Partition settings with Admin Console

3 posts / 0 new
Last post
Offline
Last seen: 3 years 2 weeks ago
Joined: 01/15/2018
Posts: 8
Partition settings with Admin Console

Hello,

Recently we started using partition in our QoS profiles. Unfortunately once we did that, we stopped seeing messages coming in using the RTI Admin Console.

I am just wondering if there is anything that can help me to get the messages showing up in the console again. When running the Admin Console, we select the same qos profile as the external software.

Is there another built-in QoS profile that I can take a look?

Thanks,

Tyler

Howard's picture
Offline
Last seen: 4 hours 8 min ago
Joined: 11/29/2012
Posts: 601

When you subscribe to data in AdminConsole, there is an "Advanced Settings" page, in which you can set a Partition.  Actually by default the "*" Partition is set and so you should be able to receive the data from publications in any partition.

If you're not seeing data in AdminConsole, have you confirmed that it's a Partition mismatch that's the reason you're not getting data?  You can check the match analysis view for all of the possible ways that the DataWriter and DataReader are not matching:

Offline
Last seen: 3 years 2 weeks ago
Joined: 01/15/2018
Posts: 8

Thank you! Yes, I see the partition textbox and add '*' resolved it for me!

Tyler