qos

Understanding Instance States

This article explains what Instances and Instance States are, describes how they apply whether you use them or not, and clears up some common configurations affecting Instance States. ...
kieranb
Mon, 05/24/2021 - 04:57
3602 reads — 0 comments

Configuring Resource Limits in Connext DDS Micro

Unlike Connext DDS Professional, Connext DDS Micro only supports finite resource limits to ensure that memory growth is bounded. Configuring these limits is therefore an important part of the system design. Here are some considerations to help you determine the optimal resource limits: How many ...
lthesing
Thu, 12/17/2020 - 02:52
4034 reads — 0 comments

Using your own QoS profile in RTI Admin Console

RTI Admin Console uses several non-default QoS settings when interacting with Topics that are used to communicate with other RTI products. The out-of-the-box settings attempt to satisfy the majority of use cases customers have with other configurations, but sometimes it is necessary to change these ...
jcpulido
Mon, 05/04/2020 - 04:16
34425 reads — 1 comment

How do I load QoS profiles via source code in Modern C++?

It is possible to create an Entity (a DataReader , DataWriter, or DomainParticipant ) with a QoS profile defined in the USER_QOS_PROFILES.xml file. In the Java, C, Traditional C++ and .NET APIs, there are methods such as: DDS_Publisher_create_datawriter_with_profile() Depending on what kind of ...
israel
Fri, 12/23/2016 - 06:57
5684 reads — 0 comments

Why isn't unregister_instance disposing instances with asynchronous publication?

Setting the PUBLISH_MODE QoS Policy's kind to ASYNCHRONOUS_PUBLISH_MODE allows you to make non-blocking write() calls. This means that instead of sending a sample before returning from write() , the data is enqueued and sent according to a flow controller. The HISTORY QoS Policy determines the size ...
Benito Palacios
Thu, 03/10/2016 - 05:44
3363 reads — 0 comments

What settings affect DomainParticipant’s liveliness?

Participants are able to know when other participants in the same domain are reachable or not (alive or dead). This is called Participant’s Liveliness. Discovery_Config QosPolicy has three properties that define this Participant’s Liveliness behavior: participant_liveliness_assert_period is the ...
Sandra Rodriguez
Fri, 11/27/2015 - 08:30
11476 reads — 0 comments

Effect of TRANSPORT_PRIORITY Qos Policy on the metatraffic (Heartbeats, Acks, Nacks, Gaps)

The TRANSPORT_PRIORITY DataWriter Qos Policy controls the transport-level priority settings. Each transport maps it to a transport-specific prioritization mechanism which in the case of UDP are the IP packet diffserv ToS/DSCP bits . Out-of-the box this feature is not enabled, but this forum thread ...
Gerardo Pardo
Tue, 02/11/2014 - 20:02
4343 reads — 0 comments

How to send big TypeCodes and TypeObjects

Note : Applies to RTI Connext 4.x and above. In this solution we show how to configure RTI Connext to send TypeCodes and TypeObjects larger than the default maximum serialized sizes (2kB and 3kB respectively). In this example, the modifications needed to the transport settings are shown for the UDPv4 builtin transport. ...
jose
Tue, 06/18/2013 - 08:04
18818 reads — 1 comment

How to check the size of the topic's TypeCode using RTI Monitor

Note : Applies to RTI Connext 4.5d and above. This solution shows how to check the size of the topic’s TypeCode using RTI Monitor . It consists of two steps: Enable RTI Monitoring Library in the application. Acess to TypeCode's information from RTI Monitor. Enable RTI Monitoring Library in the ...
jose
Mon, 06/17/2013 - 14:51
9769 reads — 0 comments

How can I load a personalized QoS profile in RTI DDS Toolkit for LabVIEW?

QoS profiles provide a way to configure your DDS application, defining most aspects of the DDS paradigm and the underlying communication mechanisms. As part of RTI DDS Toolkit for LabVIEW we provide a set of pre-defined QoS profiles. These profiles solve general use cases such as a Reliable ...
sara
Wed, 05/29/2013 - 07:20
11545 reads — 0 comments

Pages

Subscribe to RSS - qos