BuiltinQosProfiles::PROFILE_GENERIC_STRICT_RELIABLE_LARGE_DATA_MEDIUM_FLOW
	Configures strictly reliable communication for large data with a medium flow controller. More...

static System::String ^	DDS::BuiltinQosProfiles::PROFILE_GENERIC_STRICT_RELIABLE_LARGE_DATA_SLOW_FLOW
	Configures strictly reliable communication for large data with a slow flow controller. More...

static System::String ^	DDS::BuiltinQosProfiles::PROFILE_GENERIC_KEEP_LAST_RELIABLE_LARGE_DATA_FAST_FLOW
	Configures keep-last reliable communication for large data with a fast flow controller. More...

static System::String ^	DDS::BuiltinQosProfiles::PROFILE_GENERIC_KEEP_LAST_RELIABLE_LARGE_DATA_MEDIUM_FLOW
	Configures keep-last reliable communication for large data with a medium flow controller. More...

static System::String ^	DDS::BuiltinQosProfiles::PROFILE_GENERIC_KEEP_LAST_RELIABLE_LARGE_DATA_SLOW_FLOW
	Configures keep-last reliable communication for large data with a slow flow controller. More...

static System::String ^	DDS::BuiltinQosProfiles::PROFILE_GENERIC_KEEP_LAST_RELIABLE_TRANSIENT_LOCAL
	Persists the samples of a DataWriter as long as the entity exists. More...

static System::String ^	DDS::BuiltinQosProfiles::PROFILE_GENERIC_KEEP_LAST_RELIABLE_TRANSIENT
	Persists samples using RTI Persistence Service. More...

static System::String ^	DDS::BuiltinQosProfiles::PROFILE_GENERIC_KEEP_LAST_RELIABLE_PERSISTENT
	Persists samples in permanent storage, like a disk, using RTI Persistence Service. More...

static System::String ^	DDS::BuiltinQosProfiles::PROFILE_GENERIC_AUTO_TUNING
	Enables the Turbo Mode batching and Auto Throttle experimental features. More...

static System::String ^	DDS::BuiltinQosProfiles::PROFILE_GENERIC_MINIMAL_MEMORY_FOOTPRINT
	Uses a set of QoS which reduces the memory footprint of the application. More...

static System::String ^	DDS::BuiltinQosProfiles::PROFILE_PATTERN_PERIODIC_DATA
	Used for applications that expect periodic data. More...

static System::String ^	DDS::BuiltinQosProfiles::PROFILE_PATTERN_STREAMING
	Used for applications that stream data. More...

static System::String ^	DDS::BuiltinQosProfiles::PROFILE_PATTERN_RELIABLE_STREAMING
	Used for applications that stream data and require reliable communication. More...

static System::String ^	DDS::BuiltinQosProfiles::PROFILE_PATTERN_EVENT
	Used for applications that handle events. More...

static System::String ^	DDS::BuiltinQosProfiles::PROFILE_PATTERN_ALARM_EVENT
	Used for applications that handle alarm events. More...

static System::String ^	DDS::BuiltinQosProfiles::PROFILE_PATTERN_STATUS
	Used for applications whose samples represent statuses. More...

static System::String ^	DDS::BuiltinQosProfiles::PROFILE_PATTERN_ALARM_STATUS
	Used for applications in which samples represent alarm statuses. More...

static System::String ^	DDS::BuiltinQosProfiles::PROFILE_PATTERN_LAST_VALUE_CACHE
	Used for applications that only need the last published value. More...

static System::String ^	DDS::BuiltinQosProfiles::BUILTIN_QOS_SNIPPET_LIB
	A library of QoS Snippets. More...

static System::String ^	DDS::BuiltinQosProfiles::SNIPPET_OPTIMIZATION_RELIABILITY_PROTOCOL_COMMON
	QoS Snippet that configures the reliability protocol with a common configuration. More...

static System::String ^	DDS::BuiltinQosProfiles::SNIPPET_OPTIMIZATION_RELIABILITY_PROTOCOL_KEEP_ALL
	QoS Snippet that configures the reliability protocol for KEEP_ALL. More...

static System::String ^	DDS::BuiltinQosProfiles::SNIPPET_OPTIMIZATION_RELIABILITY_PROTOCOL_KEEP_LAST
	QoS Snippet that configures the reliability protocol for KEEP_LAST. More...

static System::String ^	DDS::BuiltinQosProfiles::SNIPPET_OPTIMIZATION_RELIABILITY_PROTOCOL_HIGH_RATE
	QoS Snippet that configures the reliability protocol for sending data at a high rate. More...

static System::String ^	DDS::BuiltinQosProfiles::SNIPPET_OPTIMIZATION_RELIABILITY_PROTOCOL_LOW_LATENCY
	QoS Snippet that configures the reliability protocol for sending data at low latency. More...

static System::String ^	DDS::BuiltinQosProfiles::SNIPPET_OPTIMIZATION_RELIABILITY_PROTOCOL_LARGE_DATA
	QoS Snippet that configures the reliability protocol for large data. More...

static System::String ^	DDS::BuiltinQosProfiles::SNIPPET_OPTIMIZATION_DATACACHE_LARGE_DATA_DYNAMICMEMALLOC
	Configures the DataWriter and DataReader caches to use dynamic memory allocation for Large Data samples. More...

static System::String ^	DDS::BuiltinQosProfiles::SNIPPET_OPTIMIZATION_DISCOVERY_COMMON
	QoS Snippet that optimizes discovery with a common configuration. More...

static System::String ^	DDS::BuiltinQosProfiles::SNIPPET_OPTIMIZATION_DISCOVERY_PARTICIPANT_COMPACT
	QoS Snippet that optimizes the Participant QoS to send less discovery information. More...

static System::String ^	DDS::BuiltinQosProfiles::SNIPPET_OPTIMIZATION_DISCOVERY_ENDPOINT_FAST
	QoS Snippet that optimizes the Endpoint Discovery to be faster. More...

static System::String ^	DDS::BuiltinQosProfiles::SNIPPET_OPTIMIZATION_TRANSPORT_LARGE_BUFFERS
	QoS Snippet that increases the Participant default buffer that shmem and udpv4 use. More...

static System::String ^	DDS::BuiltinQosProfiles::SNIPPET_QOS_POLICY_RELIABILITY_RELIABLE
	QoS Snippet that sets RELIABILITY QoS to RELIABLE. More...

static System::String ^	DDS::BuiltinQosProfiles::SNIPPET_QOS_POLICY_RELIABILITY_BEST_EFFORT
	QoS Snippet that sets RELIABILITY QoS to BEST_EFFORT. More...

static System::String ^	DDS::BuiltinQosProfiles::SNIPPET_QOS_POLICY_HISTORY_KEEP_LAST_1
	QoS Snippet that sets HISTORY QoS to KEEP_LAST kind with depth 1. More...

static System::String ^	DDS::BuiltinQosProfiles::SNIPPET_QOS_POLICY_HISTORY_KEEP_ALL
	QoS Snippet that sets HISTORY QosPolicy to KEEP_ALL kind. More...

static System::String ^	DDS::BuiltinQosProfiles::SNIPPET_QOS_POLICY_PUBLISH_MODE_ASYNCHRONOUS
	QoS Snippet that sets PUBLISH_MODE QosPolicy to ASYNCHRONOUS kind. More...

static System::String ^	DDS::BuiltinQosProfiles::SNIPPET_QOS_POLICY_DURABILITY_TRANSIENT_LOCAL
	QoS Snippet that sets DURABILITY QosPolicy to TRANSIENT_LOCAL kind. More...

static System::String ^	DDS::BuiltinQosProfiles::SNIPPET_QOS_POLICY_DURABILITY_TRANSIENT
	QoS Snippet that sets DURABILITY QosPolicy to TRANSIENT kind. More...

static System::String ^	DDS::BuiltinQosProfiles::SNIPPET_QOS_POLICY_DURABILITY_PERSISTENT
	QoS Snippet that sets DURABILITY QosPolicy to PERSISTENT kind. More...

static System::String ^	DDS::BuiltinQosProfiles::SNIPPET_QOS_POLICY_BATCHING_ENABLE
	QoS Snippet that sets BATCH QosPolicy to true. More...

static System::String ^	DDS::BuiltinQosProfiles::SNIPPET_FEATURE_FLOW_CONTROLLER_838MBPS
	QoS Snippet that configures and set a FlowController of 838 Mbps. More...

static System::String ^	DDS::BuiltinQosProfiles::SNIPPET_FEATURE_FLOW_CONTROLLER_209MBPS
	QoS Snippet that configures and sets a FlowController of 209 Mbps. More...

static System::String ^	DDS::BuiltinQosProfiles::SNIPPET_FEATURE_FLOW_CONTROLLER_52MBPS
	QoS Snippet that configures and sets a FlowController of 52 Mbps. More...

static System::String ^	DDS::BuiltinQosProfiles::SNIPPET_FEATURE_AUTO_TUNING_ENABLE
	QoS Snippet that enables auto_throttle and turbo_mode to true. More...

static System::String ^	DDS::BuiltinQosProfiles::SNIPPET_FEATURE_MONITORING_ENABLE
	QoS Snippet that enables the use of the RTI Monitoring Library. More...

static System::String ^	DDS::BuiltinQosProfiles::SNIPPET_FEATURE_SECURITY_ENABLE
	QoS Snippet that enables security using the Builtin Security Plugins. More...

static System::String ^	DDS::BuiltinQosProfiles::SNIPPET_FEATURE_TOPIC_QUERY_ENABLE
	QoS Snippet that enables Topic Query. More...

static System::String ^	DDS::BuiltinQosProfiles::SNIPPET_TRANSPORT_TCP_LAN_CLIENT
	QoS Snippet that configures a TCP LAN Client over DDS. More...

static System::String ^	DDS::BuiltinQosProfiles::SNIPPET_TRANSPORT_TCP_WAN_SYMMETRIC_CLIENT
	QoS Snippet that configures a symmetric WAN TCP Client over DDS. More...

static System::String ^	DDS::BuiltinQosProfiles::SNIPPET_TRANSPORT_TCP_WAN_ASYMMETRIC_SERVER
	QoS Snippet that an asymmetric WAN TCP Server over DDS. More...

static System::String ^	DDS::BuiltinQosProfiles::SNIPPET_TRANSPORT_TCP_WAN_ASYMMETRIC_CLIENT
	QoS Snippet that configures an asymmetric WAN TCP Client over DDS. More...

static System::String ^	DDS::BuiltinQosProfiles::SNIPPET_COMPATIBILITY_CONNEXT_MICRO_VERSION_2_4_3
	QoS Snippet that configures sets LIVELINESS QoS to be compatible with RTI Connext Micro 2.4.3. More...

static System::String ^	DDS::BuiltinQosProfiles::SNIPPET_COMPATIBILITY_OTHER_DDS_VENDORS_ENABLE
	QoS Snippet that configures RTI Connext to interoperate with other DDS vendors. More...

static System::String ^	DDS::BuiltinQosProfiles::SNIPPET_5_1_0_TRANSPORT_ENABLE
	QoS Snippet that configures RTI Connext to interoperate with RTI Connext 5.1.0 and below for UDPv6 and SHMEM transports. More...

Detailed Description

<<extension>> QoS libraries, profiles, and snippets that are automatically built into RTI Connext.

The built-in profiles can be accessed in QoS XML configuration files and by using any of the APIs that accept library and profiles names by using the constants or string versions as documented on this page.

The built-in profiles are provided as a way to quickly and easily configure RTI Connext applications with a set of QoS values aimed at achieving a specific behavior.

There are three built-in QoS libraries:

BuiltinQosLib: A library containing built-in QoS Profiles.

BuiltinQosLibExp: A library containing experimental QoS Profiles. Experimental QoS Profiles are new QoS Profiles that have been tested internally but have not gone through an extensive validation period. Therefore, some of the settings may change in future releases based on customer and internal feedback. After validation, experimental QoS Profiles will be moved into the non-experimental library.

BuiltinQosSnippetLib: A library containing QoS Snippets that are ready to use as elements for the QoS Profile composition pattern. For further information about this pattern visit the following article: https://community.rti.com/best-practices/qos-profile-inheritance-and-composition-guidance

There are three types of profiles:

Baseline.X.X.X: These profiles represent the QoS defaults for /ndds version X.X.X. To access the defaults for the latest RTI Connext version, use the BuiltinQosLib::Baseline profile.
Generic.X: These profiles allow you to easily configure different features and communication use-cases with RTI Connext. For example, there is a Generic.StrictReliable profile for use when your application has a requirement for no data loss.
Pattern.X: These profiles inherit from the Generic.X profiles and allow you to configure various domain-specific communication use cases. For example, there is a Pattern.Alarm profile that can be used to manage the generation and consumption of alarm events.

There are several types of QoS Snippets. These are the current QoS Snippets available:

Optimization.X: these QoS Snippets optimize one or more parameters related to the X QoS Policy or a specific use-case.
QosPolicy.X.Y: these QoS Snippets set a specific QoS Policy X to the value Y.
Feature.X: these QoS Snippets set all the needed QoS values to enable/modify a specific feature.
Transport.X: these QoS Snippets set a specific transport defined by X. This transport may have specific scenarios that are also specified in the name.
Compatibility.X: these QoS Snippets change the specific QoS policies to ensure compatibility with specific products or versions specified by X.

These QoS Profiles can be used as base profiles in XML configuration, then QoS Snippets can modify specific aspects of this base QoS Profile, and finally files and values can be modified to fit a specific system's needs. For example:

<qos_profile name="MyProfile" base_name="BuiltinQosLib::Generic.Common">
    <domain_participant_qos base_name="BuiltinQosLib::Generic.Monitoring.Common">
      <base_name>
        <element>BuiltinQosSnippetLib::Feature.Monitoring.Enable</element>
      </base_name>
      <!-- Override and add values -->
    </domain_participant_qos>
 </qos_profile>          

The QoS Profiles can also be used in any APIs that call for a QoS library and profile name, for example, the create_*_with_profile() APIs. To create a DDS::DataWriter configured to send large data:

writer = DDS_DomainParticipant_create_datawriter_with_profile(
                  participant, topic, 
                  DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB, 
                  DDS::BuiltinQosProfiles::PROFILE_GENERIC_STRICT_RELIABLE_LARGE_DATA_FAST_FLOW, 
                  NULL, DDS::StatusMask::STATUS_MASK_NONE); 

All the built-in QoS Profiles and QoS Snippets are documented in the BaselineRoot.documentationONLY.xml and BuiltinProfiles.documentationONLY.xml files that are included in the NDDSHOME/xml directory of the RTI Connext installation.

BaselineRoot.documentationONLY.xml contains the root baseline QoS profile that corresponds to the default values of RTI Connext 5.0.0.

BuiltinProfiles.documentationONLY.xml contains the rest of the built-in Qos Profiles and QoS Snippets.

Variable Documentation

◆ BUILTIN_QOS_LIB

System::String ^ DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB

static

A library of non-experimental QoS profiles.

String-version: "BuiltinQosLib"

◆ PROFILE_BASELINE_ROOT

System::String ^ DDS::BuiltinQosProfiles::PROFILE_BASELINE_ROOT

static

The root baseline QoS values from which all other Baseline.X.X.X profiles inherit.

This profile contains the root baseline QoS values from which all other Baseline.X.X.X profiles inherit. These values correspond to the default values for RTI Connext 5.0.0.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB

String-version: "Baseline.Root"

◆ PROFILE_BASELINE

System::String ^ DDS::BuiltinQosProfiles::PROFILE_BASELINE

static

The most up-to-date QoS default values.

You can use this profile if you want your application to pick up and use any new QoS default settings each time a new RTI Connext version is released – without changing your application code.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB

String-version: "Baseline"

◆ PROFILE_BASELINE_5_0_0

System::String ^ DDS::BuiltinQosProfiles::PROFILE_BASELINE_5_0_0

static

The QoS default values for version 5.0.0.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB

String-version: "Baseline.5.0.0"

◆ PROFILE_BASELINE_5_1_0

System::String ^ DDS::BuiltinQosProfiles::PROFILE_BASELINE_5_1_0

static

The QoS default values for version 5.1.0.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB

String-version: "Baseline.5.1.0"

◆ PROFILE_BASELINE_5_2_0

System::String ^ DDS::BuiltinQosProfiles::PROFILE_BASELINE_5_2_0

static

The QoS default values for version 5.2.0.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB

String-version: "Baseline.5.2.0"

◆ PROFILE_BASELINE_5_3_0

System::String ^ DDS::BuiltinQosProfiles::PROFILE_BASELINE_5_3_0

static

The QoS default values for version 5.3.0.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB

String-version: "Baseline.5.3.0"

◆ PROFILE_BASELINE_6_0_0

System::String ^ DDS::BuiltinQosProfiles::PROFILE_BASELINE_6_0_0

static

The QoS default values for version 6.0.0.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB

String-version: "Baseline.6.0.0"

◆ PROFILE_BASELINE_6_1_0

System::String ^ DDS::BuiltinQosProfiles::PROFILE_BASELINE_6_1_0

static

The QoS default values for version 6.1.0.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB

String-version: "Baseline.6.1.0"

◆ PROFILE_GENERIC_COMMON

System::String ^ DDS::BuiltinQosProfiles::PROFILE_GENERIC_COMMON

static

A common Participant base profile.

All Generic.X and Pattern.X profiles inherit from this profile.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB

String-version: "Generic.Common"

◆ PROFILE_GENERIC_MONITORING_COMMON

System::String ^ DDS::BuiltinQosProfiles::PROFILE_GENERIC_MONITORING_COMMON

static

Enables RTI Monitoring Library.

Generic Base participant QoS Profile that enables RTI Monitoring Library.

Use of this QoS Profile is deprecated. It is included for backwards compatibility.

Instead of using the (deprecated) "BuiltinQosLib::Generic.Monitoring.Common", apply the QoS Snippet "BuiltinQosSnippetLib::Feature.Monitoring.Enable" via composition. For example:

<qos_profile name="MyProfile">
     <base_name>
         <element>BuiltinQosSnippetLib::Feature.Monitoring.Enable</element>
     </base_name>
 </qos_profile>

Legacy applications may use this QoS Profile via inheritance. To do this, create a derived QoS Profile that inherits from this one. For example:

<qos_profile name="MyProfile" base_name="BuiltinQosLib::Generic.StrictReliable">
     <domain_participant_qos base_name="BuiltinQosLib::Generic.Monitoring.Common">
 </qos_profile>

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB

String-version: "Generic.Monitoring.Common"

◆ PROFILE_GENERIC_CONNEXT_MICRO_COMPATIBILITY

System::String ^ DDS::BuiltinQosProfiles::PROFILE_GENERIC_CONNEXT_MICRO_COMPATIBILITY

static

Sets the values necessary to communicate with RTI Connext Micro.

This profile will always represent the QoS values required for interoperability between the most recent version of RTI Connext Micro at the time of release of the most recent version of RTI Connext.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB

String-version: "Generic.ConnextMicroCompatibility"

◆ PROFILE_GENERIC_CONNEXT_MICRO_COMPATIBILITY_2_4_9

System::String ^ DDS::BuiltinQosProfiles::PROFILE_GENERIC_CONNEXT_MICRO_COMPATIBILITY_2_4_9

static

Sets the values necessary to communicate with RTI Connext Micro versions 2.4.4 through at least 2.4.9.

At the time of the release of RTI Connext 5.3.0 it was not necessary to set any QoS values in order to interoperate with RTI Connext Micro. This applies to RTI Connext Micro versions 2.4.4 and later. The most recent version of RTI Connext Micro at the time of release of RTI Connext 5.3.0 was 2.4.9. There is no guarantee that this profile will interoperate with versions of RTI Connext Micro after 2.4.9.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB

String-version: "Generic.ConnextMicroCompatibility.2.4.9"

◆ PROFILE_GENERIC_CONNEXT_MICRO_COMPATIBILITY_2_4_3

System::String ^ DDS::BuiltinQosProfiles::PROFILE_GENERIC_CONNEXT_MICRO_COMPATIBILITY_2_4_3

static

Sets the values necessary to communicate with RTI Connext Micro versions 2.4.3 and ealier.

RTI Connext Micro versions 2.4.3 and earlier only supported the MANUAL_BY_TOPIC_LIVELINESS_QOS LivelinessQos kind. In order to be compatible with these versions of RTI Connext Micro, the DDS::DataReader and DDS::DataWriter must have their Liveliness kind changed to this value because the default kind in RTI Connext is AUTOMATIC_LIVELINESS_QOS.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB

String-version: "Generic.ConnextMicroCompatibility.2.4.3"

◆ PROFILE_GENERIC_OTHER_DDS_VENDOR_COMPATIBILITY

System::String ^ DDS::BuiltinQosProfiles::PROFILE_GENERIC_OTHER_DDS_VENDOR_COMPATIBILITY

static

Sets the values necessary to interoperate with other DDS vendors.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB

String-version: "Generic.OtherDDSVendorCompatibility"

◆ PROFILE_GENERIC_510_TRANSPORT_COMPATIBILITY

System::String ^ DDS::BuiltinQosProfiles::PROFILE_GENERIC_510_TRANSPORT_COMPATIBILITY

static

Sets the values necessary to interoperate with RTI Connext 5.1.0 using the UDPv6 and/or SHMEM transports.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB

String-version: "Generic.510TransportCompatibility"

◆ PROFILE_GENERIC_SECURITY

System::String ^ DDS::BuiltinQosProfiles::PROFILE_GENERIC_SECURITY

static

Loads the DDS Secure builtin plugins.

Generic Base Participant Profile that enables the builtin DDS Security Plugins.

Use of this QoS Profile is deprecated. It is included for backwards compatibility.

Instead of using the (deprecated) "BuiltinQosLib::Generic.Security", apply the QoS Snippet "BuiltinQosSnippetLib::Feature.Security.Enable" via composition. For example:

<qos_profile name="MyProfile">
     <base_name>
         <element>BuiltinQosSnippetLib::Feature.Security.Enable</element>
     </base_name>
 </qos_profile>

Legacy applications may use this QoS Profile via inheritance. To do this, create a derived QoS Profile that inherits from this one. For example:

<qos_profile name="MyProfile" base_name="BuiltinQosLib::Generic.StrictReliable">
     <domain_participant_qos base_name="BuiltinQosLib::Generic.Security">
 </qos_profile>

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB

String-version: "Generic.Security"

◆ BUILTIN_QOS_LIB_EXP

System::String ^ DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB_EXP

static

A library of experimental QoS profiles.

Experimental profiles are new profiles that have been tested internally but have not gone through an extensive validation period. Therefore some of the settings may change in future releases based on customer and internal feedback. After validation, experimental profiles will be moved into the non-experimental library.

QoS Profiles in this library are deprecated. They have been moved to "BuiltinQosLib". You should use the QoS Profiles from "BuiltinQosLib" instead of the ones in "BuiltinQosLibExp". The experimental profiles are still defined here to avoid backward compatibility issues.

String-version: "BuiltinQosLibExp"

◆ PROFILE_GENERIC_STRICT_RELIABLE

System::String ^ DDS::BuiltinQosProfiles::PROFILE_GENERIC_STRICT_RELIABLE

static

Enables strict reliability.

Configures communication to be "strict reliable" where every sample is reliably delivered.

Combines the use of the DDS::ReliabilityQosPolicyKind::RELIABLE_RELIABILITY_QOS for DDS::ReliabilityQosPolicy with a KEEP_ALL_HISTORY_QOS for the DDS::HistoryQosPolicyKind.

This QoS Profile also optimizes the reliability protocol setting for this configuration.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB and DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB_EXP

String-version: "Generic.StrictReliable"

◆ PROFILE_GENERIC_KEEP_LAST_RELIABLE

System::String ^ DDS::BuiltinQosProfiles::PROFILE_GENERIC_KEEP_LAST_RELIABLE

static

Enables keep-last reliability.

Like the Generic.StrictReliable profile, this profile ensures in-order delivery of samples. However, new data can overwrite data that has not yet been acknowledged by the reader, therefore causing possible sample loss.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB and DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB_EXP

String-version: "Generic.KeepLastReliable"

◆ PROFILE_GENERIC_BEST_EFFORT

System::String ^ DDS::BuiltinQosProfiles::PROFILE_GENERIC_BEST_EFFORT

static

Enables best-effort reliability kind.

This profile enables best-effort communication. No effort or resources are spent to track whether or not sent samples are received. Minimal resources are used. This is the most deterministic method of sending data since there is no indeterministic delay that can be introduced by resending data. Data samples may be lost. This setting is good for periodic data.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB and DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB_EXP

String-version: "Generic.BestEffort"

◆ PROFILE_GENERIC_STRICT_RELIABLE_HIGH_THROUGHPUT

System::String ^ DDS::BuiltinQosProfiles::PROFILE_GENERIC_STRICT_RELIABLE_HIGH_THROUGHPUT

static

A profile that can be used to achieve high throughput.

This QoS Profile extends the DDS::BuiltinQosProfiles::PROFILE_GENERIC_STRICT_RELIABLE QoS Profile to perform additional, fine-grained performance tuning specific to applications that send continuously streaming data. The parameters specified here add to and/or override the parameters specified in the DDS::BuiltinQosProfiles::PROFILE_GENERIC_STRICT_RELIABLE QoS Profile..

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB and DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB_EXP

String-version: "Generic.StrictReliable.HighThroughput"

◆ PROFILE_GENERIC_STRICT_RELIABLE_LOW_LATENCY

System::String ^ DDS::BuiltinQosProfiles::PROFILE_GENERIC_STRICT_RELIABLE_LOW_LATENCY

static

A profile that can be used to achieve low latency.

This QoS Profile extends the DDS::BuiltinQosProfiles::PROFILE_GENERIC_STRICT_RELIABLE QoS Profile to perform additional, fine-grained performance tuning specific to applications that send continuously streaming data. The parameters specified here add to and/or override the parameters specified in the DDS::BuiltinQosProfiles::PROFILE_GENERIC_STRICT_RELIABLE QoS Profile.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB and DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB_EXP

String-version: "Generic.StrictReliable.LowLatency"

◆ PROFILE_GENERIC_PARTICIPANT_LARGE_DATA

System::String ^ DDS::BuiltinQosProfiles::PROFILE_GENERIC_PARTICIPANT_LARGE_DATA

static

A common Participant base profile to facilitate sending large data.

This is a common Participant base QoS Profile that configures 3 different flow controllers: 838, 209, and 52 Mbps that can each be used to throttle application data flow at different rates.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB and DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB_EXP

String-version: "Generic.Participant.LargeData"

◆ PROFILE_GENERIC_PARTICIPANT_LARGE_DATA_MONITORING

System::String ^ DDS::BuiltinQosProfiles::PROFILE_GENERIC_PARTICIPANT_LARGE_DATA_MONITORING

static

Configures Participants for large data and monitoring.

This is a common base Participant QoS Profile to configure Participants to both handle large data and use RTI Monitoring Library.

This QoS Profile is deprecated. It is included for backwards compatibility.

It is recommended that instead of inheriting from this QoS Profile, new applications apply the following QoS Snippets to their application-specific QoS Profiles:

Enable Monitoring

DDS::BuiltinQosProfiles::SNIPPET_FEATURE_MONITORING_ENABLE

Enable Large Data + optimizations

String-version: "Generic.Participant.LargeData.Monitoring"

See also: DDS::BuiltinQosProfiles::PROFILE_GENERIC_PARTICIPANT_LARGE_DATA; DDS::BuiltinQosProfiles::PROFILE_GENERIC_MONITORING_COMMON

◆ PROFILE_GENERIC_STRICT_RELIABLE_LARGE_DATA

System::String ^ DDS::BuiltinQosProfiles::PROFILE_GENERIC_STRICT_RELIABLE_LARGE_DATA

static

Configures endpoints for sending large data with strict reliability.

This QoS Profile extends the DDS::BuiltinQosProfiles::PROFILE_GENERIC_PARTICIPANT_LARGE_DATA QoS Profile to handle sending large samples. This QoS Profile optimizes memory usage per sample within RTI Connext, but it does not do any flow control. You can use this QoS Profile directly, which enables asynchronous publication with the default flow controller (i.e. no flow control) or you can use one of the three QoS Profiles below (Generic.StrictReliable.LargeData.*Flow), which uses this QoS Profile as a common base QoS Profile. Each of these three QoS Profiles uses one of the three flow controllers defined in DDS::BuiltinQosProfiles::PROFILE_GENERIC_PARTICIPANT_LARGE_DATA in order to throttle application data flow.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB and DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB_EXP

String-version: "Generic.StrictReliable.LargeData"

◆ PROFILE_GENERIC_KEEP_LAST_RELIABLE_LARGE_DATA

System::String ^ DDS::BuiltinQosProfiles::PROFILE_GENERIC_KEEP_LAST_RELIABLE_LARGE_DATA

static

Configures endpoints for sending large data with keep-last reliability.

This QoS Profile is similar to the DDS::BuiltinQosProfiles::PROFILE_GENERIC_PARTICIPANT_LARGE_DATA QoS Profile, but also adds QoS Snippets to handle sending large data. You can use this QoS Profile directly, which enables the default flow controller (i.e., no flow control) or you can choose one of the three QoS Profiles below (Generic.KeepLastReliable.LargeData.*Flow) which uses this QoS Profile as a common base QoS Profile. Each of these three QoS Profiles uses one of the three flow controllers defined in DDS::BuiltinQosProfiles::PROFILE_GENERIC_PARTICIPANT_LARGE_DATA in order to throttle application data flow.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB and DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB_EXP

String-version: "Generic.KeepLastReliable.LargeData"

◆ PROFILE_GENERIC_STRICT_RELIABLE_LARGE_DATA_FAST_FLOW

System::String ^ DDS::BuiltinQosProfiles::PROFILE_GENERIC_STRICT_RELIABLE_LARGE_DATA_FAST_FLOW

static

Configures strictly reliable communication for large data with a fast flow controller.

Strictly reliable communication for large data with a 838 Mbps (~ 100 MB/sec) flow controller.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB and DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB_EXP

String-version: "Generic.StrictReliable.LargeData.FastFlow"

◆ PROFILE_GENERIC_STRICT_RELIABLE_LARGE_DATA_MEDIUM_FLOW

System::String ^ DDS::BuiltinQosProfiles::PROFILE_GENERIC_STRICT_RELIABLE_LARGE_DATA_MEDIUM_FLOW

static

Configures strictly reliable communication for large data with a medium flow controller.

Strictly reliable communication for large data with a 209Mbps (~ 25 MB/sec) flow controller.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB and DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB_EXP

String-version: "Generic.StrictReliable.LargeData.MediumFlow"

◆ PROFILE_GENERIC_STRICT_RELIABLE_LARGE_DATA_SLOW_FLOW

System::String ^ DDS::BuiltinQosProfiles::PROFILE_GENERIC_STRICT_RELIABLE_LARGE_DATA_SLOW_FLOW

static

Configures strictly reliable communication for large data with a slow flow controller.

Strictly reliable communication for large data with a 52 MB/sec (~ 6.25 MB/sec) flow controller.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB and DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB_EXP

String-version: "Generic.StrictReliable.LargeData.SlowFlow"

◆ PROFILE_GENERIC_KEEP_LAST_RELIABLE_LARGE_DATA_FAST_FLOW

System::String ^ DDS::BuiltinQosProfiles::PROFILE_GENERIC_KEEP_LAST_RELIABLE_LARGE_DATA_FAST_FLOW

static

Configures keep-last reliable communication for large data with a fast flow controller.

Keep-last reliable communication for large data with a 838 Mbps (~ 100 MB/sec) flow controller.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB and DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB_EXP

String-version: "Generic.KeepLastReliable.LargeData.FastFlow"

◆ PROFILE_GENERIC_KEEP_LAST_RELIABLE_LARGE_DATA_MEDIUM_FLOW

System::String ^ DDS::BuiltinQosProfiles::PROFILE_GENERIC_KEEP_LAST_RELIABLE_LARGE_DATA_MEDIUM_FLOW

static

Configures keep-last reliable communication for large data with a medium flow controller.

Keep-last reliable communication for large data with a 209Mbps (~ 25 MB/sec) flow controller.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB and DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB_EXP

String-version: "Generic.KeepLastReliable.LargeData.MediumFlow"

◆ PROFILE_GENERIC_KEEP_LAST_RELIABLE_LARGE_DATA_SLOW_FLOW

System::String ^ DDS::BuiltinQosProfiles::PROFILE_GENERIC_KEEP_LAST_RELIABLE_LARGE_DATA_SLOW_FLOW

static

Configures keep-last reliable communication for large data with a slow flow controller.

Keep-last reliable communication for large data with a 52 MB/sec (~ 6.25 MB/sec) flow controller.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB and DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB_EXP

String-version: "Generic.KeepLastReliable.LargeData.SlowFlow"

◆ PROFILE_GENERIC_KEEP_LAST_RELIABLE_TRANSIENT_LOCAL

System::String ^ DDS::BuiltinQosProfiles::PROFILE_GENERIC_KEEP_LAST_RELIABLE_TRANSIENT_LOCAL

static

Persists the samples of a DataWriter as long as the entity exists.

This profile extends the DDS::BuiltinQosProfiles::PROFILE_GENERIC_KEEP_LAST_RELIABLE profile, but persists the samples of a DDS::DataWriter as long as the entity exists in order to deliver them to late-joining DataReaders.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB and DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB_EXP

String-version: "Generic.KeepLastReliable.TransientLocal"

◆ PROFILE_GENERIC_KEEP_LAST_RELIABLE_TRANSIENT

System::String ^ DDS::BuiltinQosProfiles::PROFILE_GENERIC_KEEP_LAST_RELIABLE_TRANSIENT

static

Persists samples using RTI Persistence Service.

This profile extends the DDS::BuiltinQosProfiles::PROFILE_GENERIC_KEEP_LAST_RELIABLE profile, but persists samples using Persistence Service in order to deliver them to late-joining DataReaders.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB and DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB_EXP

String-version: "Generic.KeepLastReliable.Transient"

◆ PROFILE_GENERIC_KEEP_LAST_RELIABLE_PERSISTENT

System::String ^ DDS::BuiltinQosProfiles::PROFILE_GENERIC_KEEP_LAST_RELIABLE_PERSISTENT

static

Persists samples in permanent storage, like a disk, using RTI Persistence Service.

This profile extends the DDS::BuiltinQosProfiles::PROFILE_GENERIC_KEEP_LAST_RELIABLE profile, but persists samples in permanent storage, such as a disk, using Persistence Service in order to deliver them to late-joining DataReaders.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB and DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB_EXP

String-version: "Generic.KeepLastReliable.Persistent"

◆ PROFILE_GENERIC_AUTO_TUNING

System::String ^ DDS::BuiltinQosProfiles::PROFILE_GENERIC_AUTO_TUNING

static

Enables the Turbo Mode batching and Auto Throttle experimental features.

Turbo Mode batching adjusts the maximum number of bytes of a batch based on how frequently samples are being written. Auto Throttle auto-adjusts the speed at which a writer will write samples, based on the number of unacknowledged samples in its queue.

These features are designed to auto-adjust the publishing behavior within a system in order to achieve the best possible performance with regards to throughput and latency.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB and DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB_EXP

String-version: "Generic.AutoTuning"

◆ PROFILE_GENERIC_MINIMAL_MEMORY_FOOTPRINT

System::String ^ DDS::BuiltinQosProfiles::PROFILE_GENERIC_MINIMAL_MEMORY_FOOTPRINT

static

Uses a set of QoS which reduces the memory footprint of the application.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB and DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB_EXP

String-version: "Generic.MinimalMemoryFootprint"

◆ PROFILE_PATTERN_PERIODIC_DATA

System::String ^ DDS::BuiltinQosProfiles::PROFILE_PATTERN_PERIODIC_DATA

static

Used for applications that expect periodic data.

This QoS Profile is intended to be used for applications that expect periodic data such as sensor data. The deadline that is set in this profile can be used to detect when DataWriters are not publishing data with the expected periodicity.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB and DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB_EXP

String-version: "Pattern.PeriodicData"

◆ PROFILE_PATTERN_STREAMING

System::String ^ DDS::BuiltinQosProfiles::PROFILE_PATTERN_STREAMING

static

Used for applications that stream data.

The data sent in streaming applications is commonly periodic. Therefore this profile simply inherits from the DDS::BuiltinQosProfiles::PROFILE_PATTERN_PERIODIC_DATA profile. Note: With this QoS Profile, the application may lose data, which may be acceptable in use cases such as video conferencing.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB and DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB_EXP

String-version: "Pattern.Streaming"

◆ PROFILE_PATTERN_RELIABLE_STREAMING

System::String ^ DDS::BuiltinQosProfiles::PROFILE_PATTERN_RELIABLE_STREAMING

static

Used for applications that stream data and require reliable communication.

Sometimes streaming applications require reliable communication while still tolerating some data loss. In this case, we inherit from the DDS::BuiltinQosProfiles::PROFILE_GENERIC_KEEP_LAST_RELIABLE QoS Profile and the following QoS Snippets:

This QoS Snippet also increases the DDS::HistoryQosPolicy::depth to reduce the probability of losing samples.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB and DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB_EXP

String-version: "Pattern.ReliableStreaming"

◆ PROFILE_PATTERN_EVENT

System::String ^ DDS::BuiltinQosProfiles::PROFILE_PATTERN_EVENT

static

Used for applications that handle events.

This QoS Profile can be used by applications in which samples represent events such as button pushes or alerts. When events are triggered, the system should almost always do something, meaning that you don't want the system to lose the event. This means that the system requires strictly reliable communication. To enable it, use the following QoS Snippets:

Since events and alerts are critical and non-periodic data, it is important to detect situations in which communication between a DDS::DataWriter and DDS::DataReader is broken. This is why this profile sets the DDS::LivelinessQosPolicy. If the DDS::DataWriter does not assert its liveliness in a timely manner, the DDS::DataReader will report 'loss of liveliness' to the application.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB and DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB_EXP

String-version: "Pattern.Event"

◆ PROFILE_PATTERN_ALARM_EVENT

System::String ^ DDS::BuiltinQosProfiles::PROFILE_PATTERN_ALARM_EVENT

static

Used for applications that handle alarm events.

An alarm is a type of event; therefore this profile simply inherits from DDS::BuiltinQosProfiles::PROFILE_PATTERN_EVENT.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB and DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB_EXP

String-version: "Pattern.AlarmEvent"

◆ PROFILE_PATTERN_STATUS

System::String ^ DDS::BuiltinQosProfiles::PROFILE_PATTERN_STATUS

static

Used for applications whose samples represent statuses.

This QoS Profile can be used by applications in which samples represent state variables whose values remain valid as long as they don't explicitly change. State variables typically do not change periodically. State variables and their values should also be available to applications that appear after the value originally changed because it is unreasonable to have to wait until the next change of state, which may be indeterminate.

Whether to use this QoS Profile or DDS::BuiltinQosProfiles::PROFILE_PATTERN_PERIODIC_DATA can often be an application choice. For example, if a DataWriter is publishing temperature sensor data, it could use the DDS::BuiltinQosProfiles::PROFILE_PATTERN_PERIODIC_DATA QoS Profile and publish the data at a fixed rate or it could use the DDS::BuiltinQosProfiles::PROFILE_PATTERN_STATUS QoS Profile and only publish the temperature when it changes more than 1 degree.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB and DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB_EXP

String-version: "Pattern.Status"

◆ PROFILE_PATTERN_ALARM_STATUS

System::String ^ DDS::BuiltinQosProfiles::PROFILE_PATTERN_ALARM_STATUS

static

Used for applications in which samples represent alarm statuses.

An alarm status is a type of status; therefore this QoS Profile simply inherits from DDS::BuiltinQosProfiles::PROFILE_PATTERN_STATUS.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB and DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB_EXP

String-version: "Pattern.AlarmStatus"

◆ PROFILE_PATTERN_LAST_VALUE_CACHE

System::String ^ DDS::BuiltinQosProfiles::PROFILE_PATTERN_LAST_VALUE_CACHE

static

Used for applications that only need the last published value.

With this QoS Profile, a DDS::DataWriter will keep in its queue the last value that was published for each sample instance. Late-joining DataReaders will get that value when they join the system. This QoS Profile inherits from DDS::BuiltinQosProfiles::PROFILE_GENERIC_KEEP_LAST_RELIABLE_TRANSIENT_LOCAL because the use case requires delivery to late-joiners.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB and DDS::BuiltinQosProfiles::BUILTIN_QOS_LIB_EXP

String-version: "Pattern.LastValueCache"

◆ BUILTIN_QOS_SNIPPET_LIB

System::String ^ DDS::BuiltinQosProfiles::BUILTIN_QOS_SNIPPET_LIB

static

A library of QoS Snippets.

String-version: "BuiltinQosSnippetLib"

◆ SNIPPET_OPTIMIZATION_RELIABILITY_PROTOCOL_COMMON

System::String ^ DDS::BuiltinQosProfiles::SNIPPET_OPTIMIZATION_RELIABILITY_PROTOCOL_COMMON

static

QoS Snippet that configures the reliability protocol with a common configuration.

The QoS Snippets starting with "Optimization.ReliabilityProtocol." provide alternative configurations of the same QoS Policies. Choose just one QoS Snippet of the alternatives when defining a new QoS Profile or QoS Snippet.

This QoS Snippet defines parameters common to a set of "alternative" QoS Snippets that configure the reliability protocol.

Modified QoS Parameters:

This QoS Snippet configures the reliability protocol parameters for more aggressive (faster) heartbeats so that sample loss is detected and repaired faster.

This QoS Snippet also sets the DDS::RtpsReliableWriterProtocol_t::max_heartbeat_retries, which works in combination with the heartbeat rate to determine when the DDS::DataWriter considers a DDS::DataReader non-responsive. This QoS Snippet configures the DDS::DataWriterProtocolQosPolicy::rtps_reliable_writer parameters so that the DDS::DataWriter considers the DDS::DataReader to be "inactive" after 500 unresponded heartbeats.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_SNIPPET_LIB

String-version: "Optimization.ReliabilityProtocol.Common"

◆ SNIPPET_OPTIMIZATION_RELIABILITY_PROTOCOL_KEEP_ALL

System::String ^ DDS::BuiltinQosProfiles::SNIPPET_OPTIMIZATION_RELIABILITY_PROTOCOL_KEEP_ALL

static

QoS Snippet that configures the reliability protocol for KEEP_ALL.

The QoS Snippets starting with "Optimization.ReliabilityProtocol." provide alternative configurations of the same QoS Policies. Choose just one QoS Snippet of the alternatives when defining a new QoS Profile or QoS Snippet.

This QoS Snippet optimizes the DDS::DataWriter reliable protocol parameters for a reliable DDS::DataWriter with DDS::HistoryQosPolicyKind set to KEEP_ALL_HISTORY_QOS.

Modified QoS Parameters:

Note that this QoS Snippet does not configure the DDS::ReliabilityQosPolicy or DDS::HistoryQosPolicy QoS policies. It is intended to be used in combination with other QoS Snippets that configure those policies.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_SNIPPET_LIB

String-version: "Optimization.ReliabilityProtocol.KeepAll"

◆ SNIPPET_OPTIMIZATION_RELIABILITY_PROTOCOL_KEEP_LAST

System::String ^ DDS::BuiltinQosProfiles::SNIPPET_OPTIMIZATION_RELIABILITY_PROTOCOL_KEEP_LAST

static

QoS Snippet that configures the reliability protocol for KEEP_LAST.

The QoS Snippets starting with "Optimization.ReliabilityProtocol." provide alternative configurations of the same QoS Policies. Choose just one QoS Snippet of the alternatives when defining a new QoS Profile or QoS Snippet.

This QoS Snippet optimizes the DDS::DataWriter reliable protocol parameters for a reliable DDS::DataWriter with DDS::HistoryQosPolicyKind set to KEEP_LAST_HISTORY_QOS.

Modified QoS Parameters:

Note that this QoS Snippet does not configure the DDS::ReliabilityQosPolicy or DDS::HistoryQosPolicy QoS policies. It is intended to be used in combination with other QoS Snippets that configure those policies.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_SNIPPET_LIB

String-version: "Optimization.ReliabilityProtocol.KeepLast"

◆ SNIPPET_OPTIMIZATION_RELIABILITY_PROTOCOL_HIGH_RATE

System::String ^ DDS::BuiltinQosProfiles::SNIPPET_OPTIMIZATION_RELIABILITY_PROTOCOL_HIGH_RATE

static

QoS Snippet that configures the reliability protocol for sending data at a high rate.

The QoS Snippets starting with "Optimization.ReliabilityProtocol." provide alternative configurations of the same QoS Policies. Choose just one QoS Snippet of the alternatives when defining a new QoS Profile or QoS Snippet.

This QoS Snippet optimizes the DDS::DataWriter reliable protocol parameters for a reliable DDS::DataWriter that is writing messages at high rates, especially in situations where throughput is favored over latency.

Modified QoS Parameters:

This QoS Snippet sets a fast rate of heartbeats so that errors are detected and repaired more swiftly.

Note that to get the highest thoughout you may need to apply additional changes to the final QoS Profile. See the QoS Profile DDS::BuiltinQosProfiles::PROFILE_GENERIC_STRICT_RELIABLE_HIGH_THROUGHPUT for further information.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_SNIPPET_LIB

String-version: "Optimization.ReliabilityProtocol.HighRate"

◆ SNIPPET_OPTIMIZATION_RELIABILITY_PROTOCOL_LOW_LATENCY

System::String ^ DDS::BuiltinQosProfiles::SNIPPET_OPTIMIZATION_RELIABILITY_PROTOCOL_LOW_LATENCY

static

QoS Snippet that configures the reliability protocol for sending data at low latency.

The QoS Snippets starting with "Optimization.ReliabilityProtocol." provide alternative configurations of the same QoS Policies. Choose just one QoS Snippet of the alternatives when defining a new QoS Profile or QoS Snippet.

This QoS Snippet modifies the Reliable Protocol parameters to accomplish low latency.

Modified QoS Parameters:

Note that to get the lowest latency you may need to apply additional changes to the final QoS Profile. See the QoS Profile DDS::BuiltinQosProfiles::PROFILE_GENERIC_STRICT_RELIABLE_LOW_LATENCY for further information.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_SNIPPET_LIB

String-version: "Optimization.ReliabilityProtocol.LowLatency"

◆ SNIPPET_OPTIMIZATION_RELIABILITY_PROTOCOL_LARGE_DATA

System::String ^ DDS::BuiltinQosProfiles::SNIPPET_OPTIMIZATION_RELIABILITY_PROTOCOL_LARGE_DATA

static

QoS Snippet that configures the reliability protocol for large data.

The QoS Snippets starting with "Optimization.ReliabilityProtocol." provide alternative configurations of the same QoS Policies. Choose just one QoS Snippet of the alternatives when defining a new QoS Profile or QoS Snippet.

Modifies the Reliable Protocol parameters and Resource Limits to work with Large Data.

Modified QoS Parameters:

Note that to send large data you need to apply additional changes that configure the data caches, asynchronous writing, transport buffers, etc. See, for example, DDS::BuiltinQosProfiles::PROFILE_GENERIC_KEEP_LAST_RELIABLE_LARGE_DATA, and derivatives for fully functional Large Data QoS Profiles.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_SNIPPET_LIB

String-version: "Optimization.ReliabilityProtocol.LargeData"

◆ SNIPPET_OPTIMIZATION_DATACACHE_LARGE_DATA_DYNAMICMEMALLOC

System::String ^ DDS::BuiltinQosProfiles::SNIPPET_OPTIMIZATION_DATACACHE_LARGE_DATA_DYNAMICMEMALLOC

static

Configures the DataWriter and DataReader caches to use dynamic memory allocation for Large Data samples.

Modified QoS Parameters:

DDS::DataWriterQos => DDS::ResourceLimitsQosPolicy
DDS::DataWriterQos => DDS::PropertyQosPolicy named "dds.data_writer.history.memory_manager.*"
DDS::DataReaderQos => DDS::ResourceLimitsQosPolicy
DDS::DataReaderResourceLimitsQosPolicy
DDS::DataReaderQos => DDS::PropertyQosPolicy named "dds.data_reader.history.memory_manager.*"

This configuration is needed to handle data that contains unbounded sequences or strings. This QoS Snippet is also recommended if samples can have very different sizes and the bigger samples can be very large.

If dynamic memory allocation is not used for the larger samples, then all samples are allocated to their maximum size which can consume a lot of resources.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_SNIPPET_LIB

String-version: "Optimization.DataCache.LargeData.DynamicMemAlloc"

◆ SNIPPET_OPTIMIZATION_DISCOVERY_COMMON

System::String ^ DDS::BuiltinQosProfiles::SNIPPET_OPTIMIZATION_DISCOVERY_COMMON

static

QoS Snippet that optimizes discovery with a common configuration.

Optimizes the DDS::DomainParticipantQos to detect faster discovery changes. This QoS Snippet increases the speed moderately so that it fits the normal scenarios.

Modified QoS Parameters:

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_SNIPPET_LIB

String-version: "Optimization.Discovery.Common"

◆ SNIPPET_OPTIMIZATION_DISCOVERY_PARTICIPANT_COMPACT

System::String ^ DDS::BuiltinQosProfiles::SNIPPET_OPTIMIZATION_DISCOVERY_PARTICIPANT_COMPACT

static

QoS Snippet that optimizes the Participant QoS to send less discovery information.

Modified QoS Parameters:

DDS::DomainParticipantQos => DDS::PropertyQosPolicy named "dds.participant.inter_participant.*"
DDS::DomainParticipantQos => DDS::PropertyQosPolicy named "dds.sys_info.*"

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_SNIPPET_LIB

String-version: "Optimization.Discovery.Participant.Compact"

◆ SNIPPET_OPTIMIZATION_DISCOVERY_ENDPOINT_FAST

System::String ^ DDS::BuiltinQosProfiles::SNIPPET_OPTIMIZATION_DISCOVERY_ENDPOINT_FAST

static

QoS Snippet that optimizes the Endpoint Discovery to be faster.

This is useful when using security, to prevent a noticeable delay.

Modified QoS Parameters:

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_SNIPPET_LIB

String-version: "Optimization.Discovery.Endpoint.Fast"

◆ SNIPPET_OPTIMIZATION_TRANSPORT_LARGE_BUFFERS

System::String ^ DDS::BuiltinQosProfiles::SNIPPET_OPTIMIZATION_TRANSPORT_LARGE_BUFFERS

static

QoS Snippet that increases the Participant default buffer that shmem and udpv4 use.

This is useful when using Large Data

Modified QoS Parameters:

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_SNIPPET_LIB

String-version: "Optimization.Transport.LargeBuffers"

◆ SNIPPET_QOS_POLICY_RELIABILITY_RELIABLE

System::String ^ DDS::BuiltinQosProfiles::SNIPPET_QOS_POLICY_RELIABILITY_RELIABLE

static

QoS Snippet that sets RELIABILITY QoS to RELIABLE.

This also configures a blocking time in case the DDS::DataWriter writes faster than the DataReaders can accommodate.

Modified QoS Parameters:

Note that by itself enabling reliability does not ensure that every sample written is delivered to the DataReaders. This is because the DDS::DataWriter and/or DDS::DataReader can be configured to override samples in its cache based on the configuration of the DDS::HistoryQosPolicy QoS policy.

To ensure delivery of every sample (at the expense of potentially blocking the DDS::DataWriter), use the QoS Profile DDS::BuiltinQosProfiles::PROFILE_GENERIC_STRICT_RELIABLE or one of the derived QoS Profiles.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_SNIPPET_LIB

String-version: "QosPolicy.Reliability.Reliable"

◆ SNIPPET_QOS_POLICY_RELIABILITY_BEST_EFFORT

System::String ^ DDS::BuiltinQosProfiles::SNIPPET_QOS_POLICY_RELIABILITY_BEST_EFFORT

static

QoS Snippet that sets RELIABILITY QoS to BEST_EFFORT.

Modified QoS Parameters:

With best-effort, there are no resources spent to confirm delivery of samples nor repairs of any samples that may be lost.

Best-effort communication reduces jitter; therefore, the delay between sending data and receiving it is more deterministic for the samples that are actually received. Best-effort is good for periodic data where it may be better to get the next value than to wait for the previous one to be repaired.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_SNIPPET_LIB

String-version: "QosPolicy.Reliability.BestEffort"

◆ SNIPPET_QOS_POLICY_HISTORY_KEEP_LAST_1

System::String ^ DDS::BuiltinQosProfiles::SNIPPET_QOS_POLICY_HISTORY_KEEP_LAST_1

static

QoS Snippet that sets HISTORY QoS to KEEP_LAST kind with depth 1.

Modified QoS Parameters:

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_SNIPPET_LIB

String-version: "QosPolicy.History.KeepLast_1"

◆ SNIPPET_QOS_POLICY_HISTORY_KEEP_ALL

System::String ^ DDS::BuiltinQosProfiles::SNIPPET_QOS_POLICY_HISTORY_KEEP_ALL

static

QoS Snippet that sets HISTORY QosPolicy to KEEP_ALL kind.

Modified QoS Parameters:

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_SNIPPET_LIB

String-version: "QosPolicy.History.KeepAll"

◆ SNIPPET_QOS_POLICY_PUBLISH_MODE_ASYNCHRONOUS

System::String ^ DDS::BuiltinQosProfiles::SNIPPET_QOS_POLICY_PUBLISH_MODE_ASYNCHRONOUS

static

QoS Snippet that sets PUBLISH_MODE QosPolicy to ASYNCHRONOUS kind.

Modified QoS Parameters:

DDS::PublishModeQosPolicy

Asynchronous Publish mode decouples the application thread that calls the DDS::DataWriter "write" operation from the thread used to send the data on the network. See https://community.rti.com/glossary/asynchronous-writer

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_SNIPPET_LIB

String-version: "QosPolicy.PublishMode.Asynchronous"

◆ SNIPPET_QOS_POLICY_DURABILITY_TRANSIENT_LOCAL

System::String ^ DDS::BuiltinQosProfiles::SNIPPET_QOS_POLICY_DURABILITY_TRANSIENT_LOCAL

static

QoS Snippet that sets DURABILITY QosPolicy to TRANSIENT_LOCAL kind.

Modified QoS Parameters:

DataWriters will store and send previously published DDS samples for delivery to newly discovered DataReaders as long as the DDS::DataWriter still exists. For this setting to be effective, you must also set the DDS::ReliabilityQosPolicyKind to DDS::ReliabilityQosPolicyKind::RELIABLE_RELIABILITY_QOS (not Best Effort). Which particular DDS samples are kept depends on other QoS settings such as DDS::HistoryQosPolicy and DDS::ResourceLimitsQosPolicy.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_SNIPPET_LIB

String-version: "QosPolicy.Durability.TransientLocal"

◆ SNIPPET_QOS_POLICY_DURABILITY_TRANSIENT

System::String ^ DDS::BuiltinQosProfiles::SNIPPET_QOS_POLICY_DURABILITY_TRANSIENT

static

QoS Snippet that sets DURABILITY QosPolicy to TRANSIENT kind.

Modified QoS Parameters:

RTI Connext will store previously published DDS samples in memory using Persistence Service, which will send the stored data to newly discovered DataReaders. Which particular DDS samples are kept and sent by Persistence Service depends on the DDS::HistoryQosPolicy and DDS::ResourceLimitsQosPolicy of the Persistence Service DataWriters. These QosPolicies can be configured in the Persistence Service configuration file or through the DDS::DurabilityQosPolicyKind of the DataWriters configured with TRANSIENT_DURABILITY_QOS.

You need a Persistence Service instance running to use this behavior.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_SNIPPET_LIB

String-version: "QosPolicy.Durability.Transient"

◆ SNIPPET_QOS_POLICY_DURABILITY_PERSISTENT

System::String ^ DDS::BuiltinQosProfiles::SNIPPET_QOS_POLICY_DURABILITY_PERSISTENT

static

QoS Snippet that sets DURABILITY QosPolicy to PERSISTENT kind.

Modified QoS Parameters:

RTI Connext will store previously published DDS samples in permanent storage, like a disk, using Persistence Service, which will send the stored data to newly discovered DataReaders. Which particular DDS samples are kept and sent by Persistence Service depends on the DDS::HistoryQosPolicy and DDS::ResourceLimitsQosPolicy in the Persistence Service DataWriters. These QosPolicies can be configured in the Persistence Service configuration file or through the DDS::DurabilityQosPolicyKind of the DataWriters configured with PERSISTENT_DURABILITY_QOS.

You need a Persistence Service instance running to use this behavior.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_SNIPPET_LIB

String-version: "QosPolicy.Durability.Persistent"

◆ SNIPPET_QOS_POLICY_BATCHING_ENABLE

System::String ^ DDS::BuiltinQosProfiles::SNIPPET_QOS_POLICY_BATCHING_ENABLE

static

QoS Snippet that sets BATCH QosPolicy to true.

Modified QoS Parameters:

DDS::BatchQosPolicy

This QoS Snippet specifies and configures the mechanism that allows RTI Connext to collect multiple user data DDS samples to be sent in a single network packet, to take advantage of the efficiency of sending larger packets and thus increase effective throughput.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_SNIPPET_LIB

String-version: "QosPolicy.Batching.Enable"

◆ SNIPPET_FEATURE_FLOW_CONTROLLER_838MBPS

System::String ^ DDS::BuiltinQosProfiles::SNIPPET_FEATURE_FLOW_CONTROLLER_838MBPS

static

QoS Snippet that configures and set a FlowController of 838 Mbps.

Defines a DDS::FlowController and configures the DDS::DataWriterQos with it.

This is a DDS::FlowController of 838 Mbps (~ 100 MB/sec)

Modified QoS Parameters:

DDS::DomainParticipantQos => DDS::PropertyQosPolicy named "dds.flow_controller.token_bucket.*"
DDS::PublishModeQosPolicy

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_SNIPPET_LIB

String-version: "Feature.FlowController.838Mbps"

◆ SNIPPET_FEATURE_FLOW_CONTROLLER_209MBPS

System::String ^ DDS::BuiltinQosProfiles::SNIPPET_FEATURE_FLOW_CONTROLLER_209MBPS

static

QoS Snippet that configures and sets a FlowController of 209 Mbps.

Defines a DDS::FlowController and configures the DDS::DataWriterQos with it.

This is a DDS::FlowController of 209 Mbps (~ 25 MB/sec)

Modified QoS Parameters:

DDS::DomainParticipantQos => DDS::PropertyQosPolicy named "dds.flow_controller.token_bucket.*"
DDS::PublishModeQosPolicy

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_SNIPPET_LIB

String-version: "Feature.FlowController.209Mbps"

◆ SNIPPET_FEATURE_FLOW_CONTROLLER_52MBPS

System::String ^ DDS::BuiltinQosProfiles::SNIPPET_FEATURE_FLOW_CONTROLLER_52MBPS

static

QoS Snippet that configures and sets a FlowController of 52 Mbps.

Defines a DDS::FlowController and configures the DDS::DataWriterQos with it.

This is a DDS::FlowController of 52 Mbps (~ 6.25 MB/sec)

Modified QoS Parameters:

DDS::DomainParticipantQos => DDS::PropertyQosPolicy named "dds.flow_controller.token_bucket.*"
DDS::PublishModeQosPolicy

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_SNIPPET_LIB

String-version: "Feature.FlowController.52Mbps"

◆ SNIPPET_FEATURE_AUTO_TUNING_ENABLE

System::String ^ DDS::BuiltinQosProfiles::SNIPPET_FEATURE_AUTO_TUNING_ENABLE

static

QoS Snippet that enables auto_throttle and turbo_mode to true.

Sets the DDS::DomainParticipantQos properties to enable auto_throttle and turbo_mode to true.

Modified QoS Parameters:

DDS::DomainParticipantQos => DDS::PropertyQosPolicy named "dds.domain_participant.auto_throttle"
DDS::DataWriterQos => DDS::PropertyQosPolicy named "dds.data_writer.auto_throttle.enable"
DDS::DataWriterQos => DDS::PropertyQosPolicy named "dds.data_writer.enable_turbo_mode"

The domain_participant.auto_throttle configures the DDS::DomainParticipant to gather internal measurements (during DDS::DomainParticipant creation) that are required for the Auto Throttle feature. This allows DataWriters belonging to this DDS::DomainParticipant to use the Auto Throttle feature.

The turbo_mode adjusts the batch max_data_bytes based on how frequently the DDS::DataWriter writes data.

Data_writer.auto_throttle enables automatic throttling in the DDS::DataWriter so it can automatically adjust the writing rate and the send window size; this minimizes the need for repairing DDS samples and improves latency.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_SNIPPET_LIB

String-version: "Feature.AutoTuning.Enable"

◆ SNIPPET_FEATURE_MONITORING_ENABLE

System::String ^ DDS::BuiltinQosProfiles::SNIPPET_FEATURE_MONITORING_ENABLE

static

QoS Snippet that enables the use of the RTI Monitoring Library.

To enable the use of RTI Monitoring Library apply this QoS Snippet to the QoS Profile used to create your DDS::DomainParticipant. For example:

<qos_profile name="MyProfile">
     <base_name>
         <element>BuiltinQosLib::Feature.Monitoring.Enable</element>
     </base_name>
 </qos_profile>

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_SNIPPET_LIB

String-version: "Feature.Monitoring.Enable"

◆ SNIPPET_FEATURE_SECURITY_ENABLE

System::String ^ DDS::BuiltinQosProfiles::SNIPPET_FEATURE_SECURITY_ENABLE

static

QoS Snippet that enables security using the Builtin Security Plugins.

To enable the use of the Builtin DDS Security Library apply this QoS Snippet to the QoS Profile used to create your DDS::DomainParticipant. For example:

<qos_profile name="MyProfile">
     <base_name>
         <element>BuiltinQosLib::Feature.Security.Enable</element>
     </base_name>
 </qos_profile>

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_SNIPPET_LIB

String-version: "Feature.Security.Enable"

◆ SNIPPET_FEATURE_TOPIC_QUERY_ENABLE

System::String ^ DDS::BuiltinQosProfiles::SNIPPET_FEATURE_TOPIC_QUERY_ENABLE

static

QoS Snippet that enables Topic Query.

To enable the use of the RTI Connext DDS::TopicQuery feature, apply this QoS Snippet to the QoS Profile used to create your DDS::DataWriter. For example:

<qos_profile name="MyProfile">
     <base_name>
         <element>BuiltinQosLib::Feature.TopicQuery.Enable</element>
     </base_name>
 </qos_profile>

For more information on Topic Query see the "Topic Queries" chapter in the User's Manual.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_SNIPPET_LIB

String-version: "Feature.TopicQuery.Enable"

◆ SNIPPET_TRANSPORT_TCP_LAN_CLIENT

System::String ^ DDS::BuiltinQosProfiles::SNIPPET_TRANSPORT_TCP_LAN_CLIENT

static

Initial value:

=

gcnew System::String(DDS_SNIPPET_TRANSPORT_TCP_LAN_CLIENT)

QoS Snippet that configures a TCP LAN Client over DDS.

This QoS Snippet sets all the mandatory properties; however the final QoS Profile requires additional configuration.

The values of the initial_peers and the property dds.transport.TCPv4.tcp1.server_bind_port are incorrect (just sample strings). Therefore, they must be modified:

initial_peers: should point to the remote client IP and port.
server_bind_port: is the port this application will be using.

This modification should be done in the QoS Profile that will be used to create the DDS::Entity. These new values will overwrite the current invalid values.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_SNIPPET_LIB

String-version: "Transport.TCP.LAN.Client"

◆ SNIPPET_TRANSPORT_TCP_WAN_SYMMETRIC_CLIENT

System::String ^ DDS::BuiltinQosProfiles::SNIPPET_TRANSPORT_TCP_WAN_SYMMETRIC_CLIENT

static

QoS Snippet that configures a symmetric WAN TCP Client over DDS.

This QoS Snippet sets all the mandatory properties; however the final QoS Profile requires additional configuration.

The values of the properties dds.transport.TCPv4.tcp1.public_address and dds.transport.TCPv4.tcp1.server_bind_port are incorrect (just sample strings). Also the initial_peers information is not correct. Therefore, the following must be modified:

initial_peers: should point to the remote client IP and port.
public_address: public IP address where this application can be reached.
server_bind_port: port this application will be using.

This modification should be done in the QoS Profile that will be used to create the DDS::Entity. These new values will overwrite the current invalid values.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_SNIPPET_LIB

String-version: "Transport.TCP.WAN.Symmetric.Client"

◆ SNIPPET_TRANSPORT_TCP_WAN_ASYMMETRIC_SERVER

System::String ^ DDS::BuiltinQosProfiles::SNIPPET_TRANSPORT_TCP_WAN_ASYMMETRIC_SERVER

static

QoS Snippet that an asymmetric WAN TCP Server over DDS.

This QoS Snippet sets all the mandatory properties; however the final QoS Profile requires additional configuration.

The values of the properties dds.transport.TCPv4.tcp1.public_address and dds.transport.TCPv4.tcp1.server_bind_port are incorrect (just sample strings). Therefore, they must be modified to the corresponding public_address and port_number. This modification should be done in the QoS Profile that will be used to create the DDS::Entity. These new values will overwrite the current invalid values.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_SNIPPET_LIB

String-version: "Transport.TCP.WAN.Asymmetric.Server"

◆ SNIPPET_TRANSPORT_TCP_WAN_ASYMMETRIC_CLIENT

System::String ^ DDS::BuiltinQosProfiles::SNIPPET_TRANSPORT_TCP_WAN_ASYMMETRIC_CLIENT

static

QoS Snippet that configures an asymmetric WAN TCP Client over DDS.

This QoS Snippet sets all the mandatory properties; however the final QoS Profile requires additional configuration.

The value of discovery.initial_peers and public_ip have to match the values set on the Server side (DDS::BuiltinQosProfiles::SNIPPET_TRANSPORT_TCP_WAN_ASYMMETRIC_SERVER). This modification should be done in the QoS Profile that will be used to create the DDS::Entity. This new value will overwrite the current invalid value.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_SNIPPET_LIB

String-version: "Transport.TCP.WAN.Asymmetric.Client"

◆ SNIPPET_COMPATIBILITY_CONNEXT_MICRO_VERSION_2_4_3

System::String ^ DDS::BuiltinQosProfiles::SNIPPET_COMPATIBILITY_CONNEXT_MICRO_VERSION_2_4_3

static

QoS Snippet that configures sets LIVELINESS QoS to be compatible with RTI Connext Micro 2.4.3.

QoS Snippet that sets the DDS::DataReaderQos and DDS::DataWriterQos DDS::LivelinessQosPolicyKind to MANUAL_BY_TOPIC_LIVELINESS_QOS It also disables the built-in shared memory transport.

Modified QoS Parameters:

RTI Connext Micro versions 2.4.3 and earlier only supported MANUAL_BY_TOPIC_LIVELINESS_QOS DDS::LivelinessQosPolicyKind. In order to be compatible with RTI Connext Micro 2.4.3, the DDS::DataReader and DDS::DataWriter must have their DDS::LivelinessQosPolicyKind changed to this value because the default kind in RTI Connext is AUTOMATIC_LIVELINESS_QOS.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_SNIPPET_LIB

String-version: "Compatibility.ConnextMicro.Version243"

◆ SNIPPET_COMPATIBILITY_OTHER_DDS_VENDORS_ENABLE

System::String ^ DDS::BuiltinQosProfiles::SNIPPET_COMPATIBILITY_OTHER_DDS_VENDORS_ENABLE

static

QoS Snippet that configures RTI Connext to interoperate with other DDS vendors.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_SNIPPET_LIB

String-version: "Compatibility.OtherDDSVendor.Enable"

◆ SNIPPET_5_1_0_TRANSPORT_ENABLE

System::String ^ DDS::BuiltinQosProfiles::SNIPPET_5_1_0_TRANSPORT_ENABLE

static

QoS Snippet that configures RTI Connext to interoperate with RTI Connext 5.1.0 and below for UDPv6 and SHMEM transports.

In Library: DDS::BuiltinQosProfiles::BUILTIN_QOS_SNIPPET_LIB

String-version: "Compatibility.510Transport.Enable"

Classes

Variables

Detailed Description

Variable Documentation

◆ BUILTIN_QOS_LIB

◆ PROFILE_BASELINE_ROOT

◆ PROFILE_BASELINE

◆ PROFILE_BASELINE_5_0_0

◆ PROFILE_BASELINE_5_1_0

◆ PROFILE_BASELINE_5_2_0

◆ PROFILE_BASELINE_5_3_0

◆ PROFILE_BASELINE_6_0_0

◆ PROFILE_BASELINE_6_1_0

◆ PROFILE_GENERIC_COMMON

◆ PROFILE_GENERIC_MONITORING_COMMON

◆ PROFILE_GENERIC_CONNEXT_MICRO_COMPATIBILITY

◆ PROFILE_GENERIC_CONNEXT_MICRO_COMPATIBILITY_2_4_9

◆ PROFILE_GENERIC_CONNEXT_MICRO_COMPATIBILITY_2_4_3

◆ PROFILE_GENERIC_OTHER_DDS_VENDOR_COMPATIBILITY

◆ PROFILE_GENERIC_510_TRANSPORT_COMPATIBILITY

◆ PROFILE_GENERIC_SECURITY

◆ BUILTIN_QOS_LIB_EXP

◆ PROFILE_GENERIC_STRICT_RELIABLE

◆ PROFILE_GENERIC_KEEP_LAST_RELIABLE

◆ PROFILE_GENERIC_BEST_EFFORT

◆ PROFILE_GENERIC_STRICT_RELIABLE_HIGH_THROUGHPUT

◆ PROFILE_GENERIC_STRICT_RELIABLE_LOW_LATENCY

◆ PROFILE_GENERIC_PARTICIPANT_LARGE_DATA

◆ PROFILE_GENERIC_PARTICIPANT_LARGE_DATA_MONITORING

◆ PROFILE_GENERIC_STRICT_RELIABLE_LARGE_DATA

◆ PROFILE_GENERIC_KEEP_LAST_RELIABLE_LARGE_DATA

◆ PROFILE_GENERIC_STRICT_RELIABLE_LARGE_DATA_FAST_FLOW

◆ PROFILE_GENERIC_STRICT_RELIABLE_LARGE_DATA_MEDIUM_FLOW

◆ PROFILE_GENERIC_STRICT_RELIABLE_LARGE_DATA_SLOW_FLOW

◆ PROFILE_GENERIC_KEEP_LAST_RELIABLE_LARGE_DATA_FAST_FLOW

◆ PROFILE_GENERIC_KEEP_LAST_RELIABLE_LARGE_DATA_MEDIUM_FLOW

◆ PROFILE_GENERIC_KEEP_LAST_RELIABLE_LARGE_DATA_SLOW_FLOW

◆ PROFILE_GENERIC_KEEP_LAST_RELIABLE_TRANSIENT_LOCAL

◆ PROFILE_GENERIC_KEEP_LAST_RELIABLE_TRANSIENT

◆ PROFILE_GENERIC_KEEP_LAST_RELIABLE_PERSISTENT

◆ PROFILE_GENERIC_AUTO_TUNING

◆ PROFILE_GENERIC_MINIMAL_MEMORY_FOOTPRINT

◆ PROFILE_PATTERN_PERIODIC_DATA

◆ PROFILE_PATTERN_STREAMING

◆ PROFILE_PATTERN_RELIABLE_STREAMING

◆ PROFILE_PATTERN_EVENT

◆ PROFILE_PATTERN_ALARM_EVENT

◆ PROFILE_PATTERN_STATUS

◆ PROFILE_PATTERN_ALARM_STATUS

◆ PROFILE_PATTERN_LAST_VALUE_CACHE

◆ BUILTIN_QOS_SNIPPET_LIB

◆ SNIPPET_OPTIMIZATION_RELIABILITY_PROTOCOL_COMMON

◆ SNIPPET_OPTIMIZATION_RELIABILITY_PROTOCOL_KEEP_ALL

◆ SNIPPET_OPTIMIZATION_RELIABILITY_PROTOCOL_KEEP_LAST

◆ SNIPPET_OPTIMIZATION_RELIABILITY_PROTOCOL_HIGH_RATE

◆ SNIPPET_OPTIMIZATION_RELIABILITY_PROTOCOL_LOW_LATENCY

◆ SNIPPET_OPTIMIZATION_RELIABILITY_PROTOCOL_LARGE_DATA

◆ SNIPPET_OPTIMIZATION_DATACACHE_LARGE_DATA_DYNAMICMEMALLOC

◆ SNIPPET_OPTIMIZATION_DISCOVERY_COMMON

◆ SNIPPET_OPTIMIZATION_DISCOVERY_PARTICIPANT_COMPACT

◆ SNIPPET_OPTIMIZATION_DISCOVERY_ENDPOINT_FAST

◆ SNIPPET_OPTIMIZATION_TRANSPORT_LARGE_BUFFERS

◆ SNIPPET_QOS_POLICY_RELIABILITY_RELIABLE

◆ SNIPPET_QOS_POLICY_RELIABILITY_BEST_EFFORT

◆ SNIPPET_QOS_POLICY_HISTORY_KEEP_LAST_1

◆ SNIPPET_QOS_POLICY_HISTORY_KEEP_ALL

◆ SNIPPET_QOS_POLICY_PUBLISH_MODE_ASYNCHRONOUS

◆ SNIPPET_QOS_POLICY_DURABILITY_TRANSIENT_LOCAL

◆ SNIPPET_QOS_POLICY_DURABILITY_TRANSIENT

◆ SNIPPET_QOS_POLICY_DURABILITY_PERSISTENT

◆ SNIPPET_QOS_POLICY_BATCHING_ENABLE

◆ SNIPPET_FEATURE_FLOW_CONTROLLER_838MBPS

◆ SNIPPET_FEATURE_FLOW_CONTROLLER_209MBPS

◆ SNIPPET_FEATURE_FLOW_CONTROLLER_52MBPS

◆ SNIPPET_FEATURE_AUTO_TUNING_ENABLE

◆ SNIPPET_FEATURE_MONITORING_ENABLE

◆ SNIPPET_FEATURE_SECURITY_ENABLE

◆ SNIPPET_FEATURE_TOPIC_QUERY_ENABLE

◆ SNIPPET_TRANSPORT_TCP_LAN_CLIENT

◆ SNIPPET_TRANSPORT_TCP_WAN_SYMMETRIC_CLIENT