RTI Connext Migration Guide

7.6.0

1. Important: How to Use this Guide
2. Upgrading from 7.5.0 to 7.6.0
- 2.1. General Compatibility 7.6.0
  - 2.1.1. Wire Compatibility
    - 2.1.1.1. Configure compatibility with Java keyhash calculation in previous releases
- 2.2. Product-Specific Compatibility 7.6.0
3. Upgrading from 7.4.0 to 7.5.0
- 3.1. General Compatibility 7.5.0
  - 3.1.1. Wire Compatibility
    - 3.1.1.1. DataReader in 7.5.0 may not interoperate with DataWriter in previous release when using XCDR and mutable unions
- 3.2. Product-Specific Compatibility 7.5.0
4. Upgrading from 7.3.1 to 7.4.0
- 4.1. General Compatibility 7.4.0
  - 4.1.1. Wire Compatibility
    - 4.1.1.1. RTPS Versions
    - 4.1.1.2. Best-effort DataReader from before 6.1.0 cannot receive MultiChannel RTPS fragmented data from synchronous DataWriter in 7.4.0
  - 4.1.2. Transport Compatibility
    - 4.1.2.1. Real-Time WAN Transport updated message_size_max value may cause messages to be dropped from previous versions
- 4.2. Product-Specific Compatibility 7.4.0
5. Upgrading from 7.3.0 to 7.3.1
- 5.1. General Compatibility 7.3.1
  - 5.1.1. Wire Compatibility
    - 5.1.1.1. RTPS Versions
    - 5.1.1.2. New requirement if you interoperate with DDS vendors that produce multiple RTPS messages in a single datagram
- 5.2. Product-Specific Compatibility 7.3.1
6. Upgrading from 6.1.2 to 7.3.0
- 6.1. General Compatibility 7.3.0
  - 6.1.1. Wire Compatibility
    - 6.1.1.1. RTPS Versions
    - 6.1.1.2. New default RTPS checksum mechanism
- 6.2. Product-Specific Compatibility 7.3.0
7. Upgrading from 6.1.0 to 6.1.2
- 7.1. General Compatibility 6.1.2
  - 7.1.1. Potential -fPIC flag issue when using static libraries in Linux and QNX if upgrading from 6.1.0
- 7.2. Product-Specific Compatibility 6.1.2
8. Upgrading from 6.0.1 to 6.1.0
- 8.1. General Compatibility 6.1.0
- 8.2. Product-Specific Compatibility 6.1.0
9. Upgrading from 6.0.0 to 6.0.1
- 9.1. General Compatibility 6.0.1
- 9.2. Product-Specific Compatibility 6.0.1
10. Upgrading from 5.3.1 to 6.0.0
- 10.1. General Compatibility 6.0.0
- 10.2. Product-Specific Compatibility 6.0.0
11. Regressions
12. Changes to This Document

Copyrights and Notices

RTI Connext Migration Guide

10. Upgrading from 5.3.1 to 6.0.0
10.2. Product-Specific Compatibility 6.0.0
10.2.15. RTI Monitor
View page source

10.2.15. RTI Monitor

Monitor is built on top of Connext. Therefore, you should refer to Section 10.1 and Section 10.2.1 for compatibility information in Connext 6.

See also Section 10.1.1.2.

Previous Next

© Copyright 2019-2025, Real-Time Innovations, Inc.

Built with Sphinx using a theme provided by Read the Docs.

Send feedback about this document to documentation@rti.com.