RTI Connext Modern C++ API
Version 6.1.2
|
Transport plug-in using UDP/IPv4 for WAN communications. More...
Classes | |
struct | NDDS_Transport_UDPv4_WAN_Property_t |
Configurable IPv4/UDP WAN Transport-Plugin properties. More... | |
Macros | |
#define | NDDS_TRANSPORT_UDPV4_WAN_PROPERTY_DEFAULT |
Use this to initialize a NDDS_Transport_UDPv4_WAN_Property_t structure. More... | |
Functions | |
NDDS_Transport_Plugin * | NDDS_Transport_UDPv4_WAN_new (const struct NDDS_Transport_UDPv4_WAN_Property_t *property_in) |
Create an instance of a UDPv4_WAN Transport Plugin. More... | |
Transport plug-in using UDP/IPv4 for WAN communications.
RTI Real-Time WAN Transport (RWT) is a transport that enables secure, scalable, and high-performance communication over wide area networks (WANs), including public networks.
It extends RTI Connext capabilities to WAN environments. Real-Time WAN Transport uses UDPv4 as the underlying IP transport-layer protocol to better anticipate and adapt to the challenges of diverse network conditions, device mobility, and the dynamic nature of WAN system architectures.
Real-Time WAN Transport, in combination with RTI Cloud Discovery Service (CDS), provides a complete, seamless solution out of the box for WAN connectivity.
This transport is not installed as part of an RTI Connext package; it must be downloaded and installed separately.
Real-Time WAN Transport replaces the transport capabilities of the Secure WAN Transport optionally available with previous RTI Connext releases, and provides the following capabilities:
Real-Time WAN Transport does not require third-party components, such as STUN servers, or protocols like SIP to handle session establishment. Using a single API and security model, you can leverage the extensive capabilities of the RTI Connext framework and ecosystem, including tools and infrastructure services, even for real-time connectivity from edge to cloud and back in highly distributed systems that communicate across wide area networks.
This transport plugin uses UDPv4 sockets to send and receive messages. It supports unicast communications in a single instance of the plugin. By default, this plugin will use all interfaces that it finds enabled and "UP" at instantiation time to send and receive messages.
In addition, you can configure an instance of this plugin to selectively use the network interfaces of a node by specifying the "white" and "black" lists in the base property's fields (NDDS_Transport_Property_t::allow_interfaces_list, NDDS_Transport_Property_t::deny_interfaces_list).
RTI Connext can implicitly create this plugin and register with the dds::domain::DomainParticipant if this transport is specified in rti::core::policy::TransportBuiltin.
To specify the properties of the Real-Time WAN Transport that is implicitly registered, you can either:
Note that all properties should be set before the transport is implicitly created and registered by RTI Connext. Any properties set after the builtin transport is registered will be ignored. See Built-in Transport Plugins for details on when a builtin transport is registered.
For additional details on how to configure and use the Real-Time WAN Transport, see the Core Libraries User's Manual.
The following table lists the predefined property names that can be set in the dds::domain::qos::DomainParticipantQos::property to configure the Real-Time WAN Transport plugin.
Property Name | Description |
---|---|
dds.transport.UDPv4_WAN.builtin.parent.classid | See NDDS_Transport_Property_t::classid |
dds.transport.UDPv4_WAN.builtin.parent.address_bit_count | See NDDS_Transport_Property_t::address_bit_count |
dds.transport.UDPv4_WAN.builtin.parent.properties_bitmap | See NDDS_Transport_Property_t::properties_bitmap |
dds.transport.UDPv4_WAN.builtin.parent.gather_send_buffer_count_max | See NDDS_Transport_Property_t::gather_send_buffer_count_max |
dds.transport.UDPv4_WAN.builtin.parent.message_size_max | See NDDS_Transport_Property_t::message_size_max |
dds.transport.UDPv4_WAN.builtin.parent.allow_interfaces | See NDDS_Transport_Property_t::allow_interfaces_list and NDDS_Transport_Property_t::allow_interfaces_list_length. Interfaces should be specified as comma-separated strings, with each comma delimiting an interface. For example, 127.0.0.1,eth0 |
dds.transport.UDPv4_WAN.builtin.parent.deny_interfaces | See NDDS_Transport_Property_t::deny_interfaces_list and NDDS_Transport_Property_t::deny_interfaces_list_length. Interfaces should be specified as comma-separated strings, with each comma delimiting an interface. For example: 127.0.0.1,eth0 |
dds.transport.UDPv4_WAN.builtin.parent.thread_name_prefix | See NDDS_Transport_Property_t::thread_name_prefix |
dds.transport.UDPv4_WAN.builtin.send_socket_buffer_size | See NDDS_Transport_UDPv4_WAN_Property_t::send_socket_buffer_size |
dds.transport.UDPv4_WAN.builtin.recv_socket_buffer_size | See NDDS_Transport_UDPv4_WAN_Property_t::recv_socket_buffer_size |
dds.transport.UDPv4_WAN.builtin.ignore_loopback_interface | See NDDS_Transport_UDPv4_WAN_Property_t::ignore_loopback_interface |
dds.transport.UDPv4_WAN.builtin.ignore_nonrunning_interfaces | See NDDS_Transport_UDPv4_WAN_Property_t::ignore_nonrunning_interfaces |
dds.transport.UDPv4_WAN.builtin.ignore_nonup_interfaces | [DEPRECATED] See NDDS_Transport_UDPv4_WAN_Property_t::ignore_nonup_interfaces |
dds.transport.UDPv4_WAN.builtin.no_zero_copy | [DEPRECATED] See NDDS_Transport_UDPv4_WAN_Property_t::no_zero_copy |
dds.transport.UDPv4_WAN.builtin.send_blocking | See NDDS_Transport_UDPv4_WAN_Property_t::send_blocking |
dds.transport.UDPv4_WAN.builtin.transport_priority_mask | See NDDS_Transport_UDPv4_WAN_Property_t::transport_priority_mask |
dds.transport.UDPv4_WAN.builtin.transport_priority_mapping_low | See NDDS_Transport_UDPv4_WAN_Property_t::transport_priority_mapping_low |
dds.transport.UDPv4_WAN.builtin.transport_priority_mapping_high | See NDDS_Transport_UDPv4_WAN_Property_t::transport_priority_mapping_high |
dds.transport.UDPv4_WAN.builtin.send_ping | See NDDS_Transport_UDPv4_WAN_Property_t::send_ping |
dds.transport.UDPv4_WAN.builtin.force_interface_poll_detection | See NDDS_Transport_UDPv4_WAN_Property_t::force_interface_poll_detection |
dds.transport.UDPv4_WAN.builtin.interface_poll_period | See NDDS_Transport_UDPv4_WAN_Property_t::interface_poll_period |
dds.transport.UDPv4_WAN.builtin.protocol_overhead_max | See NDDS_Transport_UDPv4_WAN_Property_t::protocol_overhead_max |
dds.transport.UDPv4_WAN.builtin.disable_interface_tracking | See NDDS_Transport_UDPv4_WAN_Property_t::disable_interface_tracking |
dds.transport.UDPv4_WAN.builtin.public_address | See NDDS_Transport_UDPv4_WAN_Property_t::public_address |
dds.transport.UDPv4_WAN.builtin.comm_ports | See NDDS_Transport_UDPv4_WAN_Property_t::comm_ports_list |
dds.transport.UDPv4_WAN.builtin.port_offset | See NDDS_Transport_UDPv4_WAN_Property_t::port_offset |
dds.transport.UDPv4_WAN.builtin.binding_ping_period | See NDDS_Transport_UDPv4_WAN_Property_t::binding_ping_period |
#define NDDS_TRANSPORT_UDPV4_WAN_PROPERTY_DEFAULT |
Use this to initialize a NDDS_Transport_UDPv4_WAN_Property_t structure.
NDDS_Transport_Plugin* NDDS_Transport_UDPv4_WAN_new | ( | const struct NDDS_Transport_UDPv4_WAN_Property_t * | property_in | ) |
Create an instance of a UDPv4_WAN Transport Plugin.
An application may create and register multiple instances of this Transport Plugin with RTI Connext. Multiple instances of the plugin may be useful for partitioning the network interfaces across multiple RTI Connext domains. However, note that the underlying transport, the operating system's IP layer, is still a "singleton." For example, if a unicast transport has already bound to a port, and another unicast transport tries to bind to the same port, the second attempt will fail.
The transport plugin honors the interface "white" and "black" lists specified in the NDDS_Transport_UDP_Property_t::parent:
The format of a string in these lists is assumed to be in standard IPv4 dot notation, possibly containing wildcards. For example:
property_in | <<in>> Desired behavior of this transport. May be NULL for default property. |